Transcript
User gUide
Model: BAB2095U/BAB2095MU
SWIFT STRAIGHTENER
Thin Easy to Curl Hair
Normal Textured Hair
Wavy Curly Hair
Coarse Very Thick Hair
230° 220° 210° 200° 190° 180° 170° 160° 150° 140°
Fragile Very Fine Hair
Features: • 230°C high heat • Advanced Floating Ceramics with Nano Titanium Technology • Ultra fast heat up • 10 variable temperature settings 140°C - 230°C • Digital temperature control • Temperature memory function • Automatic switch off after 72 minutes • On/off switch • Salon length swivel cord • Available in Black and Hot Pink
140°C
160°C
190°C
210°C
230°C
INSTRUCTIONS FOR USE •P lug the appliance into a suitable mains socket and push the on/off (0/I) button once to switch unit on. •T he temperature will heat up to 180˚C in seconds. You will be able to view the temperature on the digital display on the outer casing. •U se the temperature buttons (+/-) to select the desired temperature, the temperatures will increase or decrease in 10°C increments for specific temperature control (between 140°C to 230°C). • The display will flash 3 times to confirm the temperature has been selected. The display will show the exact temperature when heating up. • After use, push the on/off (0/I) button once to switch unit off and unplug the appliance. • Allow to cool before storing away. Temperature Memory Function: The temperature memory function is suitable when a prefered temperature is required for each use by pushing the (M) button. • To programme your desired temperature, ensure the unit is switched on, then simply select the temperature you require by using the temperature buttons (+/-) and by viewing the digital display. • Hold down the (M) memory button for 3 seconds, the display will flash 3 times to confirm the temperature has been stored. This will be stored in the straightener’s memory from that point and after being switched off. • When you switch the unit back on for next use, simply push the (M) memory button and your stored temperature will be automatically selected. • To reset the stored temperature, simply select a different temperature (ie. 230°C) and hold down the memory button for 3 seconds and the new temperature will then be stored.
Safety Automatic switch off: This straightener features a safety automatic switch off after 72 minutes. To use the straightener again simply push the on/off (0/I) button to switch the unit back on. If the unit is no longer required for use please ensure you unplug the appliance from the mains outlet. FOR STRAIGHTENING • Separate a section of hair. • Place the section of hair between the straightening plates, close to the roots. • Hold the hair firmly between the straightening plates and slide down the length of the hair, from root to tip. • Repeat as necessary. • Allow the hair to cool before combing through. • After use, press the button marked to switch off and unplug the appliance. CREATING CURLS • Separate a section of hair. The smaller the section the more defined the curl. The larger the section the looser the curl or wave. For best results the section should be no more than 3.5cm wide. • Take a section of hair and slide the straightener into the hair and close the plates together.
• Turn the straightener through 180º so that the hair is wrapped once around the outside of the straightener.
• Slowly glide the straightener along the length of the hair from root to tip in a downward motion. NB: Don’t close the straighteners too tightly when curling, you don’t want to pull or drag the hair.
• Release the straightener from the hair. • To ensure the curl sits neatly into place, hold the end of the section you have just curled and turn through 180° in the direction of the curl.
• Repeat as necessary.
SAFETY CAUTIONS • Please retain these instructions for future reference. • Do not use the appliance in the bathroom. • Do not use the appliance near basins or other vessels containing liquids. • Do not immerse the appliance in water or other liquids. • This appliance should only be used as described within this instruction booklet. • Always inspect the appliance before use for noticeable signs of damage. Do not use if damaged, or if the appliance has been dropped. In the event of damage, contact the Conair Customer Care Line (refer to “UK After Sales Service” section for further information). • Do not use the appliance if the cord is damaged. In the event of damage, discontinue use immediately. If the cord is damaged it must be replaced by the manufacturer. Return the appliance to the Conair Service Centre (refer to “UK After Sales Service” section for further information). • Do not leave the appliance unattended when switched on or plugged in. • Do not place the appliance on any heat sensitive surface whilst in operation. • Take care to avoid the hot surfaces of the appliance coming into direct contact with the skin, in particular the ears, eyes, face and neck. • This appliance should not be used by adults or children whose lack of experience, product knowledge or disability might cause a hazard, unless they have been correctly instructed and are adequately supervised. • Children should always be supervised to ensure that they do not play with this product. • Allow appliance to cool before storing away. • After use, do not coil the cord around the appliance as this may cause damage. Instead, coil loosely by the side of the appliance. • This appliance complies with the requirements of Directives 04/108/ EEC (Electromagnetic Compatibility) and 06/95/EEC (Electrical Safety of Domestic Appliances) amended by Directive 93/68/EEC (CE Marking).
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council office or your household waste disposal service.
CLEANING & MAINTENANCE •T he appliance may require cleaning due to a build up of residue from hair products. To clean •E nsure the appliance is switched off, unplugged and cool •U sing a damp cloth and mild detergent or soap, wipe the appliance. Ensure the appliance has dried thoroughly before re-using. IMPORTANT: Do not immerse the appliance in water or other liquids.
UK GUARANTEE This BaByliss PRO appliance is guaranteed for salon use for 6 months. This guarantee covers defects under normal use from date of purchase and ceases to be valid in the event of alteration or repair by unauthorised persons. If the appliance does not perform satisfactorily due to defects in materials or manufacture, it will be repaired or replaced through the Conair UK After Sales Service. Conair reserve the right to amend terms and specifications without prior notice. This guarantee in no way affects your statutory rights. UK AFTER SALES SERVICE For further advice on using the appliance, contact the Conair Customer Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or e-mail your enquiry to
[email protected] In Guarantee Return the product to the Conair Service Centre at the following address:
Conair Service Centre PO Box 506 WIGAN WN1 9AA
Enclose your name and address, together with proof of purchase and details of the fault. Conair will either repair or replace the product as appropriate. Out of Guarantee Contact the Conair Customer Care Line on 0870 5 133191 (09:00 to 17:00 Monday to Friday) or e-mail your enquiry to
[email protected] for details of the standard repair or replacement charge. If you wish to proceed with the repair or replacement, return the product to the
Conair Service Centre at the following address:
Conair Service Centre PO Box 506 WIGAN WN1 9AA
Enclose your name and address, together with details of the fault and cheque made payable to The Conair Group Ltd. UK WIRING INSTRUCTIONS The wires in the mains lead are coloured in accordance with the following code:
BLUE = NEUTRAL BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not correspond with the colour marking identifying the terminals on your plug, proceed as follows: • The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. • The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. • Neither core should be connected to the earth terminal of a three pin plug marked with the letter E or is coloured green or yellow. With this appliance, if a 13 amp plug is used a 5 amp fuse should be fitted. If any other type of plug is used, a 5 amp fuse must be fitted either in the plug or at the distribution board.
