Transcript
MT402
Aztech Air Purifier USER MANUAL
Please retain this User Manual for future use.
SAFETY INSTRUCTIONS •
Remove the power plug before doing any maintenance, cleaning, or relocation of the appliance.
•
Do not use wet hands to operate the appliance, and insert or remove its power plug to prevent electrical shocks. It is suggested to thoroughly dry your hands before operating the Air Purifier.
•
Do not obstruct the wind outlet/inlet of the appliance. Doing so will reduce the Air Purifier’s air cleaning efficiency.
•
The Air Purifier is not a toy; hence it is prohibited for children to play with the appliance in order to prevent damage. A Child Safety lock has been provided for such instances.
•
Do not sit or stand on the appliance.
•
When an operating irregularity occurs, please unplug the power and send the appliance to the maintenance center for repair.
•
When unplugging the power plug, do not pull its cord. Hold the power plug properly on its base to unplug it from the power outlet.
•
Do not place ANY OBJECT on top of the Automatic Lifting Cover.
•
Position the Air Purifier on a smooth and stable ground. Placing the appliance on unstable surfaces such as softly cushioned carpets or sofa, may make the appliance lose its balance.
•
Do not use the appliance near water resources or volatile flammable items to prevent electrical shocks.
•
Do not position the appliance in hot places or in places commonly exposed to multiple sources of heat such as refrigerators or computers.
•
Should damages be found in the appliance, please do not use the appliance and immediately send the appliance to the maintenance center for repair.
•
Do not place any flammable materials near the appliance, or position the Air Purifier in an enclosed location where these materials are present
•
Do not rinse the appliance with water.
•
When cleaning, use a soft, dry cloth to wipe the appliance gently, or use a small brush to softly clean the wind inlets and outlets.
•
Do not clean the appliance with any type of acid-based solutions to prevent damage and electric shock.
PACKAGE CONTENTS 1) Air Purifier
4) Warranty Card
2) Remote Control 3)
User Manual
AIR PURIFIER FEATURES Air Purifier
Remote Control
1. Control Panel. Displays the controls and Indicator Lights 2. Button Configuration. Features the built-in control buttons of the Air Purifier 3. Automated Lifting Cover. Automatically opens and closes when you turn the appliance ON/OFF. Always ensure this cover is NEVER blocked. 4. Hidden Handle. Provided to help you carry the appliance. Please note that these handles are hidden with handle covers on the side. 5. Filters. Filters all contaminants and is composed of Initial, HEPA, and Activated Carbon Filter. 6. TiO2 Photocatalyst (Titanium Oxide). Completely decomposes bacteria and viruses, converting these harmful contaminants to harmless CO2 and H2O. 7. Base. A non-slip pad that supports the Air Purifier. 8. Air Inlet. Untreated-air passes into these inlets (with two on each side). These inlets should always remain UNOBSTRUCTED. 9. Rear Cover. Power will be cut off automatically if the rear cover is removed. Always keep the rear cover SECURELY CLOSED. 10. Brushless DC Motor. Is highly efficient and energy saving. Compared with a
common motor, the Brushless DC Motor saves up to 30%-40% of energy, with longer lifespan and less noise. 11. Odor Sensor. Detects the current odour in your room to identify it as Good Air, Moderate Air, and Poor Air, and switches to a corresponding speed after detecting its quality. 12. Dust Sensor. Detects dust particles bigger than 1um present in your room, and switches to the best cleaning mode which can clean effectively. 13. Ionizer. Generates negative ions known as “vitamins in the air” that cleans the air, allowing the indoor atmosphere to become fresher and cleaner. 14. ON/OFF Switch. Switches the Air Purifier ON or OFF. 15. Speed Options. Adjust the speed of the Air Purifier (Low, High, Turbo, Sleep) 16. Child Safety Lock. Disables the built-in controls of the Air Purifier. 17. Sleep Mode. Enables the lowest noise producing mode of the Air Purifier. 18. Auto-mode. Enables automatic speed shifting through detected air quality. 19. Timing Options. Shifts the hours of operation of the Air Purifier (1H / 4H/ 8H)
INDICATORS and BUTTONS
5 - STEP OPERATION & USE STEP 1: Unpack the Filters Place both hands at the rounded bottom corners of the rear cover and pull it upwards to open the rear cover. Remove the plastic covers of the filters and place it back again.
STEP 2: Position it PROPERLY Place the Air Purifier on a smooth and stable ground. Ensure that there are no flammable materials near the appliance, and that the Air Inlets are not blocked by any object and are 25cm away from walls.
25cm *Smooth and Stable
STEP 3: Plug it to a Power Outlet Plug the Air Purifier to a 220V power outlet.
STEP 4: Power it ON
On the Button Configuration of the Air Purifier or on its remote control, press the ON/OFF button to turn ON or to turn OFF the Air Purifier.
STEP 5: Choose the Cleaning Mode
Either select your cleaning mode by (1) pressing the Wind Speed button to shift between the different modes, or (2) by pressing the Automatic Mode Button to set it Auto mode.
1 2
CARE and CLEANING Cleaning the Initial Filters The initial filters are hand washable and are RECOMMENDED to be cleaned or replaced when the Air Purifier has reached 100 to 300 hours of work (depending on room air quality).
Replacing the Filters 1. Unplug the Air Purifier and place both hands at the rounded bottom corners of the rear cover and pull it upwards. 2. Pinch the white belts on the filters, and pull all of the 4 filters out. 3. Replace new filters with the white belts facing outwards. The INITIAL FILTERS on the other hand, should face its respective air inlet. 4. Place the rear cover from top to bottom and ensure that the middle and bottom part is tightly sealed.
FREQUENTLY ASKED QUESTIONS Question 1: My Air Purifier is not working • Check if the Power is ON. Press the ON/OFF button to turn ON the Air Purifier • Check if the plug is loose or broken. Try reconnecting the power plug to the power outlet. • Check if the Rear cover is installed correctly. The Air Purifier would not turn ON if the Rear Cover is lose. Question 2: The air coming out of has an odour • The filters are carrying too many dusts particles. Please change the filters of the Air Purifier. • It is also possible that the filter’s lifespan has expired. Please change the filters of the Air Purifier. Question 3: The Air Purifier does not perform well • Your room might be too dry or is not properly ventilated. You may slightly open the room’s door or window/s to increase indoor humidity. • Check if the air inlets and the automatic lift cover do not have any blockage or is not blocked by any object. If these are blocked, change the location of the air purifier, or remove the external objects blocking the inlets. Question 4: The Remote Control is not working • You might have exceeded the control range. Try moving closer to the Air Purifier. • Check if the batteries are installed (CR2032/5004LC batteries). • Check if the batteries are installed correctly. • Check if the batteries are already dead. Replace it with new CR2032/ 5004LC batteries. Question 5: I have just replaced the filters but the Filter Replacement Reminder is still blinking After changing the filters, press the Speed Options Button for 3 seconds to reset the filter timer. Question 6: I have an Air Purifier problem not listed here Please visit www.aztech.com/support. Feel free to call us or send us an email with the contact details provided on our site. Our customer service representatives would willingly help you with your problem.
Copyright © 2014 Aztech Technologies Pte Ltd (CRN:199800635M ). All rights reserved.
