Transcript
Touchpad Mode Gestures
User Manual Thank you for purchasing our product. Please read this manual carefully before using the product and follow the safety guidelines. Safety Guidelines ・ Do not drop, hit or apply excess pressure to the product. ・ Please do not attempt to personally repair or dismantle the product. ・ Please follow your country s electronic waste disposal regulations or laws when you dispose of this product. ・ If there is something wrong with this product please discontinue use and contact the support center (
[email protected]). Supported Operating Systems
・Windows 8 ・Mac OS X
＜for Windows ＞
・1 Finger
・2 Fingers
・2 Finger Pinch
・3 Fingers
・4 Fingers
・5 Fingers
・1 Finger
・2 Fingers
・2 Finger Pinch
・3 Fingers
・4 Fingers
・5 Fingers
Track : Mouse pointer Tap : Left click
Tap : Select area
Accessories
・USB to micro USB cable : 1pc ・Cleaning cloth : 1pc
Tap : Right click Top ↔ Bottom Slide : Screen scroll Left ↔ Right Slide : Screen/Document scroll
Left ↔ Right Slide : Switch task menu Slide to Top : Zoom in on current task Slide to Bottom : Zoom out on current task (Windows 8.0 or newer)
Pinch Out : Zoom in Pinch In : Zoom out
Pinch In : Show desktop
＜for Mac OS X＞
Startup Guide
1. How to connect
Connect the smaller micro USB plug to the keyboard then connect the larger standard USB plug to the computer. When the keyboard is successfully connected to the computer, driver installation will begin automatically.
Track : Mouse pointer Tap : Left click
2.Changing the keyboard settings for each OS Settings for Windows 8 : Fn key + [ Settings for Mac OS X : Fn key + [ 3.Switching modes Press [ Press [
]
]
] to change to keyboard mode, press [ ] to enter sleep mode.
The LED backlight will automatically turn off after not using the keyboard for 5 consecutive minutes, it will turn back on again when touched.
Tap : Search
Switch on/off the backlight by touching the keyboard with 10 fingers. ] +[
Press Fn key + [
] to turn on/off the LED backlight feedback. ]+[
Pinch Out : Zoom in Pinch In : Zoom out
] to change to touch panel mode.
4. LED backlight settings
Press [
Tap : Right click Top ↔ Bottom Slide : Screen scroll Left ↔ Right Slide : Swipe Page
Left ↔ Right Slide : Switch full screen applications Slide to Top : Displays Mission Control Slide to Bottom : Displays applications
Pinch In : Display launch pad ( Launchpad shortcut key such as control+L must be set beforehand )
] to change the LED backlight brightness level.
5. Restoring settings after power loss
Keyboard settings and LED backlight settings will be automatically restored if you previously saved the settings. If you didn t save the settings, you have to set them up again.
Caution : Please make sure the correct shortcuts are setup in the settings program
・5 Fingers
Pinch Out : Display desktop
1st Revision 2015/9/1 UPQ Inc. All rights reserved.
