User Manual – Data Sheet Economical Poe Extender Mini

Transcript

User Manual – Data Sheet Economical PoE Extender Mini-Power Mini-Power Tx Mini-Power Rx Description: The Mini-Power kit is the most economical PoE over Coax Solution. By using novel technology, PoE signal can convert into coaxial cable with a passive Tx. After passing through the remote Rx, PoE signal has converted back to Ethernet port. The Rx can retrieve power from PoE signal without local power injection. This converter pair is compatible with IEEE 802.3 af & at and provides >30W /0.75A PoE power through RG59 or RG6 coaxial cable. The transmission distance over RG59 coax cable is up to 250m and 150m at 10 and 100 Mbps, respectively. Copyright by EnConn www.enconn.com 1/5 Technical Specification: Model Number Mini-Power Tx Mini-Power Rx Interface Data + Connector Power Port Data+ Power Port Cable 1 RJ-45 female connector (PoE IN) 1 BNC female connector (IN) 1 BNC female connector (OUT) 1 RJ-45 female connector (PoE OUT) RG59, RG6 75 ohm video grade Coaxial Cable Electrical Specifications Standard IEEE 802.3af/at or Pre-at Speed 10/100Mbps for full duplexer 10Mpbs : 250m @ RG59 / 300m @RG6 100Mpbs: 150m @ RG59 /200m @RG6 Transmission distance Power YES Powered by PoE 42~57 VDC 37~57 VDC 42~57 VDC 36~56 VDC 0.75A 0.75A Remote Powering ability ----- Maximal 30W (Cable & power in dependant) Power consumption Zero <=3W Input Operating Voltage Output Voltage Maximal operating current Material & Size Enclosure material Dimension (WxDxH) Zink alloy Aluminum alloy 40mm x 32mm x 20mm (Not including connector) 90 mm x 55mm x 26.5 mm (Not including connector) Environment -10 to +60 degree C Operating temperature Note: Specifications subject to change without notice. Copyright by EnConn www.enconn.com 2/5 Application Copyright by EnConn www.enconn.com 3/5 Fig.1 Maximum PD power v.s. cable DC resistance Power-Rcable 35.00 30.00 Ppd(W) 25.00 20.00 15.00 10.00 5.00 0.00 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 Rcable(ohm) 40W PoE injector 1. Used 40W PoE power injector of PENT1040B5600F01 for test. 2. Cable DC Resistance = DC Resistance of Cable Inner conductor + DC Resistance of Cable Shield. 3. Typically, regular resistance of RG 6 is 13 ohm/100m. 4. Typically, regular resistance of RG 59 is 17 ohm/100m. 5. Typically, regular resistance of RG11 is 4.9 ohm/100m. 6. Resistance of Low resistance RG6 such as WC5CFB16-200H is 3.7 ohm/100m. 7. Resistance of Low resistance RG11 such as WC7CFB-A is 2.4 ohm/100m. 8. DC Cable Resistance should include Lan UTP Cable, 10ohm/100M (for standard POE interface, cat 5E) Copyright by EnConn www.enconn.com 4/5 Transmission Distance and Throughput: 50~250M - RG59 10Mbps; 50~150M – RG59 100Mpbs 100 90 80 70 60 Mbps 50 40 30 20 10 0 100Mbps 10Mbps RG59 50 100 150 200 250 Distance(M) 50~300M – RG6 10Mbps; 50~200M – RG6 100Mpbs 100 90 80 70 60 Mbps 50 40 30 20 10 0 100Mbps 10Mbps 50 100 150 200 Distance(M) Copyright by EnConn www.enconn.com 5/5 250 300 RG6