Transcript
5X15W QUADRICOLOR LEDS BATTERY OPERATED WIRELESS OUTDOOR PROJECTOR
USER GUIDE 10263 - Version 1 / 01-2015
English
Page 2
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
1 - Safety information Important safety information Any maintenance procedure must be performed by a CONTEST authorised technical service. Basic cleaning operations must thoroughly follow our safety instructions.
This product contains non-isolated electrical components. Do not undertake any maintenance operation when it is switched on as it may result in electric shock.
WARNING : This unit contains no user-serviceable parts. Do not open the housing or attempt any maintenance by yourself. In the unlikely even your unit may require service, please contact your nearest dealer.
Risk of electric shock Warning This product is equipped with Class 2 LEDs. Please avoid looking directly at the beam as it may cause severe eye injuries.
In order to avoid any electrical malfunction, please do not use any multi-socket, power cord extension or connecting system without making sure they are perfectly isolated and present no defect.
Recycling your device • As HITMUSIC is really involved in the environmental cause, we only commercialise clean, ROHS compliant products. • When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Note : The legislation requires that every device set up in a public space features a double fixation bracket. This security system must hold 10 times the weight of the device.
Symbols used This symbol signals an important safety precaution.
The CAUTION symbol signals a risk of product deterioration.
The WARNING symbol signals a risk to the user’s physical integrity. The product may also be damaged.
Page 3
English
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
Instructions and recommendations 1 - Please read carefully : We strongly recommend to read carefully and understand the safety instructions before attempting to operate this unit. 2 - Please keep this manual : We strongly recommend to keep this manual with the unit for future reference. 3 - Operate carefully this product : We strongly recommend to take into consideration every safety instruction. 4 - Follow the instructions: Please carefully follow each safety instruction to avoid any physical harm or property damage. 5 - Avoid water and wet locations : Do not use this product in rain, or near washbasins or other wet locations. 6 - Installation : We strongly encourage you to only use a fixation system or support recommended by the manufacturer or supplied with this product. Carefully follow the installation instructions and use the adequate tools. Always ensure this unit is firmly fixed to avoid vibration and slipping while operating as it may result in physical injury.
7 - Ceiling or wall installation : Please contact your local dealer before attempting any ceiling or wall installation. 8 - Ventilation : The cooling vents ensure a safe use of this product, and avoid any overheating risk. Do not obstruct or cover these vents as it may result in overheating and potential physical injury or product damage. This product should never been operated in a closed nonventilated area such as a flight case or a rack, unless cooling vents are provided for the purpose . 9 - Heat exposure : Sustained contact or proximity with warm surfaces may cause overheating and product damages. Please keep this product away from any heat source such as a heaters, amplifiers, hot plates, etc... 10 - Electric power supply : This product can only be operated according to a very specific voltage. These information are specified on the label located at the rear of the product. 11 - Power cords protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at lugs, convenience receptacles and the point where they exit from the fixture.
Page 4
12 - Cleaning precautions : Unplug the product before attempting any cleaning operation. This product should be cleaned only with accessories recommended by the manufacturer. Use a damp cloth to clean the surface. Do not wash this product. 13 - Long periods of non use : Disconnect the unit’s main power during long periods of non use. 14 - Liquids or objects penetration : Do not let any object penetrate this product as it may result in electric shock or fire. Never spill any liquid on this product as it may infiltrate the electronic components and result in electric shock or fire. 15 - This product should be serviced when : Please contact the qualified service personnel if : - The power cord or the plug has been damaged. - Objects have fallen or liquid has been spilled into the appliance. - The appliance has been exposed to rain or water. - The product does not appear to operate normally. - The product has been damaged. 16 - Inspection/maintenance : Please do not attempt any inspection or maintenance by yourself. Refer all servicing to qualified personnel. 17 - Operating environment : Ambient temperature and humidity: +5 - +35°C, relative humidity must be less than 85% (when cooling vents are not obstructed). Do not operate this product in a non-ventilated, very humid or warm place..
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
2 - Technical specifications • Optical - 5x15W quadricolor LEDs (50,000 hours) - Light output 5810 lux at 3 m - Beamwidth: 17° to 43° with the Frost filter - Removable Frost filter • Materials - Die-cast aluminium housing with black gloss finish - Safety glass - Tightness level : 65 (fully protected against dust and water projections) • Functions - Built-in command system with a drop-down menu to select the different modes : - Manual, Automatic, DMX (4, 6, 8 or 11 channels) - 8 Built-in programs accessible via the DMX - 10 user programs accessible via the menu - Wireless DMX transmitter / receiver 2.4 GHz included • Technical specifications - DMX inputs and outputs - Power cord with 4-pin IP connector - DMX IN/OUT cables with 3-pin IP connectors - Power supply : DC 22,2 - 26,2V - 70W with an optional external power unit - Dimensions : (L x W x H) : 370 x 178 x 110 mm - Weight : 6.8 kg • Optional accessories: - External power units : IPFLOOD-POW (10287) - Charging flight case for 6 IPFLOOD-5x15QC : FLYIPFLOOD-S1 (10264) - DMX wireless transmitter/Receiver: WDMX-ERIP (10301)
3 - Package contents The package must contain : -The moving head - A Frost filter -The user guide -A male XLR / DMX IP IN cable -A DMX IP / DMX IP OUT cable -A Quick-Lock fastening system -A safety cable
Page 5
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
4 - Description
1
1 - LEDs 2 - Display 3 - MENU/ESC button Enters/leaves menus. Allows you to browse through menus and change values. 4 - UP button : Allows you to browse through menus and change values. 5 - DOWN button : Allows you to browse through menus and change values. 6 - ENTER button: Selects functions and saves changes.
7 - LED battery charging indicator 8 - DMX signal indicator 9 - Power button 10 - Power input socket
2 3 4 5 6 7 8
This socket should ONLY be used with the optional IPFLOOD-POW power supply unit.
11 - DMX input 12 - DMX output 13 - Wireless DMX antenna 14 - Transport handle 15 - Charge connectors These connectors are used to charge the unit within the optional FLYIPFLOOD-S1 flightcase.
16 - Charge activation button
14
9 10 11 12
Page 6
17 - Decompression valve The internal pressure may vary depending on temperature fluctuations when the product is being used or inactive. This valve allows the air circulation while guaranteeing no liquid can come inside the projector.
16
15
13
This connector is hold down and activates the charging system when the IPFLOOD-5x15QC is within the optional FLYIPFLOOD-S1.
17
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
5 - Installing Quick-Lock fastening systems The IPFLOOD5x15QC can be ground operated or fixated on structures, in any kind of position. The following example illustrates how to install. 1 - Attach Omega holders or hook clamps to the Quick-Lock systems. 2 - Position your Omega - Quick-Lock systems on top of the drilled holes located below the IPFLOOD5x15QC. 3 - Rotate the Quick-Lock wing nuts a quarter turn and use a safety cable to secure the projector.
3
Note : The current legislation requires a double holding system for any device used in public places .This system must bear at least 10 times the weight of the device. This means the IPFLOOD5x15QC safety cable must be able to bear approximately 70 Kg.
Page 7
English
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
6 - DMX cabling and addressing 6.1 - DMX cabling Connecting the DMX remote control : Connect the female plug of your XLR cable to your DMX remote control XLR output, then connect your cable male output to the moving head. Daisy chain your moving heads with XLR cables. Using a DMX line termination : When long runs of cable are used (more than 100m, you may need to use a terminator on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which 1 is connected between pins 2 and 3 of a male XLR connector. This unit is inserted in the 3 female XLR connector of the last unit in your daisy chain to terminate the line. 2 R 120 Ω 1/4W
6.2 - Addressing the units
Every unit must have a DMX address in order to respond to DMX signals. The address corresponds to the channel number on which the unit receives an incoming DMX signal sent by the DMX remote control. The DMX addressing can be performed by programming the channel number via the display located on the base of the unit. You can either assign the same address to your units so they all react to the same signal, or assign a unique address per unit to control them independently. IPFLOOD5x15QC uses 4, 6, 8 or 11 channels. You must skip 4, 6, 8 or 11 channels betweeb each address you assign. In the following example, the projector is in 4-channel mode : The address of the first unit is 1, the second unit is5 (1+4), the third unit is 9 (5+4) and so on. Note : Once switched on, the projector automatically detects any incoming DMX signal and the display indicates the unit DMX address. If the unit does not receive any DMX signal, the display will flash. In such a case, please make sure the cable is properly plugged into the DMX input of your moving head, your remote control is switched on and the cables used are not defective.
Remote control Address 1
Page 8
DMX line termination Address 5
Address 9
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
6.2 - Using the wireless DMX system 1 - Using the wireless DMX system requires : 1 - A DMX controller 2 - A compatible wireless transmitter such as the Contest® WDMX-ERIP 3 - The IPFLOOD5x15QC projector equipped with the wireless DMX receiver 2 - The DMX signal indicator (page 6, number 8) 1 - Red/green rapid flashing : connecting to a DMX transmitter. 2 - Red/green slow flashing : connected to a wireless DMX transmitter but no DMX information is being received. 3 - Lit in green : Connected to a wireless DMX transmitter and receiving DMX information. 4 - Lit in red : Not connected to a wireless DMX transmitter. 3-
Menu
You will need to change a few parameters in this menu in order to switch from a wired DMX command system to a wireless DMX system.
(Wireless DMX mode activated) 1 - If the projector is switched on but not connected to a wireless DMX transmitter, it will automatically search either a wired or wireless DMX signal. In such a case, the projector can be controlled by a regular (wired) DMX controller or a wireless DMX transmitter. 2 - If the projector is switched off but connected to a wired DMX controller, it will still be able to connect to a wireless DMX transmitter but will only answer to wired DMX controllers once turned on. The wired connection overrides the wireless connection.
(Wireless DMX mode deactivated) When the wireless DMX mode is deactivated the unit cannot be connected to a wireless DMX transmitter.
(DMX signal management via XLR output) When this mode is activated, the incoming wireless DMX signal is directed toward the DMX XLR output. This allows you to add several other non-wirelesss projectors to the DMX network.
(Wireless DMX module reset) Allows you to reset the DMX address of your unit. 4 - Setting up a wireless DMX connection 1 - Connect the DMX controller to the wireless DMX transmitter. 2 - To create a connection to the wireless DMX transmitter : a - Make sure the DMX signal indicator is lit in red b - Press and hold the configuration button of the wireless transmitter for at least 3 seconds. The indicators of the projector and the wireless transmitter then start rapidly flashing in red and green, this is the standard peering procedure. c - Once connected, the projector will preserve its wireless DMX identity and will automatically reconnect each time it is switched on.
Page 9
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
5 - Cancelling the peering with a wireless DMX transmitter. 1 - For a single projector : a - Enter the menu and select : Personal >> WDMX >> ClrWDMX The DMX signal indicator then lits in red. 2 - For each projector connected to the wireless DMX transmitter : a - Press and hold the transmitter Function button b - The DMX signal indicators of all the projectors then lits in red.
7 - Dashboard The IPFLOOD5x15QC features many menus allowing you to configure its every move and function. Press MODE / ESC to access the main menu. Use the navigation keys to browse through submenus. Then press ENTER to access a submenu. Use the and navigation keys to change values. Press ENTER to save changes. Press MODE /ESC again to leave a submenu. Note : • Shaded values are the default values. 7.1
Menu This menu allows you to change the initial DMX address, visualise the channels DMX values and select an operating mode. Submenus
Values
Description Assigns a DMX address between 001 and 501. The moving head automatically activates the DMX mode once the DMX address has been configured. Allows you to visualise the DMX value of each channel. Allows you to determine how the projector will react when the slave mode is activated. When many devices are required, you can create several groups (1,2 or 3). Using the master/slave mode allows you to send different programs to each group. Once the Automatic mode is activated, the projector can operate by itself or as a Master unit.
Page 10
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector 7.2
English
Menu
This menu allows you to visualise the moving head running time, its temperature, and the current version of the internal software. Submenus Values Description Current running time since the unit was last switched on. Overall running time since the very first time the device was switched on. Running time since the last running time reset. Password allowing you to reset the Last Run Time. The password is: 038 Allows you to reset the Last Run Time. Temperature of the projector head (°C or Fahrenheit depending on the option chosen in the Personal >> Temp C/F menu). Battery charge level (%).
Current version of the internal software.
Page 11
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English 7.3
Menu This menu allows you to configure the projector reactions, adjust the ventilation, customise the display and reset all functions to factory settings. Submenus
Lower-level menus
Values
Description
Activates addressing via a DMX controller.
Configure the projector reactions in case of DMX signal interruptions : • Close Shutter : The projector blacks-out • Hold : The projector holds onto the last information received • Auto Program: The projector activates the Auto mode via built-in programs Timer after which the display shuts off when it remains inactive. This timer goes from 2 to 59 minutes. When OFF, the display will never shut off. Locks the keyboard when it remains inactive for more than 15 seconds. They keyboard can be unlocked by holding the menu button for more than 3 seconds.
Allows you to choose which unit of temperature will be displayed.
Configures the initial state of the projector : • ON : Once switched on, the projector will start with the last colour used via the ManCntrl menu before being switched off, if there is no DMX signal. If there is a DMX signal, the projector will react to it. • OFF : the projector will start with the last colour used. Configures the wireless receiving module : • WDMXOff : Deactivates the wireless DMX function • ActWDMX : Activates the wireless DMX function • AcDaOut :When this mode is activated, the incoming wireless DMX signal is directed toward the DMX XLR output. This allows you to add several other non-wirelesss projectors to the DMX network.
• ClrWDMX : Resets the wireless receiving module: use this function when you modified the DMX address and want to synchronised again the emitter with the receiver.
Resets to factory settings. This function can be unlocked with the following password : 011.
Page 12
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector 7.4
English
Menu Allows you to manually control each function. Submenus
Values
Description Red level settings from 000 - 255
Blue level settings from 000 - 255
And so on.
7.5
Menu Allows you to choose the number of DMX channels Submenus
Values
Description 4-channel mode: Red, Green, Blue and White 6-channel mode: Red, Green, Blue, White, Dimmer and Strobe 8-channel mode: Red, Green, Blue, White, Dimmer, Strobe, Colour macros and temperature adjustment 12-channel mode: Red, Green, Blue, White, Dimmer, Strobe, Colour macros and temperature adjustment, built-in programs, White balance authorisation and White balance
7.6
Menu Allows you to configure the Dimmer function. Submenus
Values
Description
Each mode has its own Dimmer rise and fall time. Please refer to paragraph 7.8 for more details about these different modes.
Page 13
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English 7.7
Menu This menu allows you to select the programs assigned to each of the 3 program groups, edit the 10 built-in programs and edit the 250 scenes forming these programs. The IPFLOOD-5x15QC can be assigned to 3 different slave groups (via the Slave mode function in the Function menu). The designated Master unit sends programs containing slave groups information. Programs are sent in a loop as follows:
Auto Prog Auto Prog Part 1 Part 2
Auto Prog Part 3
Auto Prog Auto Prog Part 1 Part 2
Auto Prog Part 3
Slave units receive every program but only reacts to those assigned to their group. A unit assigned to the Slave 2 group will only react to the Auto Pro Part 2 program. Submenus
Lower-level menus
Values
Description
Allows you to assign one of the 10 built-in programs to each Auto Pro Part X (1-3)
Allows you to select the scenes assigned to each program. Press ENTER to assign one of the available scenes to each step (SCXXSCXXX). A single scene can be assigned to different steps. Assign the =End scene to the last step of the program to set the end of the program. Use the Pro Test submenu to visualise the scenes assigned to the program you are currently editing. This submenu allows you to edit one of the 250 scenes. Select a scene and press ENTER. Sélect each function (R, G, B...etc) and press ENTER, then assign a value included between 000 and 255 to each function. Then indicate the scene duration (in seconds) and the fade out duration. The input By Out function allows you to receive a scene sent by a DMX controller. This submenu allows you to automatically record a scene sent by a DMX controller. You can store up to 250 scenes. Indicate the number of scenes you want to save, precising the opening and ending scenes. The opening scene selection uses the left and right arrow buttons. The ending scene selection uses the up and down arrow buttons. Press ENTER. The projector now awaits incoming scenes from the DMX controller.
Page 14
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
7.8 Dimmer modes
100%
50%
10% 0 0
From 0 to 255 with a 0 second fading time Dimmer modes
t (ms)
Fall time
Rise time
From 0 to 255 with a 1 second fading time
Rise time (in milliseconds)
Fall time (in milliseconds)
Rise time (in milliseconds)
Fall time (in milliseconds)
Standard
0
0
0
0
Scene
780
1100
1540
1660
Television
1180
1520
1660
1940
Architectural
1380
1730
2040
2120
Theatre
1580
1940
2230
2280
Page 15
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
8 - Modes and DMX values MODES 4 Ch
6 Ch
8 Ch
11 Ch
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
5
5
5
6
6
7
Page 16
6
7
Values
Functions
000 - 255 Red : From 0 - 100% 000 - 255 Green : From 0 - 100% 000 - 255 Blue : From 0 - 100% 000 - 255 White : From 0 - 100% Main dimmer or built-in programs speed 000 - 255 Intensity from 0 to 100% or speed from slow to fast Strobe 000 - 031 LEDs off 032 - 063 LEDs on 064 - 095 Slow to fast strobe effect 096 - 127 No function - LEDs on 128 - 159 Pulse effect 160 - 191 No function - LEDs on 192 - 223 Slow to fast random strobe effect 224 - 255 No function - LEDs on Colour macros 000 - 007 008 - 014 015 - 021 022 - 028 029 - 035 036 - 042 043 - 049 050 - 056 057 - 063 064 - 070 071 - 077 078 - 084 085 - 091 092 - 098 099 - 105 106 - 112 113 - 119 120 - 126 127 - 133 134 - 140 141 - 147 148 - 154 155 - 161 162 - 168 169 - 175 176 - 182 183 - 189
No function Colour macro 1 Colour macro 2 Colour macro 3 Colour macro 4 Colour macro 5 Colour macro 6 Colour macro 7 Colour macro 8 Colour macro 9 Colour macro 10 Colour macro 11 Colour macro 12 Colour macro 13 Colour macro 14 Colour macro 15 Colour macro 16 Colour macro 17 Colour macro 18 Colour macro 19 Colour macro 20 Colour macro 21 Colour macro 22 Colour macro 23 Colour macro 24 Colour macro 25 Colour macro 26
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
MODES Values 4 Ch
5 Ch
Functions
11 Ch 12 Ch
7
7
8
8
9
10
11
190 - 196 Colour macro 27 197 - 203 Colour macro 28 204 - 210 Colour macro 29 211 - 217 Colour macro 30 218 - 224 Colour macro 31 225 - 255 Colour macro 32 Colour temperature 000 - 007 No function 008 - 124 2700°K 125 - 255 7200°K Built-in programs 000 - 007 No function 008 - 038 Built-in program 1 039 - 062 Built-in program 2 063 - 093 Built-in program 3 094 - 124 Built-in program 4 125 - 155 Built-in program 5 156 - 186 Built-in program 6 187 - 217 Built-in program 7 218 - 255 Built-in program 8 White balance saving 000 - 007 No function 008 - 255 Activation of the white balance saving function White balance 000 - 007 No function 008 - 124 White balance editing 125 - 255 White balance saving
Page 17
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
10 - Photometric datas 2572
1140
637
Intensity (lux)(17°)
12960
5810
3253
Opening = 17°/43°
Intensity (lux)(43°)
17° 43°
Distance (m) Diameter (m) (17°) Diameter (m) (43°)
2
3
4
Ø 0,61 Ø 1,57
Ø 0,91 Ø 2,35
Ø 1,22 Ø 3,14
11 - Dimensions 263 177,4
82 186 246
288 101
290 87
180
Page 18
251
IPFLOOD5x15QC - 5x15W quadricolor LEDs battery operated wireless outdoor projector
English
12 - Notes
Page 19
Because CONTEST® takes the utmost care in its products to make sure you only get the best possible quality, our products are subjects to modifications without prior notice. That is why technical specifications and the products physical configuration might differ from the illustrations. Make sure you get the latest news and updates about the CONTEST® products on www.contest-lighting.com CONTEST® is a trademark of HITMUSIC S.A. - Zone Cahors sud - 46230 FONTANES - FRANCE
