User Guide - Southern Telecom

Transcript

Included Location of controls 9.0” LCD Display Portable Digital Television PTV-900 In the box Location of controls 1. LCD screen 1. [MUTE] button 2. [Standby/Power] indicator 2. [PICTURE] button 3. Dual speakers 3. [MENU] button 4. [MENU] button 5. [CH-] button / scroll down 4. [SLEEP] button 1 Remote Control TV Stand Antenna 11 3 4 5 10. [SWITCH] button 6 7 8 9 10 button 16. Mini USB Jack 12 13 14 17. RF IN antenna jack User Guide 1 6 13. [EPG] program 19. Battery compartment 18 14. [ ] up button 15. [ ] right button 20 3 13 17. [ 14 18. [SWITCH] source button 15 19. [INFO] program 16 17 6 18 19 7 2 - (AAA) Batteries Mini USB to Female USB Cable User Guide 21 ] down button 22 23 information button 20. [CH+] channel up button 21. [CH-] channel down button 22. [ ---- ] channel program button 20 8 8 16. [ENTER] button 19 20 21 19 7 12 5 18 guide button 20. Removable stand holster 2 4 16 17 12. [EXIT] button 18. Antenna holster 15 5 mode button 15 16 17 21. TV kickstand (pull) 11 4 11. [ZOOM] display 15. Memory card slot 10 14 button 14. Headphone jack 9 13 3 10. [MTS] sound field 13. Power [ON/OFF] switch DC Car Charger 12 9. [POWER] button 12. DC 5V IN jack Headphones 2 8. [VOL-] volume down 11. Remote control sensor AC Adaptor 11 ] previous channel 7. [ button 9. [VOL+] button / scroll right 10 1 6. Numeric buttons 7. [AUTO/OK] confirm button 2 Digital TV 9 ] left button 5. [ 6. [CH+] button / scroll up 8. [VOL-] button / scroll left Remote control 23. [VOL+] volume up button 21 22 Included 23 Getting started Installing the batteries 2. Charging time depends on whether the TV is ON during charging or in standby mode. 1. Open the battery cover. • If the TV is ON – the charge time is approximately 7 hours. 2. Place the 2 (AAA) batteries (included) into the compartment. Be sure the positive and negative terminals are positioned correctly as shown. Polaroid and Polaroid & Pixel are trademarks of PLR IP Holdings, LLC, used under license. PLR IP Holdings, LLC does not manufacture this product or provide any Manufacturer’s Warranty or support. www.polaroid.com 3. Close the battery cover. Cover Remote control Batteries • If the TV is in standby mode – the charge time is approximately 5 hours. 3. When the battery strength is low, the TV will display the following icon on the screen: ,this means it is time to recharge the battery. 4. The [Standby/Power] indicator light on the front of the TV turns solid red when the power cord is connected and the the power switch is in the off position. 5. The [Standby/Power] indicator light on the front of the TV blinks red when the the battery is charging. Connecting the antenna Attaching a USB device This TV has Mini USB jack which allows you to attach a USB device so you can view music, videos, and pictures. Most USB devices come with a Mini USB to USB cable to connect to a computer. To attach your USB device to the TV: 1. Insert the large USB tip of your devices cable into the large USB tip of the supplied cable. 2. Attach either Mini USB tip to the TV’s Mini USB jack. 3. Attach the other Mini USB tip to your device’s Mini USB Jack. 4. The TV can no read your device (see Slideshow, Music, Videos, and / or Browse). 1. With the antenna in the down position, screw it into the RF IN antenna jack on the TV. 2. For the best reception, stretch the antenna out to its fullest length before scanning for channels and when watching television. 3. When traveling or not watching TV, you can unscrew the antenna from the RF IN jack and store it on the back of the TV in the antenna holster. Charging (Mini USB to USB Female) PTV900 This TV contains a built-in rechargeable battery. You may charge the TV while it is turned off by using the included AC adaptor or the included car charger. You may watch TV and charge it with either charger as long as the TV is not moving. (USB Male to Mini USB) 1. Connect the AC adaptor to the DC 5V IN jack on the TV and plug it into a wall receptacle OR connect the car charger to the DC 5V IN jack on the TV and plug it into your car’s cigarette lighter. Note: Use the included car charger to charge the TV in a car or boat. Navigating the menus Note: The antenna must be connected during channel scanning to receive the highestamount of channels available . Scanning for channels While in menus or submenus, use the following buttons to navigate: Main menu navigation TV navigation buttons: When the TV is first turned ON, the main menu appears. To get to the main menu at any time, press the [SWITCH] button (repeatedly if necessary). 1. [CH-] button – move the selection down 2. [CH+] button – move the selection up USB DEVICE 6 1 2 5 3 1. Use the left or right navigation buttons to select from the following main menu options then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your selection: 4 3. [VOL-] button – move the selection left The first time the television is turned on you must scan for available channels. You should also scan for available channels whenever you are in a new area, or when reception is weak. 1. Make sure that the antenna is connected to the TV and slide the power [ON/OFF] switch to the ON position. 2. Press the [VOL+ or VOL-] button on the TV to select DTV from the main menu. When you select DTV for the first time the following screen will be displayed: DTV – watch digital television Setup Wizard Slideshow – watch a slideshow of pictures with music (optional) 4. [VOL+] button – move the selection right Select the antenna type then auto scan: FM radio – listen to FM radio 1 5. [AUTO/OK ] button – confirm the selection Air/Cable Music – listen to music files Video – watch video files 6. [MENU] button – return to previous menu Browse – browse all files Remote control navigation buttons: Settings – change the TV settings 1. [ ] button – move the selection up 2. Press the [SWITCH] button to switch between the main menu, DTV or FM radio modes at any time. 4 3 Cable System: Go to next step: 3. [ ] button – move the selection left 4. [ ] – move the selection right Note: If there is no memory card in the TV or USB device attached to the TV then the Slideshow, Music, Video or Browse functions will not work. 2 Basic Operation MENU RF CH : 62 Found : 36 Note: ATSC Digital tuners are not capable of receiving a signal while in motion. Do not use this TV in a moving vehicle. Air 2.1 WCBS-HD Normal ENTER 4. Press the [ ] button to scroll to “Auto Scan” and press the [ ] button twice. The TV will start scanning for available channels and store them into memory. 1. Disconnect the antenna from the TV and attach the coaxial cable antenna to the RF-IN antenna jack. 5 5. [ENTER] button – confirm the selection 3. Press the [ ] button to select “Air” or “Cable”, depending on the type of connection. 4. If necessary, press the [VOL+] button on the TV to change the “Air/Cable” option to “Air”. Setup Wizard Air/Cable Auto Scan Show/Hide Channel No. Channel Label DTV Signal 2. Press the [ ] button to scroll to “Air/Cable”. To watch cable TV 5. Press the [CH+ or CH-] button on the TV to scroll to “Go to next step” then press the [AUTO/OK] button to start scanning for channels. The TV will store all local channels into memory. Channel 1. While in DTV mode, press the [MENU] button on the remote then press the [ ] button to bring up the “Channel” menu. 3. If this screen does not appear, then press the [AUTO/OK] button on the TV. 2. [ ] button – move the selection down 6. [MENU] button – return to previous menu Air Scanning by remote control 2. Press the [AUTO/OK] button on the TV. 3. Press the left or right navigation button to change the “Air/Cable” option to Cable. 4. Use the up or down navigation button to scroll to “Go to next step” and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. The TV will start scanning for available cable channels and store them into memory. Note: Do not move or unplug the TV while scanning for channels / subchannels as this will interrupt the scanning process and you will not receive all possible channels/subchannels. Settings DTV - Adjusting the volume DTV - Channel selection Changing the DTV settings Information Guide The volume can be adjusted from 0-100. To adjust the volume while watching TV: Note: This TV’s receiver can store up to 69 channels and each channel can store up to 8 subchannels. You can change the settings on the TV by entering the different settings menus and using the following procedure to navigate them: 1. Press the [VOL+] button on the TV or the remote to raise the volume. 1. Press the [CH+] button to play the next channel/subchannel. 1. Make sure you are in DTV mode and press the [MENU] button. You can access the information guide to display current, past and future programming information. Program information and/or availability may vary by area depending on local service providers. 2. Press the [VOL-] button on the TV or the remote to lower the volume. 2. Press the [CH-] button to play the previous channel/subchannel. 2. Use the left or right navigation buttons to scroll to the TV settings menu you would like to access. 3. Press the [MUTE] button on the remote to mute the TV sound. Press the [MUTE] button again to restore sound. 3. To select a specific channel using the remote, use the numeric keypad. 3. Use the up or down navigation buttons to scroll up or down on the menus to select the settings you would like to change. DTV - Choosing picture mode 1. Press the [PICTURE] button on the remote to enter the picture mode options. 2. Keep pressing the [PICTURE] button to choose between the following picture modes: Standard, Dynamic, Soft or Personal. DTV - Choosing picture size 4. Use the left or right navigation buttons to change the desired settings. Note: If the channel has more than one subchannel associated with it (for example channel 16.4), press the [1] button then press the [6] button then press the [ ---- ] button then press the [4] button. 2. Keep pressing the [ZOOM] button to choose between NORMAL and WIDE zoom modes. 4. Press the [ ] button on the remote to return to the last channel viewed. 1. Press the [SLEEP] button on the remote to enter the sleep timer mode options. 2. Keep pressing the [SLEEP] button to choose between the following sleep timer options: OFF / 5 / 10 / 15 / 30 / 45 / 60 / 90 / 120 /180 / 240 minutes Normal Wide 6. Keep pressing the [MENU] button or press the [EXIT] button to close the settings menu and return to TV viewing. Current channel 3. The TV will go into standby mode after the chosen time allotment. Choose “OFF” to disable the sleep timer and return to normal viewing. Picture / Audio / Time & Date / Setup / Channel The TV will remember the settings until they are changed, even if the player is set to standby mode. To restore the settings to factory default, scroll to the Setup menu, then scroll down to “Restore Default”, then scroll right to open the option menu, then select “Yes”, then confirm. Main menu settings 1. Press the [SWITCH] button on the TV or the remote to enter the main menu. If the main menu does not appear then keep pressing the [SWITCH] button until you see the main menu. 2. Use the left or right navigation buttons to scroll to “Settings” then press the [AUTO/OK] button the TV or the [ENTER] button on the remote to confirm your choice. 3. Use the up or down navigation buttons to scroll to the desired submenu, then press the [AUTO/OK] button on the TV or the [ ENTER] button on the remote to enter the desired submenu options menu. 4. Use the up or down navigation buttons scroll to the desired submenu option, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 5. When in submenus, press the [MENU] button at any time to return to the previous menu. Keep pressing [MENU] to return to the main menu. Resolution 2.1 WCBS-HD CC CC Off CC 1920x1080 Audio mode Audio 1/2 (L | R) Program name Channel type Let’s Make a Deal FTA TV-PG 06:00AM - 07:00AM Good Monday, 26 July - 2010 06:55 PM Signal strength Program time Date & Time There are 5 different DTV settings menus: DTV - Sleep timer 1. Press the [ZOOM] button on the remote to enter the zoom mode options. 5. Press the [MENU] button to confirm the new settings and return to the menu options. 1. Press the [INFO] button on the remote to bring up the current program’s information: 2. Press the [EPG] button on the remote to bring up the Electronic Program Guide to view information on past, current or future programs of the selected channel / subchannel. EPG Current date and time Program time and name 9.2 WWOR-TV My Name Is Earl DTV Monday, 26 July - 2010 06:55 PM 04:00AM-04:30AM Monday, 26 2010 04:00 PM My Name is Earl CC 05:00 PM Half & Half TV RATING TV-14 CC A series of devastating torandoes rips 06:00 PM The 700 Club CC through Camden County, causing Earl 07:00 PM The People’s Court CC to lose his list, a wild boat ride leads 08:00 PM Judge Alex CC Randy to believe he is invincible,Mike 09:00 PM Ren & Stimpy Show CC and Darnell argue over which of them 10:00 PM Family Feud CC is smart one in their relationship. 11:00 PM Family Feud CC 9.1 Previous available channel Current Channel Current program Current time slot TV Rating Program description 11.1 Next available channel 3. Press the up or down navigation buttons to scroll through past or future program information. 4. Press the left or right navigation buttons to scroll through different channel information. Slideshow Music You can use the TV as a slideshow picture frame with music playing (optional). You must have a memory card inserted and / or a USB device attached, with picture and music files (optional), for the slideshow function to work. 7. During slideshow playback, press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to enter the slideshow submenu: 1 • Supported picture file types are JPEG, GIF and BMP. 2 3 4 5 6 7 8 You can use the TV as a music player. You must have a memory card inserted and / or a USB device attached, with music files, for the music function to work. • Supported music file types are MP3 and WMA. • Supported memory card types are SD, MMC and MS. • Supported music file types are MP3 and WMA. • Supported memory card types are SD, MMC and MS. 2. If necessary, press the [SWITCH] button repeatedly until the main menu appears. 3. Use the left or right navigation buttons to scroll to “Music” then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. Lock 8. Use the left or right navigation buttons to select your choice then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 2. If necessary, press the [SWITCH] button repeatedly until the main menu appears. 3. Use the left or right navigation buttons to scroll to “Slideshow”, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. Your picture files will be shown on the screen. 9 .Press the [MENU] button to exit then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to resume slideshow playback. 10.To exit “Slideshow”, press the [MENU] button repeatedly until you see the quickmenu then select “Exit” OR press the [SWITCH] button repeatedly until the main menu appears. 4. Use the navigation buttons to select a starting point for the slideshow and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 5. Press the up or down navigation buttons to switch between different playback effect modes. 6. Press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to start the slideshow playback. If there is music on the memory card, it will play in the background. Exit Picture Information 1 3 4 5 6 7 8 9 4. Use the up and down navigation buttons to select the storage device you you would like to open (SD/MMC or USB), then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 5. Use the navigation buttons to scroll to the song you would like to play or folder you would like to open and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 6. If you select a folder to open, then repeat number 5. 1. Play or pause the music 2. Stop playing music and return to play list 3. Play the previous track 4. Play the next track 5. Rewind ten seconds 6. Fast forward ten seconds 7. Adjust the volume (select then use the [VOL+ or VOL-] buttons) 8. Music track information 9. Switch playback mode 8. To stop playback and return to the music menu, press the [MENU] button. Keep pressing the [MENU] button to return to previous menus. 9. To exit “Music” and return to the main menu, press the [MENU] or [SWITCH] button repeatedly until the main menu appears. Switch storage device Note: If you have both a memory card and a USB device attached to the TV, the slideshow will read all of the files that are not placed in folders from both devices. If you would like to play files from only one device, press the [MENU] button, then scroll to “switch storage device”, then select which storage device you would like to view from. Note: To play music stored in a folder on your memory card, you must first open that folder, then select a song within that folder and the TV will play all of the music in that folder. If a song is selected that is not in a folder, the TV will play all songs that are not in a folder. Note: To adjust the volume in Music or Video mode, you must select the “Adjust Volume” option from the main menu and use the left or right navigation buttons to raise or lower the volume. FM Radio Videos You can use the TV as a video player. You must have a memory card inserted and / or a USB device attached, with video files, for the video function to work. • Supported video file types are MPEG, AVI, and DAT • Supported memory card types are SD, MMC and MS. 7. During video playback options, use the navigation buttons to choose from the video playback options then press the [AUTO/OK] button the TV or the [ENTER] button on the remote to confirm your choice. 1 2 3 4 5 6 7 8 9 10 11 12 1. Insert a memory card into the card reader slot and / or attach a USB device to the mini USB jack on the TV. 2. If necessary, press the [SWITCH] button repeatedly until the main menu appears. 3. Press the left or right navigation buttons to scroll to “Video”, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 4. Use the up and down navigation buttons to select the storage device you you would like to open (SD/MMC or USB), then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 1. Play or pause the current video 2. Stop the current video 3. Skip to previous video 4. Skip to next video 5. Rewind ten seconds 6. Fast forward ten seconds 7. Adjust the volume (select then use the [VOL+ or VOL-] buttons) 8. Adjust the brightness 9. Switch playback mode 10. Change subtitle language (if applicable) 11. Audio mode 12. Full screen mode You can use the TV as a FM Radio. You must have headphones plugged into the TV for the FM Radio function to work. 2. If necessary press the [SWITCH] button repeatedly until “FM Radio” appears. 2. Use the up and down navigation buttons to select a slot in the “Favorite Channels” list. 3. Use the left or right navigation buttons to scroll to “FM Radio”, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 3. Use the left and right navigation buttons to select the “Save the current station” icon, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 4. Use the left and right navigation buttons to select an option from the FM Radio menu, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice from the following options: 4. The station will be saved into the chosen slot on the “Favorite Channels” list in the left window. To scan for all available channels and store them in the scan list located in the right window: Favorite Channels CD1 --[88.90]-- left window 101.50MHZ CD2 --[92.30]-- right window CD3 --[94.80]-CD4 --[102.50]-- 3. Use the up and down navigation buttons to scroll through the saved stations then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your station selection. You may select multiple stations to save. CD6 --[107.90]-- 9. To exit “Video” and return to the main menu, press the [MENU] or [SWITCH] button repeatedly until the main menu appears. Note: To play videos stored in a folder on your memory card or USB device, you must first open that folder, then select a video within that folder and the TV will play all of the videos in that folder. If a video is selected that is not in a folder, the TV will play all videos that are not stored in folders. 1. Use the left and right navigation buttons to select the “Scan and save” icon, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 2. Wait for the TV to finish scanning for channels. When finished scanning, the saved stations will be stored in the window on the right. CD5 --[105.90]-- 8. To stop playback and return to the video menu, press the [MENU] button. Keep pressing the [MENU] button to return to previous menus. 6. If you selected a folder to open, then repeat number 5. To store stations individually in the “Favorite Channels” list: 1. Find a radio station you would like to save. 1. Insert headphones into the headphone jack on the TV. 5. Use the navigation buttons to scroll to the video you would like to play or folder you would like to open and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 1 2 3 4 5 6 7 8 1. Skip backward to the next available radio station 2. Manual search backward on the radio frequency dial 3. Manual search forward on the radio frequency dial 4. Skip forward to the next available radio station 5. Adjust the volume (select then use the [VOL+ or VOL-] buttons) 6. Save the current station to the “Favorite Channels” list. 7. Scan and save all available stations (the available stations will be listed in the right window where you can use the navigation buttons to select a station) 8. Switch between headphones and TV speakers Browsing files 4. With a scanned station(s) selected, press the left navigation button to save that scanned station(s) to the “Favorite Channels” list (the left window). 5. To exit the scanning window and return to normal listening mode, press the right navigation button at any time. 6. To exit “FM Radio” and return to the main menu, press the [MENU] or [SWITCH] button repeatedly until the main menu appears. Troubleshooting You can use the TV to browse files on your memory card or USB device where you can view, listen to, or watch files stored on them. 1. Insert a memory card into the card reader slot and / or attach a USB device to the mini USB jack on the TV. 2. If necessary, press the [SWITCH] button repeatedly until the main menu appears. 3. Use the left or right navigation buttons to scroll to “Browse”, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. All files and folders will be displayed. 4. The browser will only read one storage device at a time. To switch between the memory card and the USB device, select “Switch storage device” from the browse menu, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. To browse picture files 3. To set a picture as the TV startup screen: To browse video files A. Select a picture and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to open the picture browser menu. 2. Press the the [AUTO/OK] button on the TV or the [ENTER] button on the remote to open the picture’s browse menu: Exit to previous menu Switch storage device Set picture to startup screen The TV will ask you to confirm setting the chosen picture as a logo. Play/pause Play/pause Play/pause Play/pause Play/pause C. Use the navigation buttons to choose Yes or No and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm. To browse music files 1. Use the navigation buttons to select a music file and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. The music browse menu will appear: 2. Use the left or right navigation buttons to select play / pause, and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice and start playing the selected video. 3. To stop playing the selected music track and return to the playlist, use the left or right navigation buttons to select Stop, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. 4. Press the [MENU] button to return to the previous menu. Play/pause Stop Adjust volume 5. To exit “Browse” and return to the main menu, press the [MENU] or [SWITCH] button repeatedly until the main menu appears. 2. Use the left or right navigation buttons to select play / pause, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to start playing the selected music track. 3. Press the [MENU] button to return to the previous menu. 4. Press the [MENU] button to return to the previous menu. 4. To exit to the main menu, press the [MENU] button again and select the Exit icon, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. . To exit “Browse” and return to the main menu, press the [MENU] button repeatedly until the main menu appears or press the [SWITCH] button repeatedly until the main menu appears. Safety precautions TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ● Re-orient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT. Do not attempt to repair or modify this equipment. Warning: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. PLR IP Holdings, LLC, its licensees and affiliates, fully supports all electronic waste initiatives. As responsible stewards of the environment, and to avoid violating established laws, you should properly dispose of this product in compliance with all applicable regulations, directives or other governances in the area where you reside. Please check with local authorities or the retailer where you purchased this product to determine a location where you can appropriately dispose of the product. The TV reception signal might be weak. Try scanning for channels again or move the TV to a different location and scan for channels. Check that the volume is turned up and the mute function is not on and that headphones are not plugged into the TV. Also, the signal might be weak, try moving the TV to a new location and scanning for channels again. Poor reception Try adjusting the antenna or scanning for channels again. Dark or blurred picture Try adjusting the brightness and contrast in the picture settings menu, also check that the battery is charged enough. If the TV is not plugged in, use one of the included adaptors to power the TV. Unclear or unstable picture Try adjusting the antenna or scanning for channels again. Snow in picture Most likely a power interference issue such as radio frequency, power lines, etc. is interfering with the reception. Try adjusting the antenna or moving the TV to a different location and scanning for channels again. Legal information FCC Part 15: This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: No picture No sound 3. To stop playing the selected music track and return to the playlist, use the left or right navigation buttons to select Stop, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. Picture information WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1. Use the navigation buttons to select a video file and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. The video browse menu will appear: B. Use the left or right navigation buttons to select “Set picture to startup screen”, then press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm. 1. Use the navigation buttons to select a picture file and press the [AUTO/OK] button on the TV or the [ENTER] button on the remote to confirm your choice. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 2 1. Insert a memory card into the card reader slot and / or attach a USB device to the mini USB jack on the TV. 1. Skip to the previous picture 2. Skip to the next picture 3. Rotate current picture 90 degrees 4. Resume play of the slideshow 5. Adjust the volume (select then use the [VOL+ or VOL-] buttons) 6. Adjust the brightness 7. Picture information 8. Zoom the current picture 1. Insert a memory card into the card reader slot and / or attach a USB device to the mini USB jack on the TV. 7. During music playback, use the left or right navigation buttons to choose from the music playback options then press the [AUTO/OK] button the TV or the [ENTER] button on the remote to confirm your choice: Limited Warranty You may also go to HYPERLINK "http://www.polaroid.com" www.polaroid.com and reference About / Electronic Recycling to learn more about the specific laws in your area and to locate a collection facility near your home. If your electronic device has internal memory on which personal or other confidential data may be stored, you may want to perform a data sanitization process before you dispose of your device to assure another party cannot access your personal data. Data sanitization varies by the type of product and its software, and you may want to research the best sanitization process for your device before disposal. You may also check with your local recycling facility to determine their data sanitization procedures during the recycling process. This Product is supplied and distributed new by AIT, Inc. (“AIT”) to the original consumer purchaser and is warranted by AIT against defects in material and workmanship for a period of one year from your date of purchase (“Warranty”). In the unlikely event that this product is defective, or does not perform properly, you may within one year from your original date of purchase return it to the authorized service center for repair or exchange. TO OBTAIN WARRANTY SERVICE: - Provide proof of the date of purchase within the package (Dated bill of sale) - Prepay all shipping costs to the authorized service center, and remember to insure your return. - Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package. - Describe the defect or reason you are returning the product. Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping, will require you to file a claim with the carrier. The shipping address of the authorized service center is: AIT, Inc. ATTN: Returns Department 14-C 53rd Street Brooklyn, NY 11232 IN NO EVENT WILL AIT, ITS MANUFACTURERS, DISTRIBUTORS OR PLR IP HOLDINGS, LLC BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) RELATED TO THIS PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY. Should you have any questions or problems concerning this product, please contact our customer service department at: Customer Support:  1-877-768-8483 (Toll Free)  [email protected] Monday - Thursday: 9AM - 5PM (EST) Friday: 9AM - 3PM (EST)