Transcript
User Manual Model: BlueFit JAZZ 6 Welcome you using for this bluetooth headset , it USES bluetooth 4.1 echo elimination technology, provide superior sound quality, and easy hands-free operation. Before using this product, please read this manual in detail.
Function
Operation
Power On
Long press the multifunction button for 3 seconds
Power off
Long press the multifunction key for 3.5 seconds
In pairing mode
Long press the multifunction key for 6.5 seconds
Answering call
Short press the multifunction button again
End call
Short press the multifunction button again
Reject
Long press the multifunction button for 1 second
At the end of the number redial
Double the multifunction button
Cancel/End
Short press the multifunction button again
Voice dial
Long press the multifunction button for 1 second
Transfer Audio
Long press the multifunction button for 1 second
Toggle Mute
Double multifunction button
Pause, play
Short press the multifunction button
vol- vol+（BACK/FDW)
Short press vol- vol+（BACK/FDW）
The micro USB charging port 1. to 2 hours(charge) 2. After a full charge to see which has the best performance Volume button 1. The volume increase/decreaseEach （press 1 time，Level of the volume change will happen） LED 1. Is in charge（ Long red light bright；After a full charge，Blue light is long on） 2. Battery power is insufficient （ The red light flashing 2 times。 And a voice prompt） Cell phone bluetooth headset connected steps 1. In the headset turned off state ， Long press the multifunction button （About 6 seconds），Until the headset indicator appears red and blue flashing state，Enter the search condition。（Must be set to the Chinese hints，For matching state， Can be search to other bluetooth device） 2. Open the bluetooth mobile phone,Click on the search for bluetooth devices,Until the signal of mobile search to the headset,Displays the headphones models. 3. Click on the headset model to connect,After the connection is successful,Headphones will display lights for the blue lights flashing. 4. password: 0000 (0000) initial passwords are Here,Congratulations to you,The connection is successful,Can now listening to music, voice. Mobile multi-function connection steps 1. Bluetooth headset turned off,Long press the multifunctional key for about 6 seconds,Until the headset indicator appears red and blue lights flashing,Enter the search state. 2. Open bluetooth mobile phone 1,Search looking for headphone bluetooth device name,Point pairs to complete the connection. 3. Long press the headset multi-function key,Until the red light,Closed headphones,And mobile phones bluetooth # 1. 4. Is once again open the bluetooth headset into the search state. 5. open the mobile phone The bluetooth function， Search looking for headphone bluetooth device name,Point pairs to complete the connection. 6. Open mobile phone 1 bluetooth function and find the headphone connection before,Click on the link to complete more。 Keep around in your mobile phone use. Between your phone and headset bluetooth work straight without blocking "scope" of up to 10 meters,Beyond this distance,It could sound quality decline and lose connection. Learn how to reconnect the: 1. Your ear to try to reconnect the lost connection. 2. If the headphones did not attempt to reconnect,Lightly press the multifunction button once or through the mobile phone's bluetooth menu to manually reconnect. Restore factory Settings: Hold the multifunction button 3 seconds when charging,Till the red and blue lights flashing three times,You can restore factory Settings. Common problems and solutions Mobile phone can't search the bluetooth headset Possible reasons: 1. The bluetooth headset is not switched on to search 2. Bluetooth headset application error 3. The mobile phone bluetooth application error The solution: 1. The bluetooth headset turned off,Long press the multifunction button (that is, the red and blue lights flashing alternately) to activate the bluetooth pairing 2. Bluetooth headset will restore factory Settings 3. Mobile phone after the restart all store phone bluetooth pairing data cleanup Note: 1. The bluetooth headset in pairing mode after,To connect in 3 minutes,Ear opportunity automatically turned off after 3 minutes. 2. Hold the multifunction button for about 3 seconds when charging,Till the red and blue lights flashing three times can restore factory Settings.
Headphone no sound Possible reasons: 1. The mobile phone volume is not appropriate 2. The bluetooth headset and mobile phone is not connected properly 3. The bluetooth headset does not work in the limited scope The solution: 1. In the mobile phone 2. Reference to use the steps again 3. Keep the earphones used in mobile phone 10 meters,Without any obstructions. Note: 1. Search the bluetooth when other operations do not,Prevent application error. 2. Keep around mobile phone use in order to ensure the best results. Charging the red light is not bright Possible reasons: ong time no use The solution: About 30 minutes, must charge the red light will be bright Note: Overcharge the bluetooth headset, in a closed car such similar environment, reduces the capacity and service life of the battery
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
