Transcript
User Manual EX0101-P40
HDMI over Single CatX Cable Extender
Version: V1.0.0
Table of Contents Introduction .................................................................................................... 2 Overview................................................................................................... 2 Features ................................................................................................... 3 Package Contents .................................................................................... 4 Specifications ............................................................................................ 5 Panel Description ..................................................................................... 7 Transmitter......................................................................................... 7 Receiver ............................................................................................ 9 Hardware Installation................................................................................... 11 EDID and EQ Management .......................................................................... 13 EDID Management ................................................................................. 13 EQ Management .................................................................................... 13 Troubleshooting ........................................................................................... 14
1
Introduction Overview EX0101-P40 is a pair of HDMI extender used to extend Full HD 1080p signals up to 131 feet (40 meters) over a single CatX cable. The transmitter supports EDID management, which offers multiple EDID options for various resolutions output. And the receiver supports EQ management, which provides multiple EQ options for various applications and equalizes the signals for better viewing effects. This extender is ideal for various applications, such as homes, offices, digital entertainment centers, control centers, conference rooms, schools and corporate training environments, which require the distribution of an HDMI source signal to a single HDMI display over long distances.
2
Features
Ultra-slim appearance, space saving and easy-to-install
Supports Full HD 1080p signal transmission distance up to 131 feet (40 meters) via a single CatX cable, reach to 262 feet (80 meters) under special condition
Single CatX cable solution, including the transmission of HD audio/video and IR signals
Supports all high definition resolutions: 1080p, 1080i, 720p with screen refresh rates of 24Hz, 30Hz, 50Hz and 60Hz
HDMI v1.3a & v1.4 with full 3D compatibility
USB power supply
±3KV higher than the industry average ESD protection to ensure the quality
HDCP compliant
integrated EDID DIP on Transmitter, offers multiple EDID options for various resolutions output and ensures that the HDMI source reliably outputs correct content for display
Supports EQ setting, provides multiple EQ options for various applications and equalizes the signal for better viewing effects
3
Package Contents
1 x Transmitter EX0101-P40-TX
1 x Receiver EX0101-P40-RX
2 x 5V USB Power Lead
4 x Mounting Ear
1 x User Manual
4
Specifications Technical Data Range Maximum Distance
6.75Gbps (Maximum) 1080p up to 40m/131ft (It can reach to 80m/262ft under special conditions) Transmitter
I/O Connections
1 x Video OUT, 1 x HDMI IN, 1 x IR OUT Receiver 1 x Video IN, 1 x HDMI OUT, 1 x IR IN
Power Supply
5VDC, 1A
Power Consumption
Transmitter: 3.65W Receiver: 1.2W
Input Video Signal
1.2 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Maximum Single Link Range
1080p 24bit colour depth
Video Format Supported
DTV/HDTV: 480i, 567i, 480p, 576p, 720p, 1080i, 1080p
Output Video
HDMI 1.3a + HDCP (mirrors the input source to the output display)
IR Wavelength & Frequency
Wavelength: 940nm IR Frequency: 38 KHz Human-body model:
ESD Protection
±8 kV (Air-gap discharge)
±4 kV (Contact discharge) 5
Technical Voltage: ±1 kV Surge Protection
(Ten times respectively for the positive and negative voltage)
Operating Temperature
32°F ~ 95°F (0°C ~ 35°C) 10% ~ 90%, non-condensing
Storage Temperature
-4°F ~ 140°F (-20°C ~ 70°C) 10% to 90%, non-condensing
General Product Dimension (W x H x D)
100 mm × 15.8 mm × 63.8 mm / 3.94'' x 0.62'' x 2.51'' (each)
Weight
0.14 kg (each)
Certification
CE, FCC, RoHS
6
Panel Description Transmitter Top Panel
1
ID
Indicator
1
Status
2
Power
2
Description On: Transmitter and Receiver are linked. Off: Transmitter and Receiver are not linked. On: Transmitter is powered on. Off: Transmitter is powered off.
7
Front Panel
1
2
3
4
ID
Connector/Switch
Description
1
VIDEO OUT
Connects to the Receiver.
2
IR OUT
Connects to the supplied IR Emitter.
3
HDMI IN
Connects to HDMI source devices.
EDID DIP Switch
Manage communication between connected devices and transmission over cable distances
4
Rear Panel
1 ID
Connector
Description
1
DC 5V
Connects to the USB power lead.
8
Receiver Top Panel
1
ID
Indicator
1
Status
2
Power
2
Description On: Transmitter and Receiver are linked. Off: Transmitter and Receiver are not linked. On: Receiver is powered on. Off: Receiver is powered off.
9
Front Panel
1
2
3
4
ID
Connector/Switch
1
VIDEO IN
2
IR IN
3
HDMI OUT
Connects to HDMI display device.
EQ
Manage communication between connected devices and transmission over cable distances.
4
Description Connects to the Transmitter. Connects to the supplied IR receiver (30KHz -50KHz)
Rear Panel
1 ID
Connector
Description
1
DC 5V
Connects to the USB power lead.
10
Hardware Installation 1. 2.
Connect an HDMI source (such as a Blu-Ray, games console, media server etc.) to Transmitter using quality HDMI cables. Connect a good quality, well terminated Cat5e/6 cable between the video output of the Transmitter and video input of Receiver.
Note: 40m/131ft is the recommended transmission distance for this model and denotes perfect transmission conditions – including straight cable runs with no electrical interference. If any of the above is a factor in your installation, transmission range maybe affected. 3. Connect the HDMI display (LED/LCD display or projector) to the HDMI output of the Receiver. 4. Connect IR emitters from the IR OUT port of Transmitter and firmly attach the IR emitter eye directly over the infrared receiving sensors of the source device to be controlled. Location of the emitter eye may need to be adjusted later to achieve best IR performance. 5. Insert IR receivers into IR IN port of Receiver. Position of the IR receiver eye on or near the source device, ensuing using a clear line of sight to remote handset used to control it. 6. Connect the 5V USB power lead included to the Transmitter and Receiver and power on all devices. Check Power and Status lights are illuminated on both Transmitter and Receiver to indicate a successful connection.
11
4 HDMI
1
Transmitter
CatX Cable
IR TX
DVD
2
5
3
Receiver
HDMI IR RX
TV
DVD Remote
12
EDID and EQ Management EDID Management The following table lists the EDID information built in the device. Position Functions 1 (Default)
EDID Copy Mode (Copy EDID from display)
2
1080i, 2CH
3
1080p, 2CH
Note: Repower the transmitter for the changes to take effect.
EQ Management The following table lists the EQ information built in the device. Position Transmission Distance L
0-15 meters / 0-49ft.
M (Default)
20-40 meters / 67-130ft.
H
80 meters / 262ft.
Note: There is no need to repower the receiver after change EQ settings. The unit will automatically equalize the signals for better viewing effects.
13
Troubleshooting 1. Why the display connected to the Receiver shows no picture?
Check that all the devices are powered on and working properly. Check that all the cables are qualified and connected properly Check that the display works properly, and that the source device has normal signals output.
Make sure that the display device supports HDCP.
Check that the length of HDMI cable and CatX cable.
Check that no compatibility issues exist between Receiver and the display. If so, replace the display with other models.
2. Why the display connected to Receiver displays snow or mosaic?
Check that all the cables are qualified and connected properly. Check that the source input device has no problems, such as snow, mosaic or a damaged disc. If so, replace it with another normal input source. Check that no compatibility issues exist between Receiver and the display. If so, replace the display with other models.
14
AV Access Technology Co., Ltd. B4, B block Tianrui Industry Park, Xinhe Fuyuan Rd, Fuyong St., Baoan District, Shenzhen, China America, Africa Sales & Market Ms. Suze Leung
[email protected] Europe, Asia, Middle East Sales & Market Ms. Jessica Lee
[email protected] Tel: 0086 755 21620553 Fax: 0086 755 26883498
