Transcript
CONTENTS
Hand-free Audio Doorphone Kits
Product Description ...................... 1 Package Contents ........................1 Safety Instruction .........................2 System Installation .......................2 Wiring Diagram ............................4 Operation Instruction ....................5 Technical Specifications ...............6
MODEL：RL-3201B
USER MANUAL
1. Water-proof, damage-proof, oxidation-proof and abrasion-proof zinc alloy panel outdoor unit.
Keep the indoor unit away from high temperature such as near an oven or in direct sunlight and high humidity such as bathroom and greenhouse.
2. Hand-free intercommunication.
Do not touch the unit with wet hands.
3. Electric-controlled lock release function.
Clean the camera or screen with a soft cloth and alcohol. Do not use detergent,
4. Outside gate release function.
thinner,volatile or corrosive liqid.
5. Outdoor monitoring.
Avoid throwing,dropping or hitting of the units.
6. Enclosed adapter for DIY.
Use the product under the circumstance of barrier-free and no inteference.
7. The indoor unit can be hung on the wall.
× Caution 1. To prevent damage, the adapter should be fasten on the wall according to instruction. 2. Power plug as disconnecting device should be kept convenient to operate.
A、Indoor unit Indoor unit ×1
Outdoor unit ×1
Rain shade ×1
Adapter ×1 50 mm
Screws ① Fix the two screws. ② Connect the indoor unit as per the wiring diagram. ③ Hang the indoor unit on the screws, put the adapter into AC power and it is ready to use
1
2
B、Outdoor unit
Wiring Diagram A
①
1.Audio wire 2.Ground wire 3.Power wire for unlocking 4.Power wire
② 1 2 3 4 5 6
① Fix the outdoor unit 1.4~1.7m high from the ground, drill three proper holes on the wall and fix the rain shade on the wall with screws. Electric-controlled lock
② Do the outdoor unit wiring as per the diagram
D C12V
Outdoor Unit
③
Outdoor Gate
Indoor Unit
④
③ Put the outdoor unit into the rain shade
Wiring Diagram B
1.Audio wire 2.Ground wire 3.Power wire for unlocking 4.Power wire
④ Fix the outdoor unit with screws
C:Lengthening connecting wire:
1 2 3 4 5 6
2
The enclosed cable is 15m.RVV4 x 0.5mm connecting wire can be chosen if you want to lengthen it to 15-50m; RVV4x0.75mm2 connecting wire can be chosen if you want to lengthen it to 50m-100m. 1. Unlock from outdoor unit :Connect the wiring terminals 1,2,3,4 of indoor unit with wiring terminals 1,2,3,4 of outdoor unit; connect the terminals 5,6 of indoor unit to
Electric-controlled lock
DC12V
Outdoor Unit
Outdoor Gate
Indoor Unit
2
electric-controlled lock with RVV2x1.0mm connecting wire. 2. Unlock from indoor unit: Connect the wiring terminals 1,2,4 of indoor unit with wiring terminals 1,2,4 of outdoor unit,connect 2,3 of indoor unit to electric-controlled lock and 2
5,6 to gate outdoor unit with RVV2x1.0mm connecting wire. Please refer to the wiring diagram.
3
4
Outdoor Unit
SPEAKER
WIRING TERMINAL CALL BUTTON
MICROPHONE
Adapter Input Voltage
AC100-240V 50Hz /60Hz
Adapter Output Voltage&Current
DC12V 1100mA
Monitoring time
120S±10%
Talking time
40S±10%
Working Distance
50m(4×0.5mm 2)
Power Consumption
Static state <0.2W，Working state <2W
Operating Temperature
-10℃ ～+40℃
Relative Humidity
Indoor Unit
10%～90%（RH）
SPEAKER
LED LIGHT MONITOR
VOLUME
GATE UNLOCK UNLOCK
MICROPHONE TALK
1. Press CALL button of outdoor unit and graceful rings will be heard from indoor unit . You can talk with them and see them just by touching TALK button ( )of indoor unit for about 120 seconds. 2. Touch UNLOCK button( ) to release the door. 3. Touch GATE UNLOCK button( ) to open the outside gate. 4. Touch MONITOR button( ) to monitor the outside for about 40 seconds each time. 5. The host can talk with the visitor by touching the TALK button( ) after touching MONITOR button( ). Touch TALK button( ) again to end the talk. 6.The talking volume can be adjusted through the right knob for best performance.
5
6
