Transcript
Electronic Drum
TD90
User s Manual
Precaution Thank you for purchasing this electronic instrument.For perfect operation and security, please read the manual carefully and keep it for future reference.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the product.
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. (Figure 1) 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings,install in accordance with the manufacturer s instructions. 8) Do not install near the heat sources such as radiators, heat registers,stoves,or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug.A polarizedplug hase two blades with one wider than the other.A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety,if the provided plug does not fit into your outlet.consult an electrician for replacement of the obsolete
apparatus. When a cart is used,use caution when moving the cart/apparatus combination to avoid injury from tip-over(Figure 1). 13) Unplug this apparatus during lightning storms or when unused for a long periods fo time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,such as powersupply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus,the apparatus has been exposed to rain or moisture,does not operate normally, or has been dropped. WARNING:To reduce the risk of fire or electric shock,do not expose this apparatus to rain or moisture. CAUTION:Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,such as vases,shall be placed on the apparatus.
Electronic Drum
Contents
Panel Controls ..............................................................................................................2 Assembly Instruction .....................................................................................................4 Connection..................................................................................................................10 Start to Play the Drum ..................................................................................................12 1.Switch the Power On ................................................................................................12 2.Set the Main Volume ................................................................................................12 3.Enter and Return .....................................................................................................12 4.Tempo......................................................................................................................12 5.Select Drum Kits ......................................................................................................13 6.Kit ..........................................................................................................................14 7.Effect ...................... ................................................................................................23 8.Pad .........................................................................................................................23 9.Click ........................................................................................................................24 10.Song .....................................................................................................................25 11.Drum On/Off ..........................................................................................................26 12.Start/Stop ..............................................................................................................26 13.Rec/Play ................................................................................................................27 14.Factory Set.............................................................................................................29 Content of LED-Display................................................................................................31 Drum Kits List .............................................................................................................32 Voice List ...................................................................................................................33 Song List.....................................................................................................................36 MIDI Implementation Chart .........................................................................................37 Specifications..............................................................................................................38
1
Electronic Drum
Panel Controls Front Panel 13 HH-CTRL
17
14
15
16
HI-HAT
BD KICK
SNARE
TOM1
TOM2
18 TOM3
CRASH
19 RIDE
TD90 1
VOLUME CONTROLS
3
4
MASTER
MIN
MAX
PHONES
MIN
5
MAX
MAIN MENU
AUX IN
MIN
KIT
CHOOSE: PAD / EFFECT / COPY KIT/TRIGGER SAME/INDIVIDUAL COPY TO POSITION: 26-30 CHOOSE: REVERB/CHORUS ADJUST: TYPE/LEVEL CH1,CH2,CH3,CH4,FB, FLG,SDL,FDL,OFF ADJUST: TYPE/LEVEL R1,R2,R3,H1,H2,PLA,DLY,PDL,OFF PAD SELECT: HHC,HH,BD/KICK,SN,T1,T2,T3,CR,RI ADJUST: INSTRUMENT/LEVEL/SENSITIVITY/ THRESHOLD/VELOCITY CURVE
MAX
6
8
10
ENTER
2
7 TEMPO 9
CLICK
11
CHOOSE: LEVEL/TIME SIGNATURES/SOUND
REC/PLAY CHOOSE: RECORD/PLAY/CLEAR CHOOSE: M01,M02,M03 CHOOSE: M01,M02,M03 START/STOP ADJUST: VOLUME CHOOSE: M01,M02,M03 START/STOP SONG SONG SELECT START/STOP ADJUST: VOLUME
12
EFFECT
KIT
PAD
REC/ PLAY
SONG
START/ STOP
CLICK
TO RESET A FUNCTION TO FACTORY DEFAULT VALUES, PRESS + AND - WHILE PRESSING THE DESIRED FUNCTION KEY. FUNCTIONS THAT CAN BE RESET ARE KIT, PAD, EFFECT, CLICK AND REC/PLAY.
DRUM ON/OFF
PHONES
32
Rear Panel
RIDE
CRASH
TOM3
TOM2
TOM1
SNARE
BD KICK
HI-HAT
HH-CTRL
AUX IN
MASTER OUT
MIDI IN
MIDI OUT
DC 9V POWER ON
26
25
24
23
22
21
20
27
28
29
OFF
30 31
In [SONG] Mode In [KIT] Mode In [PAD] Mode
2
Electronic Drum
Front Panel
Rear Panel
1. LED Display 2. DATA DIAL 3. [MASTER VOLUME] knob 4. [PHONES VOLUME] knob 5. [AUX IN VOLUME] knob 6. [TEMPO+] button 7. [TEMPO-] button 8. [ENTER] button 9. [RETURN] button 10. [+/-] button 11. [KIT] button [EFFECT] button [PAD] button [CLICK] button 12. [SONG] button [DRUM ON/OFF] button [REC/PLAY] button [START/STOP] button
20. 21. 22. 23. 24.
[HH-CTRL] jack [HI-HAT] jack [BD KICK] jack [SNARE] jack [TOM1] jack [TOM2] jack [TOM3] jack 25. [CRASH] jack 26. [RIDE] jack 27. [AUX IN] jack 28. [MASTER OUT] jack 29. [MIDI IN] jack [MIDI OUT] jack 30. DC 9V 31. POWER ON/OFF 32. PHONES jack
Indicator Lamp 13. 14. 15. 16. 17.
[HH-CTRL] [HI-HAT] [BD KICK] [SNARE] [TOM1] [TOM2] [TOM3] 18. [CRASH] 19. [RIDE]
3
Electronic Drum
Assembly Instruction Drum Stand Assembly
1
1.Insert the left support into the base rack clamp, tighten the set-screw. 2.Set up the knighthead, tighten
(1)
(2)
the set-screw.
2
1.Insert the right support into the base rack clamp, tighten the set-screw. (1)
2.Set up the knighthead, tighten (2)
3
the set-screw.
(1)
1.Insert the mid-tube into left and right support rack clamps. (2)
Tighten the set-screw with
(2)
your tuning key. 2.Set up the knighthead. Tighten the set-screw with your tuning key.
4
Electronic Drum
4
Insert the left and right support arm into the rack clamp. Tighten the set-screw.
Drum Pad Assembly 1
1.Insert the rod into the pad hole, set to a fine- position and tighten the screw. 2.Insert the pad rod into rack clamp, set to a fine- position and tighten the T-screw.
Cymbal and Hi-hat Assembly 1
Insert the cymbal stand(longer) into the rack clamp and tighten the T-screw.
5
Electronic Drum
2
Insert the Hi-Hat stand(the shorter one) into the rack clamp and tighten the T-screw.
3 wing nut
felt washer
1.Take out the wing nut and felt washer. 2.Place the cymbal over the tilter peg. put the felt washer and wing nut onto the cymbal. Tilt the cymbal to your preference.
Hi-Hat Cymbal
Crash Cymbal
Module Assembly 1
1.Insert the module into the rack clamp. 2.Tighten the T-screw.
6
Electronic Drum
Kick Assembly 1
Place the snare onto the plate(1), tighten the screw.
1
2
Screw
Set up plate(2) and tighten the screw. 2 1
3
3
Set up plate(4) on the plate (3), tighten the screw with your screw-driver.
4
7
Electronic Drum
4
2
1
2
1 3
4
Set up plate(3) on the plate (2), and mount the plate (4) on the plate (1), tighten the screw with your screw-driver.
4
3
5
Attach drum pedal to the batter side hoop with hoop holder clamp and tighten the T-screw.
6
Insert the beater shaft into the beater link and tighten the key bolt.
8
Electronic Drum
Caution! To prevent electric shock and damage to the devices, make sure the power is switched OFF on the drum and all related device before making any connection.
Connecting the Pads and Pedals Using the provided cables, connect each Trigger input jack on the rear panel of the module and make sure each pad is connected to its corresponding Trigger input jack.
TO CRASH
TO RIDE
TO HI-HAT
TO TOM2
TO TOM1
TO TOM3
TO SNARE
TO BD KICK
TO HH-CTRL
RIDE
CRASH
TOM3
TOM2
TOM1
SNARE
BD KICK
HI-HAT
9
HH-CTRL
AUX IN
MASTER OUT
MIDI IN
MIDI OUT
DC 9V
Electronic Drum
Connection Connecting a MIDI Device Transmit MIDI Data Use a MIDI cable to connect the MIDI OUT jack on the drum brain with the MIDI IN jack on the external MIDI device.
MIDI DATA
MIDI IN
MIDI OUT
Receive MIDI Data Use a MIDI cable to connect the MIDI IN jack on the drum brain with the MIDI OUT jack on the external MIDI device.
MIDI DATA
MIDI OUT
MIDI IN
Connecting a CD Player, etc. (AUX IN jack) The audio output from a CD player connected to the AUX IN jack on the rear panel can be mixed with the sound of the drum brain. This function is convenient when you want to play along with a favourite song. Use the AUX IN volume knob to adjust the volume of the external signal. CD player
AUX IN
10
Electronic Drum
Connecting an Amplifier When you want to listen to the voices with an amplifier, connect amplifiers to the MASTER OUT jack on the rear panel. Use the MASTER VOLUME knob to adjust the volume. MASTER OUT
AMPLIFIER
Connecting Headphone The headphone can be connected to the electronic drum. The headphone jack is located on the front of the module. Use the PHONE VOLUME knob to adjust the headphone volume.
PHONES JACK
Connecting the Power Supply Use the POWER switch located on the side of the module to turn off the electronic drum, then connect the power adaptor to the DC IN (9V 350mA) jack on the rear panel. DC 9V
11
Electronic Drum
Start to Play the Drum 1. Switch the Power On Make sure all the devices, pads and external devices are connected properly, then turn the power on. When the drum module can be operated, the text for selecting the drum kit will appear in the LED-display. POWER ON
OFF
2. Set the Main Volume While hitting a pad, gradually adjust the main volume to a comfortable volume level by turning master volume knob. VOLUME CONTROLS MASTER
MIN
MAX
PHONES
MIN
MAX
AUX IN
MIN
MAX
3. Enter and Return Enter Press [ENTER] button, enter the function which you select, save the parameters which you set. The content of the LED-display will return to the previous menu after saving.
ENTER
Return Press [ ] button, the content of LED-display will return to the previous menu, the current setting will not be saved. 4. Tempo Press the [TEMPO tempo value. Press the [TEMPO Range:020-240.
]or[TEMPO ]buttons, display shows the current ]or[TEMPO ]buttons to increase or decrease the tempo.
You also can turn the data dial to change the tempo. Press [TEMPO ] and [TEMPO tempo to default value.
] buttons at the same time to reset the
12
Electronic Drum
4.1 Tap Tempo Function This function allows you to set the song's tempo by tapping in tempo on a pad. Press [TEMPO ]or [TEMPO ] button. LED shows the tempo value.
TEMPO
Then press [ENTER] button, the tempo value is flashing. ENTER
Tap on the pad in the tempo that you want to get. Tap on the pad 4 times. Only the last two beats will be detected and set as your desired speed. 5. Select Drum Kits The unit comes with 25(NO.001-025) preset drum kits and 5 (NO.026-030) user kits. Press [KIT] button, the current kit number appears. EFFECT
KIT
PAD
CLICK
You can use the data dial or [+] and [-] buttons to select the kits which you want.
13
Electronic Drum
6. Kit In this function, you can change pad voices. Adjust volume of every voices in the kit. Set pad sensitivity, threshold, velocity curve, etc. You also can set effect(Reverb and Chorus) , copy current kit to user kit and lock the pad sensitivity, threshold or velocity curve. In kit mode , press [ENTER] button, LED shows
:
ENTER
You can use data dial or [+] and [-] buttons to select , .
,
6.1 Set Pad In kit mode ,press [ENTER] buttons, LED shows
:
ENTER
Then press [ENTER] again, to go into pad setting page. Use data dial or [+] and [-] buttons to select the pad you want to set. , , , , , , , , . You also can assign the pad by taping it hardly. 6.1.1 Hi-Hat Control The hi-hat tone changes smoothly from open to closed in response to press the pedal while hitting the hi-hat. There will be no sound produced if you completely press the pedal down softly and slowly. (Hi- Hat Control): Press [ENTER] button: ENTER
Use data dial or [+] and [-] button to select
14
,
.
Electronic Drum
6.1.1.1 Select Voice (Instrument) Press [ENTER], use data dial or [+] and [-] buttons to select voice that you want. To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode.
ENTER
Voice kit (var 1-var 6) Voice number Reference: voice list
In voice select mode, when you hit the pad the voice will change . Hit the pad until you reach the voice you desired. Press [START/STOP] button to listen to the current voice. 6.1.1.2 Hi-Hat Control Level (Level) Press [ENTER], use data dial or [+] and [-] buttons to set level value. Range: 000-032.To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode.
ENTER
6.1.2 Hi-Hat (Hi-Hat): Press [ENTER] button:
ENTER
15
Electronic Drum
Use data dial or [+] and [-] buttons to select , , .
,
,
,
6.1.2.1 Open Hi-Hat (Open Hi-Hat) Press [ENTER] button, use data dial or [+] and [-] buttons to select open Hi-Hat . To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode.
ENTER
Reference:6.1.1.1 Select voice
6.1.2.2 Close Hi-Hat (Close Hi-Hat) Press [ENTER] button, use data dial or [+] and [-] buttons to select close Hi-Hat . To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode.
ENTER
Reference:6.1.1.1 Select voice
6.1.2.3 Hi-Hat Level (Level) Press [ENTER] button, use data dial or [+] and [-] buttons to set level value. Range: 000-032. To confirm this selection, press [ENTER] again, and the content of LEDdisplay will return to the mode. ENTER
16
Electronic Drum
6.1.2.4 Pad Sensitivity (Sensitivity) Press [ENTER] button, use data dial or [+] and [-] buttons to set pad sensitivity. Range: 001-008.To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode. ENTER
When playing a kick trigger the beater can bounce back and hit the head a second time immediately after the intended note with acoustic drums sometimes the beater stays against the head this causes a single hit to double trigger (two sounds instead of one). The sensitivity setting helps to prevent this. When we set the sensitivity to a low value, it will be difficult to play very quickly. 6.1.2.5 Pad Threshold (Threshold) : Press [ENTER] button, use data dial or [+] and [-] button to set threshold. Range: 000-050. To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode. ENTER
This setting allows a trigger signal to be received only when the force struck on the pad is above a determined force level(velocity). This can be used to prevent a pad from sounding because of vibrations from other pads. When this value is too high, no sound is produced when the pad is struck lightly. 6.1.2.6 Pad Velocity Curve (Velocity Curve ) Press [ENTER] button, use data dial or [+] and [-] buttons to select 4 velocity curves(normal, easy, dynamic, fixed). To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode. Name
Description
Normal
Is defined as a curve which will be mid-way between the other two. Is defined as a curve which makes it easier to play loudly. The curve generates higher velocities for the same force. Is defined as a curve which makes it easier to play quietly. The curve generates lower velocities for the same force. Means that regardless of how hard you play, the pad will transmit a velocity value of 100.
Easy Dynamic Fixed
17
Electronic Drum
6.1.3 BD/Kick (Bass Drum) : Press [ENTER] button:
ENTER
Use data dial or [+] and [-] buttons to select , .
,
,
,
6.1.3.1 Select Voice (Instrument) Press [ENTER], use data dial or [+] and [-] buttons to select voice that you want. To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode. ENTER
Reference:6.1.1.1 Select voice
6.1.3.2 BD/Kick Level (Level) Press [ENTER] button, use data dial or [+] and [-] buttons to set level value. Range: 000-032. To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode.
ENTER
18
Electronic Drum
6.1.3.3 BD/Kick Sensitivity (Sensitivity) Press [ENTER] button, use data dial or [+] and [-] buttons to set pad sensitivity. Range: 001-008. Reference: 6.1.2.4 Pad Sensitivity. ENTER
6.1.3.4 BD/Kick Threshold (Threshold) Press [ENTER] button, use data dial or [+] and [-]] buttons to set threshold. Range: 000-050. Reference: 6.1.2.5 Pad Threshold.
ENTER
6.1.3.5 BD/Kick Velocity Curve (Velocity Curve) Press [ENTER] button, use data dial or [+] and [-] buttons to select 4 velocity curves (normal, easy, dynamic, fixed). Reference: 6.1.2.6 Pad Velocity Curve. ENTER
Note: (Snare), (High Tom), (Mid Tom), (Low Tom), (Crash Cymbal), and (Ride Cymbal), to set (Instrument), (Level), (Sensitivity), (Threshold), please see the details in 6.1.3 BD/Kick .
19
Electronic Drum
6.2 Effect In this function you can set reverb and chorus effect for drum kit. In kit mode, Press [ENTER] button Use data dial or [+] and [-] buttons to select ENTER
Press [ENTER] button, then use data dial or [+] and [-] buttons to select and . ENTER
6.2.1 Reverb (Reverb): Press [ENTER]: ENTER
Use data dial or [+] and [-] buttons to select (Reverb Level) .
(Reverb Type) and
6.2.1.1 Reverb Type (Reverb Type): Press [ENTER] button: ENTER
Use data dial or [+] and [-] buttons to select reverb type. (Room1, Room2, Room3, Hall1, Hall2, Plate, Delay, PanDelay). Reference: "Content of LED-display" on Page 31. To confirm this selection, press [ENTER] again, and the content of LEDdisplay will return to the mode. To close the reverb effect, please select
20
and press [ENTER] to confirm.
Electronic Drum
6.2.1.2 Reverb Level (Reverb Level): Press [ENTER] button: ENTER
Use data dial or [+] and [-] buttons to select reverb level. Range: 000-127. To confirm this selection, press [ENTER] again, and the content of LEDdisplay will return to the mode. 6.2.2 Chorus (Chorus): Press [ENTER]: ENTER
Use data dial or [+] and [-] buttons to select (Chorus Level) .
(Chorus Type)
and
6.2.2.1 Chorus Type (Chorus Type): Press [ENTER]: ENTER
Use data dial or [+] and [-] buttons to select chorus type.(Chorus1, Chorus2, Chorus3, Chorus4, Feedback, Flanger, ShortDly, FBDelay). Reference: "Content of LED-display" on Page 31. To close the chorus effect, please select . To confirm this selection, press [ENTER] again, and the content of LEDdisplay will return to the mode.
21
Electronic Drum
6.2.2.2 Chorus Level (Chorus Level): Press [ENTER]: ENTER
Use data dial or [+] and [-] buttons to select chorus level. Range: 000-127. To confirm this selection, press [ENTER] again, and the content of LEDdisplay will return to the mode. 6.3 Copy Drum Kit In this function you can copy drum kit to user kits. In kit mode, use data dial or [+] and [-] buttons to select kit. Reference: 4 Select Drum Kits . Then Press [ENTER] button, use data dial or [+] and [-] buttons to select ENTER
Press [ENTER], use data dial or [+] and [-] buttons to select user kits (NO.26-30) (copy- destination). Press [ENTER] to start the kit copy. 6.4 Trigger Follow Setting This function allows you to lock the current kit's sensitivity, threshold and velocity curve or not. In kit mode, use data dial or [+] and [-] buttons to select Press [ENTER] button, use data dial or [+] and [-] buttons to select or . 6.4.1 (Same) : To lock the current kit's sensitivity, threshold and velocity curve. Other kits will follow the current kit. Press [ENTER] button to confirm.
22
Electronic Drum
6.4.2 (Individual): In this mode, it cannot lock the current kit's sensitivity, threshold, and velocity settings. Other kits will not follow the current kit. ENTER
Press [ENTER] button to confirm. 7. Effect In this function you can set reverb and chorus effect for drum kit. Press [EFFECT] button, use data dial or [+] and [-] buttons to select and . EFFECT
KIT
PAD
CLICK
Press [ENTER] to confirm, use data dial or [+] and [-] buttons to set parameters. Reference: 6.2 Effect 8. Pad In this function, you can change pad voices. Adjust volume of every voices in the kit. Set pad sensitivity threshold velocity curve, etc. Press [PAD] button, use data dial or [+] and [-] buttons to select , , , , , , ,
, .
EFFECT
KIT
PAD
CLICK
Press [ENTER] to confirm, use data dial or [+] and [-] buttons to set parameters. Reference: 6.1 Set Pad
23
Electronic Drum
9. Click In CLICK mode, you can adjust the metronome level. Select time signatures and metronome sound. Press [CLICK] button to start metronome. To turn off the metronome, press the [CLICK] button again. Press [CLICK] button, use data dial or [+] and [-] buttons to select , , EFFECT
KIT
PAD
CLICK
9.1 Click Level (Level) : Press [ENTER] button, use data dial or [+] and [-] buttons to set level value. Range: 000-032. To confirm this selection, press [ENTER] again, and the content of LEDdisplay will return to the mode. ENTER
9.2 Time Signatures (Time Signatures) : Press [ENTER] button, use data dial or [+] and [-] buttons to select time signatures: 1/4 2/4 3/4 4/4 6/4 3/8 6/8 12/8. To confirm this selection, press [ENTER] again, and the content of LEDdisplay will return to the mode. ENTER
9.3 Click Sound (Click Sound) : Press [ENTER] button, use data dial or [+] and [-] buttons to select click sound:001-003. To confirm this selection, press [ENTER] again, and the content of LED-display will return to the mode. ENTER
24
Electronic Drum
9.4 Click Tempo To change the click tempo please see the dedails in Reference: 4 Tempo .
Tempo section.
10. Song TD90 provides 50(001-050) preset songs, and 2(d-1,d-2) demos. 10.1 Select a Song Press [SONG] button: DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
Use data dial or [+] and [-] buttons to select song. In song select mode, press [ENTER] button to adjust the song volume, Use data dial or [+] and [-] buttons to set it. Range: 000-032. 10.2 Start/Stop Playing the Song Press [START/STOP] button to start playing the song. Press [START/STOP] button again to stop playing. DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
10.3 Change the Song s Tempo To change the song s tempo, please see the dedails in Reference: 4 Tempo .
25
Tempo section.
Electronic Drum
11. Drum On/Off Press [DRUM ON/OFF] button, the main drum part of song will be muted. You can then play along with the song. DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
Press [DRUM ON/OFF] button again and the drum part will restore. 12. Start/Stop In SONG mode, press [START/STOP] to start or stop playing songs. DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
In [REC/PLAY] mode, press [START/STOP] to start or stop recording. DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
In voice select mode, the voice can be heard by pressing the [START/STOP] button.
26
Electronic Drum
13. Rec/Play TD90 allows you to record and playback your performance on the drum. The recording can contain 3 songs and only drum voices are allowed to record. Press [REC/PLAY] button enter record mode. DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
Use data dial or [+] and [-] buttons to select
,
,
13.1 Record (Record): Press [ENTER] Use data dial or [+] and [-] buttons to select song number: 001-003
ENTER
Note: You have to select time signatures and tempo before recording. Reference: 9.2 Time Signatures and 4Tempo . 13.2 Start Recording Press [START/STOP] button to start recording. The first measure is prompt for recording tempo. DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
27
.
Electronic Drum
13.3 Stop Recording Press [START/STOP] button again to stop recording.
DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
13.4 Play Song Press [REC/PLAY]button use data dial or [+] and [-]buttons to select DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
Press[ENTER] button use data dial or [+] and [-] buttons to select song number:001-003. Press [START/STOP] button to play the song. Press [START/STOP] button again to stop playing. 13.5 Delete Song Press [REC/PLAY] button, use dial data dial or [+] and [-] buttons to select
Press [ENTER] button, use data dial or [+] and [-]buttons to select song number that you want to delete:001-003 Press [ENTER] to delete the song.
28
.
Electronic Drum
14. Factory Set Turn off the power. Hold down [+] and [-] buttons, then turn the power on, it can restore all internalsettings to factory set. POWER ON
OFF
14.1 Restoring the Pad Settings In power on mode, hold down [+] and [-] buttons, then press [PAD] button. LED shows EFFECT
KIT
PAD
CLICK
14.2 Restoring the Effect Settings In power on mode, hold down [+] and [-] buttons, then press [EFFECT] button. LED shows EFFECT
KIT
PAD
CLICK
14.3 Restoring the Kit Settings In power on mode, hold down [+] and [-] buttons, then press [KIT] button. LED shows EFFECT
KIT
PAD
CLICK
To restore the kit settings, it also can restore the pad and effect settings at the same time.
29
Electronic Drum
14.4 Restoring the Click Settings In power on mode, hold down [+] and [-] buttons, then press [CLICK] button. LED shows
EFFECT
KIT
PAD
CLICK
14.5 Restoring the Record Settings In power on mode, hold down [+] and [-] buttons, then press [REC/PLAY] button. LED shows DRUM ON/OFF
REC/ PLAY
SONG
START/ STOP
All the recording data will be deleted.
30
Electronic Drum
Content of LED-Display Display
Interpret
Display
Interpret
Pad
Delay
Effect
Pan Delay
Copy
Chorus 1
Trigger
Chorus 2
Open Hi-Hat
Chorus 3
Close Hi-Hat
Chorus 4
Instrument
Feedback
Level
Flanger
Sensitivity
Short Delay
Threshold
Fb Delay
Velocity Curve
Bass Drum
Reverb
Snare
Chorus
High tom
Reverb Type
Mid tom
Reverb Level
Low tom
Chorus Type
Ride
Chorus Level
Crash
Time Signatures
Hi-Hat
Click Sound
Hi- Hat Control
Record
Normal
Play
Dynamic
Clear
Easy
Room 1
Fixed
Room 2
Reset
Room 3
Same
Hall 1
Individual
Hall 2
Demo 1
Plate
Demo 2
31
Electronic Drum
Drum Kits List
Kits No
Kits name
Kits No
Kits1
Standard -1
Kits14
Analog-1
Kits2
Standard -2
Kits15
Analog-2
Kits3
Dance-1
Kits16
Heavy Rock-1
Kits4
Dance-2
Kits17
Heavy Rock-2
Kits5
Dance-3
Kits18
Rockbank
Kits6
Jazz-1
Kits19
Rock
Kits7
Jazz-2
Kits20
Disco-1
Kits8
Room-1
Kits21
Disco-2
Kits9
Room-2
Kits22
Latin-1
Kits10
Electric-1
Kits23
Latin-2
Kits11
Electric-2
Kits24
Popreggae
Kits12
Brush-1
Kits25
Shortcut
Kits13
Brush-2
32
Kits name
Electronic Drum
Voice List Var 0 21-75 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Surdo Mute Surdo Open Hi Q Scratch Push Scratch Pull Finger Snap Click Noise Side Stick Hand Clap Ride Cymbal Cup Tambourine CowBell Vibraslap Bongo H Bongo L Conga H Mute Conga H Open Conga L Timbale H Timbale L Agogo H Agogo L Cabasa Maracas Samba Whistle H Samba Whistle L Cuiro Short Cuiro Long Claves Wood Block H Wood Block L
52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
Guica Mute Guica Open Triangle Mute Triangle Open Shaker Jingle Bell Bell Tree Seq Click L Seq Click H Brush Tap Brush Swirl L Brush Slap Brush Swirl H Snare Roll Castanet Snare L Sticks Bass Drum L Open Rim Shot Voice 'One' Voice 'Two' Voice 'Three' Metronome Bell Metronome Click
27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Bass Drum Analog Bass Drum Heavy Bass Drum Disco Bass Drum H BD Rock 1 Gran Casa Bass Drum L 1 Bass Drum Rock M BD Rock 2 HQ Elec Kick Jazz BD Bass Drum 1 Bass Drum 2 Bass Drum 3 Bass Drum 4 Bass Drum L 2 Concert BD BD Room BD Rock 3 BD Rock 4 BD Rock 5 BD Dance1 BD Dance2 Bass Drum L 3 Bass Drum L 4
Var 1 21-51 Var 2 21-51 21 22 23 24 25 26
Bass Drum Acoustic Bass Drum Dance Bass Drum Jazz Bass Drum Room Bass Drum Elec Bass Drum Brush
33
21 22 23 24 25
Snare Acoustic Snare Dance Snare Jazz Snare Room Snare Elec
Electronic Drum
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Snare Brush Snare Analog Snare Heavy Snare Disco Snare M Snare H SD Rock SD Jazz H Snare L Snare H Hard Snare Rock M Snare Gate L Snare Gate H Snare Analog M TR808 Snare Drum Snare Drum 1 Snare Drum 2 Snare Rim Studio Classic Snare Var Snare Rock 1 Snare Rock 2 ClascElec Snare Dance 1 Snare Dance 2
Var 3 21-74 21 22 23 24
Acoustic Tom H Acoustic Tom M Acoustic Tom L Jazz Tom H
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
Jazz Tom M Jazz Tom L TR808 Hi Tom TR808 Mid Tom TR808 Low Tom Disco Hi Tom Disco Mid Tom Disco Low Tom Floor Tom L Mid Tom L High Tom 1 Rock Tom 1 Rock Tom 2 Rock Tom 3 Floor Tom H Mid Tom H High Tom 2 Room Tom var 1 Room Tom var 2 Room Tom var 3 Room Tom var 4 Room Tom var 5 Room Tom var 6 Rock Tom var 1 Rock Tom var 2 Rock Tom var 3 Rock Tom var 4 Rock Tom var 5 Rock Tom var 6 Natural Tom 1 Natural Tom 2 Natural Tom 3 HQ Low Floor Tom
34
58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74
HQ High Floor Tom HQ Low Tom HQ Low-Mid Tom HQ Hi-Mid Tom HQ High Tom HQ Power Low Tom HQ Power Mid Tom HQ Power Hi Tom Analog Tom 1 Analog Tom 2 Analog Tom 3 Elec Tom 1 Elec Tom 2 Elec Tom 3 Elec Low Tom Elec Hi Tom 1 Elec Hi Tom 2
Var 4 21-51 21 22 23 24 25 26 27 28 29 30 31 32 33
Acoustic Cymbal Acoustic Ride Jazz Cymbal Disco Cymbal Heavy Ride Ride Cymbal 1 Crash Cymbal 1 Ride Cymbal 2 Hand Cym.H Closed Crash Cymbal 2 Ride Cymbal Cup Crash Cymbal 3 Ride Cymbal 3
Electronic Drum
34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Crash Cymbal 4 Ride Cymbal 4 Crash Cymbal 5 Ride Cymbal 5 TR808 Cymbal Cymbal Standard 1 Cymbal Bright Cymbal Standard 2 Soft Cymbal 1 Soft Cymbal 2 Soft Cymbal 3 Soft Cymbal 4 Ride Standard 1 Ride Standard 2 Ride Standard 3 Ride Standard 4 Ride Bell 1 Ride Bell 2
Var 5 21-53 21 22 23 24 25 26 27 28 29 30 31 32
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53
Hi-Hat Closed 1 Hi-Hat Pedal 1 Hi-Hat Open 1 Analog HH Closed Analog HH Pedal Analog HH Open Hi-Hat Closed 2 Hi-Hat Pedal 2 Hi-Hat Open 2 Hi-Hat Closed 3 Hi-Hat Pedal 3 Hi-Hat Open 3 TR808 HH Closed TR808 HH Pedal TR808 HH Open Hi-Hat Open 4 Hi-Hat Closed 4 Hi-Hat Closed 5 Hi-Hat Closed 6 Hi-Hat Closed 7 Classical Hi-Hat Open
Acoustic HH Close Acoustic HH Pedal Acoustic HH Open Dance HH Close Dance HH Pedal Dance HH Open Elec HH Close Elec HH Pedal Elec HH Open Heavy HH Close Heavy HH Pedal Heavy HH Open
35
Electronic Drum
Song List
STYLE NAME
NO
STYLE NAME
01
8BEAT MODERN
29
LATIN DISCO
02
MERSEY BEAT
30
DISCO
03
SURF POP
31
DISCO PARTY
04
8BEAT
32
DISCO FEVER
05
60'S ROCK
33
NewYork DISCO
06
HEAVY ROCK
34
BIG BAND FAST
07
ROCK SHUFFLE
35
BIG BAND MID
08
80'S ROCK
36
JAZZ CLUB
09
16 BEAT1
37
MODERN JAZZ
10
POP SHUFFLE
38
SOUL
11
GUITAR POP
39
RHYTHM&BLUES
12
JAZZ ROCK
40
BOOGIEWOOGIE
13
SWING FUNK
41
3/4 GOSPEL
14
POP ROCK
42
GOSPEL SHUFFLE
15
PIANO BALLAD
43
COUNTRY 8 BEAT
16
6/8 MODERN
44
POP BOSSA
17
POP BALLAD
45
REGGAE
18
16BEAT BALLAD
46
SWINGY REGGAE
19
RAP
47
ENGLISH WALTZ
20
DANCE POP
48
TANGO
21
HOUSE
49
JIVE
22
SWING HOUSE
50
2/4 POLKA
23
CLUB DANCE
24
CLUB LATIN
25
TECHNO
26
DANCE 8BEAT
27
CHILL OUT
28
70'S DISCO
No
36
Electronic Drum
MIDI Implementation Chart Function Basic Default Channel Changed Mode Default Messages Altered Note Number :True voice Velocity Note ON Note OFF Affter Key's Pitch Bender Control Change 0, 32 1 5 6 7 10 11 64 65 66 67 80, 81 91, 93 100,101 121
Transmitted 1-16CH 1-16CH Mode 3 X ********** 0~127 ********** O 9nH,v=1~127 O 8nH,v=0 X X O X X O O X X X X X X O O X X
Recognized 1-16CH 1-16CH Mode 3 X X 0~127 0~127 O 9nH,v=1~127 O 9nH,v=0 or 8nh X O O O O O O O O O O O O O O O (*1) O
Program Change : True System Exclusive System : Song Position : Song Select Common : Tune Aux : Local on/off : All Notes Off Messages : Active Sense : Reset
O 0-127 0-127 X X X X X O X X
O 0-127 0-127 X X X X O O O O
Mode1:OMNI ON, POLY Mode3:OMNI OFF, POLY
37
Remarks
Bank Select Modulation Portamento time Data Entry Volume Pan Expression Sustain Portamento Sostenuto Soft pedal DSP TYPE DSP DEPTH RPN LSB,MSB Reset all Controllers
Mode2:OMNI ON, MONO Mode4:OMNI OFF, MONO
O: Yes X: NO
Electronic Drum
Specifications
Drum Pad:
4 Drum Pads, 2 Cymbal Pads, 1 Hi-Hat, 1 Kick Trigger
Voices:
235 Voices
Drum Kits:
25 Preset Kits, 5 User Kits
Song:
50 Preset Songs, and 2 Demos.
Effect:
Reverb, Chorus.
Controls:
Power Switch, Start/Stop, Effect, Rec/Play, Drum On/Off, Click, Song, Pad, Kit, Tempo+/- , Enter, Return.
Display:
LED Display
Connections: Master Out, AUX In, DC In, MIDI In, MIDI Out, HH-Ctrl, Hi-Hat, Crash, Ride, Snare, Tom 1, Tom 2, Tom 3, BD Kick Power Supply: DC 9V 350mA
38
10505409 V4.0
