Transcript
USER MANUAL
VX Series Guitar Cabinets
The VX series cabinets are designed to let the passion and detail of your music be heard. The Baltic Birch is sought after by top musicians for it’s pure sound and roadworthiness. The VX goes further, using dado joint construction and socketed internal bracing with steel corners and handles. Thick sides and premium grill cloth give you the stage presence to match your sound. Choose different tunings by removing the back panels and open undiscovered tonal possibilities.
VX212S VX412T VX412B
VX112
VX212 Removable back panels for open, closed or ported responses Internal bracing on 212, 412
custom coverings
VX212S on VX212
16262 WEST BERNARDO DR. SAN DIEGO, CA 92127 800-854-2235 CARVINAUDIO.COM
REAR CONNECTION PLATE
REMOVABLE BACK PANELS
(no switch on VX112)
Speaker response can be changed by removing the rear panels for the option of sealed or ported/open-back operation. 412 and 212 models feature two openings for more variation.
Remove the rubber plug to access the Mono/Stereo switch Replace the plug when finished Note: You will need to change the impedance switch on tube amps. (no switch on VX112)
To remove panels, unscrew the six screws. Store the screws in the threaded holes.
SPECIFICATIONS VX112 Configuration: Frequency Response:
One 12” speaker tilt-back or flat side orientation 76 Hz – 5.5 kHz (with back closed)
Power Handling: Carvin GT12 speaker 100W (standard) Celestion™ Vintage30™ 60W (optional)
VX212, VX212S Configuration: VX212 VX212S
Two 12” speakers horizontal or vertical orientation vertical, slant top
VX412T, VX412B Configuration: VX412T VX412B
Four 12” speakers slant top square (bottom)
Frequency Response:
72 Hz – 5.5 kHz (with backs closed)
Frequency Response:
68 Hz – 5.5 kHz (with backs closed)
Power Handling: Carvin GT12 speaker 200W mono, 100W/100W stereo (std.) Celestion™ Vintage30™ 120W mono, 60W/60W stereo (opt.)
Power Handling: Carvin GT12 speaker 400W mono, 200W/200W stereo (std.) Celestion™ Vintage30™ 240W mono, 120W/120W stereo (opt.)
Impedance:
16 Ohms mono, 8 Ohms stereo
Impedance:
16 Ohms mono, 8 Ohms stereo
Enclosure:
Premium Russian Baltic Birch, 2 Removable back panels
Enclosure:
Premium Russian Baltic Birch, 2 Removable back panels
Impedance:
16 Ohms
Enclosure:
Premium Russian Baltic Birch, Removable back panel Removable top amp stop for tilt-back
Finish:
Black Vinyl standard, optional colors and textures
Finish:
Black Vinyl standard, optional colors and textures
Finish:
Black Vinyl standard, optional colors and textures
Transport:
2 Recessed Steel Handles
Transport:
2 Recessed Steel Handles
Transport:
Grill:
Acoustically Transparent Grillcloth removable for speaker access rotates 90 degrees for tilt or flat
Grill:
Acoustically Transparent Grillcloth removable for speaker access
2 Recessed Steel Handles, caster sockets fit CTS4
Grill:
Connections:
Two 1/4” connectors, mono
Connections:
Two 1/4” connectors mono/stereo switch
Acoustically Transparent Grillcloth removable for speaker access
Connections:
Two 1/4” connectors mono/stereo switch
Dimensions (H x W x D): 18” x 17.5” x 12.25” 458 x 445 x 321mm Net Wt:
32.2 lb (14.6 kg)
Accessories
CVVX112 cover
Dimensions (H x W x D): 30.75” x 17.5” x 12.25” (S-top=9.25”) 781 x 445 x 321mm (S-top=235mm) Net Wt: VX212 54 lb (24.6 kg) VX212S 51.8 lb (23.6 kg) Accessories
CVVX212 cover for VX212 CVVX212S for VX212S
Dimensions (H x W x D): 30.75” x 30.25” x 14”(S-top=11”) 781 x 769 x 356mm (S-top=280mm) Net Wt: VX412T 89 lb (40.5 kg) VX412B 92 lb (41.8 kg) Accessories
CVVX412T or CVVX412B covers CTS4 caster set (4)
LIMITED WARRANTY Your Carvin loudspeaker is guaranteed against failure due to manufacturing defects for 5 YEARS unless otherwise stated. Carvin will service and supply all parts at no charge to the customer providing the unit is under warranty. Shipping costs are the responsibility of the customer. CARVIN DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for equipment damaged by this unit. This warranty does not cover, and no liability is assumed, for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incorrect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed or implied. No representative or person is authorized to represent or assume for Carvin any liability in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. MAINTAINING YOUR EQUIPMENT The panel of your unit can be wiped with a dry or slightly damp cloth in order to remove dust and bring back the new look. Avoid spilling liquids or allowing any other foreign matter inside the unit. As with all pro gear, avoid prolonged use in caustic environments (salt air). When used in such an environment, be sure the equipment is adequately protected. SERVICE: In the USA: email:
[email protected], or visit our website: www.carvinaudio.com and under “SUPPORT” click on “REPAIR INFORMATION” Outside the USA: contact your dealer, or go to http://www.carvinaudio.com click on “DEALERS” for your nearest service center. Include a written description of the problem with serial number and date of purchase. 76-01412C 122716
