Transcript
1
User Guide for TosBlue-X TosBlue-X can only connect with one receiving unit – for example one BHX headset from Telme2. Once you have installed the TosBlue-X unit – you are ready to use it for the first time. Do this: -
-
Set your Bluetooth receiver in pairing mode. Then turn your TV ON. Do it in this sequence. The two units should now pair. NOTE: Connecting the two units the next time – and the following times - do this: Turn ON your Bluetooth receiver – Not set it in pairing mode. Turn ON your TV with the TosBlue unit. Do it in this sequence. The two units should now interconnect.
Example: Pairing the BHX headset with the TosBlue-X for the first time -
Turn ON your TV with the TosBlue-X unit Press the ON/OFF/pairing button for several seconds on the BHX headset, until the LED flashes red and blue. Release the button and the two units will pair.
When paired, the TosBlue-X LED will be emitting a blue light fading slowly in and out indicating the unit is paired and ready to transmit sound. The LED in the headset will be flashing blue now and then – indicating the unit is paired and is receiving sound from TosBlue-X.
Example: Reconnecting the a BHX headset the next time – and following times
-
The next time you want to reconnect the BHX headset with the TosBlue-X unit, you simply turn the BHX headset ON. You do this by pushing the button for just a couple of seconds until only the blue light flashes - and the two units will reconnect automatically. NOTE: Do not set the headset in pairing mode this time.
