Transcript
Extended Ethernet 100 Series Chassis
EE1R3
User Manual
Extended Ethernet User Manual
TABLE OF CONTENTS
1
OVERVIEW ................................................................................. 3 1.1
INTRODUCTION ............................................................................................ 3
1.1.1 EE1R3 ............................................................................................... 3 1.2 TECHNICAL SPECIFICATION .............................................................................. 3
2
INSTALLATION ............................................................................. 4 2.1
PACKAGE CONTENTS ...................................................................................... 4
2.2
CONFIGURATIONS ......................................................................................... 4
2.2.1 Physical Connections ........................................................................... 4 2.3 INSTALLATION METHOD................................................................................... 5 2.3.1 Chassis .............................................................................................. 5 2.4 POWER CONNECTIONS .................................................................................... 5 2.5
LED STATUS ............................................................................................... 6
3
TROUBLESHOOTING ...................................................................... 7
4
SYSTEM INSTALLATION EXAMPLE ...................................................... 7
5
DIMENSIONS ............................................................................... 8
6
WARRANTY ................................................................................ 9
7
6.1
WARRANTY INFORMATION ................................................................................ 9
6.2
CLASS A ITE ............................................................................................ 10
6.3
FCC ....................................................................................................... 10
6.4
UL ......................................................................................................... 10
INSTRUCTION OF DISASSEMBLY ...................................................... 11
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 2 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
1 Overview 1.1 Introduction This manual covers the EE1R3 chassis to be used with the KBC EE1CL series 10/100 Ethernet line drivers.
1.1.1 EE1R3 The EE1R3 chassis allows the KBC EE1CL series, 10/100 Ethernet line drivers to be mounted in a 2.4U, 19” chassis configuration. The chassis supports up to fifteen media converters which are hot-swappable. The chassis is provided with an integral 100 ~ 240Vac, 3.3A power supply and an AC power cord. A fan provides air-flow for system cooling and there are LED indicators for power and fan status.
1.2 Technical Specification
Connectors Converter Slots
15
Electromagnetic compatibility Interference
FCC Part 15 Class A, CE
Power Power Input Power Consumption Power Output Per Slot
100 ~ 240Vac, 3.3A 10.7 W / 36BTU – power supply only 88.3W / 301BTU – fully loaded 5V, 1A
Environmental Operating temperature
0°C - +50°C / 32F° - +122°F
Storage temperature
-40°C - +70°C / -40F - + 158°F
Relative humidity
5% - 90%, Non-condensing
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 3 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
2 Installation 2.1 Package Contents
Media converter chassis with integral power supply unit
Mounting brackets for 19” enclosure
Rubber feet
AC power cord
Manual
Note: Extended Ethernet EE1CL units are sold separately.
Please contact you dealer or distributor if a part is missing or damaged within 10 days of receiving products.
2.2 Configurations 2.2.1 Physical Connections
P1 P2 FA FB
Chassis front view
Chassis rear view
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 4 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
2.3 Installation Method 2.3.1 Chassis
Remove all packaging material
If chassis is to be mounted in a 19” enclosure, attach the supplied rack mount brackets to the converter chassis.
Locate the converter chassis with the 19” mounting rails and attach using the screws provided.
With the power switch in the ‘OFF’ position, connect the power cord and then select the ‘ON’ position for the power switch.
Insert the EE1CL units into the EE1R3 chassis as required.
Connect required media cables to the EE1CL devices.
See section 3.5 for LED status.
2.4 Power Connections This unit must be powered by a 100 ~ 240Vac, 3.3A power supply, this is an integral unit which is supplied with the chassis.
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 5 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
2.5 LED Status
LED
Status
Description Power
PWR
ON
Power is supplied to the chassis
OFF
No power to the chassis
FAN FAN A
ON
The fan is functioning correctly
OFF
The fan is not powered or there is a fault with the fan
Note: PWR2 and FAN B LEDs are not used on this product.
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 6 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
3 Troubleshooting When the chassis is powered on, the green PWR LED will light to indicate the presence of power. If the green light does not come on check that the power switch is in the ‘ON’ position. With power to the chassis the green fan light should be lit to show that the fan is functioning correctly. If the fan LED remains off when the power is on there is a fault with the Fan please contact KBC Networks.
4 System Installation Example
Figure 4.1 EE1R3 Typical System Installation
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 7 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
5 Dimensions
440mm
88.5mm
P1 P2 FA FB
Chassis depth 140mm
Chassis front view
Chassis rear view
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 8 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
6 Warranty 6.1 Warranty Information KBC extends the following LIMITED WARRANTY to the original owner/purchaser of this product as follows: - Five years from the date of initial sale for Ethernet switches. - Two years from the date of initial sale for all wireless and other network products. - Five years from the date of initial sale for all fiber products. 1) If, within the specified warranty period, this product, or any part or portion thereof, shall prove upon examination by KBC, to be defective in material or workmanship, KBC will repair or replace such part or portion at KBC’s option. The warranty period on the repaired or replaced part or portion of this product shall be limited to the unexpired term of the original warranty. The buyer shall be responsible for all shipping and transportation of the product to KBC for any performance under this warranty. 2) Conditions and Exceptions: a) Any accident to this product, any misuse or abuse, alternation, use in modified form, or any attempt to repair this product shall void this warranty. These conditions to the warranty include, but are not limited to, incorrect power connections, physical damage due to mechanical shock, exposure to moisture, and circuit modification. b) SHOULD THIS PRODUCT PROVE DEFECTIVE FOLLOWING PURCHASE, THE BUYER, NOT THE MANUFACTURER, DISTRIBUTOR, OR RETAILER, ASSUMES THE ENTIRE COST OF ALL SERVICING OR REPAIR, EXCEPT AS OTHERWISE PROVIDED BY THE TERMS OF THIS WARRANTY. c) FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY ON THIS PRODUCT, THE BUYER IS LIMITED TO THE FOLLOWING DAMAGES. (1) THE COST OF LABOR TO REPAIR OR REPLACE DEFECTIVE PARTS OR PORTIONS OF THIS PRODUCT, AND (2) THE COST OF THE REPAIRED OR REPLACE PARTS OR PORTIONS OF THIS PRODUCT. d) NO OTHER EXPRESSED OR IMPLIED WARRANTIES HAVE BEEN MADE OR WILL BE MADE ON BEHALF OF KBC WITH RESPECT TO THE SALE, REPAIR, INSTALLATION, OPERATION, OR REPLACEMENT OF THIS PRODUCT. KBC DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OF THIS PRODUCT OR ITS FITNESS FOR ANY PURPOSE, AND THE BUYER AGREES THAT THIS PRODUCT IS SOLD “AS IS” AND THAT THE ENTIRE RISK OF QUALITY AND PERFORMANCE OF THIS PRODUCT IS WITH THE BUYER, EXCEPT AS OTHERWISE PROVIDED BY THE TERMS OF THIS WARRANTY. e) Some states/jurisdictions do not allow exclusions or limitations of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. f) If you do not wish to be bound by any of the provisions in this warranty, please return the product(s) immediately. 3) Contact your dealer regarding return authorizations for out of warranty repairs and any further product information. This warranty does not apply in Australia.
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 9 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
6.2 Class A ITE This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
6.3 FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful Interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own expense.
6.4 UL Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading. Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 10 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
7 Instruction of Disassembly Instruction of Disassembly of KBC Product (For EU Directive 2002/95/EEC-WEEE) Tools required:
No. 1 Phillips screwdriver
No. 2 Phillips screwdriver
Steps for disassembly: 1. 2. 3. 4.
Remove screws to cover plate. Remove cover plate. Remove mounting screws for printed circuit board (PCB). Take out all PCBs.
Notice: When a product reaches the end of its life, return to KBC Networks.
Manual-EE1R3_Series-Rev1208A Copyright © KBC Networks Ltd. 2012
Page 11 of 12
www.kbcnetworks.com
data delivered
KBC Networks 25691 Atlantic Ocean Drive Suite 3B Lake Forest, CA 92630 U.S.A Americas Phone:
1-949-297-4930
Fax:
1-949-297-4933
KBC Networks Ltd., EMEA KBC Networks Ltd. Barham Court Teston, Maidstone Kent, ME18 5BZ United Kingdom Phone:
+44(0)1622 618787
Fax:
+44(0)20 7100 8147
Email:
[email protected]
Web:
www.kbcnetworks.com
