Transcript
Specification Sheet
USC3 Series
3/12/2016
Project:
USC3 Series - Roadway Lighting
Catalog#:
(50-250W HPS / 50 - 150W PSMH)
Utility HID Fixture
Approved by:
Features
• Meets ANSI requirements for Side MountedHorizontal Lamp Luminaires, including ANSI C136.2, C136.3, C136.10, C136.14, C136.15, and C136.17. • Rugged die-cast aluminum housing - is thermally set polyester powder coated for durability with 3 mils nominal paint thickness and corrosion resistant rated 500 hours salt spray endurance. • Two-bolt mast arm mount provides easy, secure installation and adjustability for arms from 1-1/4” to 2” (1-5/8” to 2-3/8” O.D.) diameter. • Wildlife shield is standard • +6˚/-3˚ of leveling adjustment • Lens Replacement without tools • Low copper aluminum for use in coastal areas • Available in IESNA Type II and III light distribution patterns and Full Cutoff version • Available with acrylic, polycarbonate, or glass refractors • Available with photocontrol and lamp • Tested to withstand 3G vibration
USC3 series is designed for 2 in. fitter to allow 1-1/4” to 2” mast arm without the use of an adaptor. Applications: Provides excellent roadway lighting for local roads, residential streets, parking areas, rural roads, and intersections.
Standard Package Includes • • • • •
ASA70 Gray Powdercoat Paint Finish Tool-less Adjustable Photocontrol Receptacle Heavy Duty Terminal Block Open Board Ignitor (if required) Wildlife Shield
DIMENSIONS 20.7"
Effective Projected Area (EPA) with Drop Lens - 1.1 ft2 max with Flat Lens - 0.8 ft2 max
20.7"
HPS: suitable for -40˚C to 40˚C MH/PSMH: suitable for -30˚C to 40˚C 16 AWG 200˚C rated internal wiring Toolless latch door closure standard 13.4"
13.4"
8.7"
12.8"
Specifications subject to change without notice. Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443 (toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652 www.HowardLightingProducts.com
Specification Sheet
USC3 Series
USC3 Series - Roadway Lighting
Project:
Utility HID Fixture
Catalog#: Approved by: Ordering Information Model Family
Lens Option
Lamp Wattage
Lamp Type
Ballast/Input Volts
Options**
Options/ Packaging
Reserved for Factory Use
USC3
G
15
S
XNM4
000
I
000
G3: Drop Glass / Type III A3: Drop Acrylic / Type III P2: Drop Polycarb / Type II P3: Drop Polycarb / Type III F3: Flat Glass / Type III
05: 50W 07: 70W 10: 100W 15: 150W 20: 200W 25: 250W
S: High Pressure Sodium M: Metal Halide P: Pulse Start MH D: Dual Arc Tube HPS
0000: Ballast not included RN02: Reactor-normal power factor-120v RH02: Reactor-high power factor-120v XNM1: HX ballast-normal PF-MultiTap (wired 120v) XNM2: HX ballast-normal PF-MultiTap (wired 208v) XNM3: HX ballast-normal PF-MultiTap (wired 240v) XNM4: HX ballast-normal PF-MultiTap (wired 277v) XHM1: HX ballast-high PF-MultiTap (wired 120v) XHM2: HX ballast-high PF-MultiTap (wired 208v) XHM3: HX ballast-high PF-MultiTap (wired 240v) XHM4: HX ballast-high PF-MultiTap (wired 277v CWM1: CWA ballast-high PF-MultiTap (wired 120v) CWM2: CWA ballast-high PF-MultiTap (wired 208v) CWM3: CWA ballast-high PF-MultiTap (wired 240v) CWM4: CWA ballast-high PF-MultiTap (wired 277v)
000: No special option required Starter/ignitor options*** N: None included E: Encapsulated plug-in starter T: Starter Stopper™ Accessory
I: Single X: Special
TBA
Photocontrol options S: Shortening cap P: Photoelectric control included**** V: Surge protection L: Special lamp requirement Z: Special paint request
* Consult factory for option codes for combinations of accessories. **Open Style Plug-in Starter included as standard. *** P-control suitable for specified input voltage only.
USC3 G3 15 S XNM4 000 I 000 Reserved for factory use
Utility grade Small Cobra head With Glass Drop Lens & Type III reflector 150w HPS HX NPS ballast wired for 277v No special options selected Individual boxed unit
Preferred Model Numbers USC3 A3 25 S CWM1 000 I 000 USC3 F3 10 S RN02 000 I 000 USC3 F3 10 S XH3 000 I 000 USC3 G3 25 S CWM1 OEP I 000
Specifications subject to change without notice. Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443 (toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652 www.HowardLightingProducts.com
Specification Sheet
USC3 Series
3/12/2016
Project:
USC3 Series - Roadway Lighting
Catalog#:
Utility HID Fixture
(50-250W HPS / 50 - 150W PSMH)
Approved by: Ballast Availability Ballast/Input Volts RN02 HPS Reactor-normal power factor-120v RH02 HPS Reactor-high power factor-120v RN08 MH Reactor-normal power factor-277v RH08 MH Reactor-high power factor-277v XNM1 HPS HX ballast-normal PF-MultiTap (wired 120v) XNM2 HPS HX ballast-normal PF-MultiTap (wired 208v) XNM3 HPS HX ballast-normal PF-MultiTap (wired 240v) XNM4 HPS HX ballast-normal PF-MultiTap (wired 277v) XNM1 MH HX ballast-normal PF-MultiTap (wired 120v) XNM2 MH HX ballast-normal PF-MultiTap (wired 208v) XNM3 MH HX ballast-normal PF-MultiTap (wired 240v) XNM4 MH HX ballast-normal PF-MultiTap (wired 277v) XHM1 HPS HX ballast-high PF-MultiTap (wired 120v) XHM2 HPS HX ballast-high PF-MultiTap (wired 208v) XHM3 HPS HX ballast-high PF-MultiTap (wired 240v) XHM1 MH HX ballast-high PF-MultiTap (wired 120v) XHM2 MH HX ballast-high PF-MultiTap (wired 208v) XHM3 MH HX ballast-high PF-MultiTap (wired 240v) XHM4 MH HX ballast-high PF-MultiTap (wired 277v) CWM1 HPS CWA ballast-high PF-MultiTap (wired 120v) CWM2 HPS CWA ballast-high PF-MultiTap (wired 208v) CWM3 HPS CWA ballast-high PF-MultiTap (wired 240v) CWM4 HPS CWA ballast-high PF-MultiTap (wired 277v) Y Y1 Y2
50
70
100
150
Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2
Y Y Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2 Y2
Y Y Y2 Y2 Y2 Y2 Y2 Y2 Y Y Y Y Y2 Y2 Y2 Y Y Y Y
Y Y Y2 Y2 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
Y2 Y2 Y2 Y2 Y2
150/100V
03S 05S 07S or D 10S or D 15S or D 20S or D 25S or D 05P 07P 10P 15P
A2
A3
P2
P3
P P P P P P P P P P P
P P P P P
P P P P P P P P P P P
P P P P P
P P P P P
P P P P
P P P P
P P P P
Specifications subject to change without notice. Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443 (toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652 www.HowardLightingProducts.com
Y Y Y Y
Y Y Y Y
Y1 Y1 Y1
*CWM1-CWM4 MH CWA (250W M58) is available as “Export Only”
G3
250
Y1 Y1 Y1 Y1
Available For S56 150W 100V HPS Lamp Not a stock item - consult Customer Service for leadtime Not planned for release
Optics Chart
200
F2
F3
P P P P P P P P P P P
