Transcript
User Manual Table of Content 1. Product Overview 2. Technical Specification 3. Operation Instructions
1. Product Overview
2. Specification Description
Specification
Display resolution
3.5 Inch TFT, 320x240 pixel
Connector
M12- 5 pin
Battery
Rechargeable Li-Polymer battery 3.7 (V)
Power adapter
VAC 100~240 (V), 50~60 (Hz), 0.3 (A)Max DC 5 (V) / 2.5 (A),12.5(W)
Compatible memory cards
SD Card 2~32 (GB), SDHC compatible Class-10
Photo storage format
JPEG (640 x 480)
Storage capacity
Approximately 10,000 pictures or 180 min of video on a 2GB SD Card.
Total weight Working temperature
400 g 0~50 (℃)
Storage temperature
-20~70 (℃)
Interface
Mini USB 2.0 AV Out/HDMI
Video format
MPEG4/avi
Video out format
NTSC & PAL
Frame rate
30 fps
Compression format
MPEG4/CVBS
Video size
120 min. = 1.4 GB
Zoom
4x
Battery life
4 hours
Functions
Snapshot, video recording, picture & video review on LCD screen, TV out, Storage of picture or video to SD CARD or USB storage, Transfer of picture or video to PC, Digital zoom, picture rotating, Recording and playback of voice
Power consumption
340 mA (5 V) Working/Charging time 4 hours @ 25℃
3. Operation Instructions Function
Operation Instructions
Power ON
Warning and Caution Statements:
Preview menu
Insert the SD CARD into main unit properly.
Connect the cable to main unit and screw tightly.
Press the POWER button of the main unit and wait for the start-up screen in a few seconds.
Screen with preview menu
Symbol descriptions Video mode Video recording time display
Camera mode Battery status
Figures/ Photos/Images
Magnification
Date/Time display
Magnification In preview menu, use DOWN button to control the magnification of preview from 1 to 4 times. The magnification factor is shown on the preview tab of Figure.
Video Record
In preview menu, confirm the icon on the top-right corner corresponding to video mode
. If not, then press REC
button to enter this mode.
In video mode, press REC button to record and the color of REC icon is changed to red
and the recorded
time displays at the top-left corner.
To stop recording, press the REC button again. The icon
appears for saving
data and then vanishes by showing the icon
as the previous status in video
mode.
The error symbol
will appear if
SD CARD is full during recording.
The Lock symbol
will appear if SD
CARD is locked. Please turn off the main unit and switch the SD CARD to unlock position.
Snapshot
Confirm the icon on top-right is ready for camera mode , and then press the PHOTO button to take a photo.
Pressing the PHOTO button, the icon on the top-right is changed to red the icon
while
appears for saving data and
then vanishes subsequently by showing the icon
and recovers into the
camera mode. Date and Time: In camera mode, press ESC key to display or hide all comments as well as the Date and Time display on preview tab. A photo saved has the same image as shown on screen.
Function Menu Memory free space
This system supports SD CARD and USB Flash storage device. In preview menu, press OK button to enter FUNCTION MENU shown in Figure. Use UP or DOWN buttons to select the FUNCTION and confirm with the OK button. The background color of selected symbol
will be changed to yellow
. Press OK button to enter the Memory mode.
The type of storage device and memory free space is shown in the first block. This symbol
represents that the
system is displaying memory status of USB Flash storage device. The symbol
shown in the second
block stands for Format of USB Flash storage device.
This symbol
represents that the
system is displaying memory status of SD CARD. The symbol
in this block stands
for Format of SD CARD. The system can read both SD CARD and USB Flash storage device at the same time but only displays the storage device latterly connected as shown in the first block.
To format selected storage device in the second block, press OK button to start formatting. The duration of formatting depends on the memory size. The symbol
stays on screen during
formatting and the symbol as formatting completed.
appears
The symbol
in the third block
stands for Return by pressing OK button back to FUNCTION MENU.
Date/Time Setting
In preview menu, press OK button to enter FUNCTION MENU shown in Figure. Use UP or DOWN buttons to select the FUNCTION and confirm with the OK button. The background color of selected symbol
will be changed to yellow
. Press OK button to enter the Date/Time setting mode. In the first block, Date can be set with UP or DOWN buttons. The background color of selected number will be changed to yellow. Press PHOTO button for decrement while REC button for increment.
In the second block, Time can be set with UP or DOWN buttons. The background color of selected number will be changed to yellow. Press PHOTO button for decrement while REC button for increment.
Auto Power Off
Auto Power Off can be set for 30, 25, 20, 15, 10, 5 minutes (enable) and 0 (disable) in the third block.
Selecting the symbol
will change
the symbol color to red . And press OK button will return to FUNCTION MENU.
Video Output AV Out
First connect the Phone plug of AV cable to the Video Output port of Main Unit and RCA connector to the external display unit, respectively. In preview menu, press OK button to enter FUNCTION MENU shown in Figure. Use UP or DOWN buttons to select the FUNCTION of AV out. Then the background color of selected symbol
is changed to yellow
.
Press OK button to enter the Video Output mode.
According to the required video format of external Display Unit, use the UP or DOWN button to select NTSC or PAL, press OK button and the AV from Main Unit will be transferred and displayed on external Display Unit. Selecting the symbol will cancel Video Output and return to Main Unit.
File Open/Delete
In preview menu, press OK button to enter FUNCTION MENU shown in Figure. Use UP or DOWN buttons to select the FUNCTION. The background color of selected symbol
will be changed to yellow
. Press OK button to enter the File Open mode. Use UP or DOWN buttons to select folders and furthermore files of a folder.
The folder name is given according to the Date (e.g. 20100930) displayed on Main Unit while the file name is recorded as Date and Time (e.g. 20150603153843). Attribute of Symbols: for folder for Video in AVI format for Photo in jpg format
Quick View
Use UP button to select folders and files to review.
Photo Inspection Photo Selection
Selecting Photo: Press UP button to select the previous photo while Down to next photo.
Photo Enlargement
Select photo and press Camera button to magnify from 1 to 10 times. The symbol with magnification factor is shown on the display unit.
Photo Rotation
Select photo and press OK button to rotate the photo by 90∘clockwise each time.
Photo Deletion
During reading Photo, press REC button to Delete the Photo with Confirmation. Select the symbol
, press OK
button to delete Select the symbol
, press OK
button to cancel Video Play Video Selection
Playing Video: Press DOWN button to select next section while UP to previous section.
Video Play/Pause
Selecting Video: Press OK button to Play or Pause Playing: this symbol appears on the bottom-left corner.
Pause: this symbol appears on the bottom-left corner. Time Tab at bottom of preview menu, Elapsed Time displays on the bottom-left corner. Total Time displays on the bottom-right corner. In Time Tab, the orange bar represents for the elapsed time while white bar for the rest time to play.
Video Fast Forward
Selecting Video: Long-Press DOWN button to play Fast Forwards. The symbol
appears at the
bottom-left corner. Video Review
Selecting Video: Long-Press UP button to play backwards The symbol
appears at the
bottom-left corner.
Video Deletion
Playing Video: Press REC button to Delete the Video or Cancel this selection by using UP or DOWN buttons with Confirmation during Video playing.
Select the symbol
, press OK
button to delete
Select the symbol LED Intensity Adjustment
to cancel.
Use LED Intensity Adjustment of Main Unit to regulate the Brightness of the LED. Clockwise Rotation will increase the light intensity. Counterclockwise Rotation will decrease the light intensity.
System Reset
Please use non-conductive small rod to press Pinhole Reset button for System Reset.
Audio REC/Play
Audio Recording only works during Video Recording. Please insert the Earphone into the port properly. Starting
Video Recording will execute Audio Recording synchronously.
Audio Playing only works during Video Playing. Please insert the Earphone into the port properly. Starting Video Playing will execute Audio Playing synchronously. HDMI Output
Connect the HDMI Cable to the HDMI slot of Main Unit and the external Display Unit. Video will be transferred and displayed on external Display Unit. Disconnecting the HDMI Cable from Main Unit will cancel Video Output and return to Main Unit for display.
PC Connection
Use USB Cable for connections between Main Unit and PC. After connecting, the dialog box appears with icons shown in Figure. Select the upper block
for
Data Mode, Data in SD CARD can be used. The USB Connection LOGO displays on screen. Select the lower block
for
Power Mode, Battery of Main Unit can be charged by using USB Cable.
System Setup
In preview menu, press OK button to enter FUNCTION MENU shown in Figure. Use UP or DOWN buttons to select the FUNCTION. The background color of selected
symbol
will be changed to yellow
. Press OK button to enter the System Setup.
Select the symbol
shown in the
first field and Press OK button to restore to the factory settings.
Select the symbol shown in the second field and Press OK button to return to the FUNCTION MENU.
Power Off
Press the POWER button of the main unit for 3 seconds to turn off the system.
