Transcript
DC Laptops & Flat Panel Carts
User’s Guide
5.0
Please read all parts of this guide. When set-up is complete, do not discard guide. Please file guide in secure place for future reference. Important: Please refer to the Quick Reference Setup Guide for proper charging of the DC Carts.
1. Inspection of Cart
Upon receipt of shipment, carts should be inspected carefully. Damage claims are the responsibility of the receiver and must be noted on the delivery receipt. Midmark’ responsibility ceases when the receiver signs the bill of lading as having received in good condition. The reporting of any damage / freight claims must be made within 72 hours of received and signed for shipment.
Power System Battery Indicator Lights/Gauge
1
2
6
2. Adjusting the Cart Height
3 1. Adjust the height of cart by pressing hand lever. 2. Pull up or push down on handles for desired height.
4
5
3. Locking/Unlocking of Rollerblade Wheels
1. Fuel Gauge: Show the true state of charge of battery
Hold cart by handles. Lift the wheel lock with your foot until the lock releases or until you hear a click.
4. Using the Cart
Once the height of the cart has been adjusted to a comfortable position, explore the Elite Multi-use Surface:
Plug-in system to AC outlet. The charging indicator on the fuel gauge will flash while charging and will turn off when battery is fully charged. The average time for the battery to reach full load (or full charge) is 5-6 hours.
2. Low Battery Indicator: “Amber” Light indicates that
the battery has been discharged to within 20 minutes of
safe discharge level.
3. Power Source: “Green” light indicates AC or DC Power 4. Charge Status: “Blinking Green” light indicates battery
is charging. “No light” indicates battery is fully charged.
5. Recovery: “Amber” light indicates the battery was over
discharged and system is in auto-recovery mode.
6. Auto Shutdown: “Steady Amber” light indicates that the
system will perform window shutdown.
Note: Battery life is maximized when fully charged at least once a week. Midmark Corporation I 60 Vista Drive | Versailles, OH 45380-0286 | T: 1.800.MIDMARK I www.midmark.com | MMDCUG09B
DC Laptops & Flat Panel Carts
DC Power Software5.0 Please read all parts of this guide. When set-up is complete, do not discard guide. Please file guide in secure place for future reference. Important: Please refer to the Quick Reference Setup Guide for proper charging of the DC Carts.
1
Benefits - Life Cycle Management Helps prevent deep discharging, which helps you maximize the battery cycle life and minimizes battery replacement cost.
2
• Advanced Funchtion Screen to view alll system diagnostics.
Power System Management • Displayed battery performance • Event Logging provides a sequence of events experienced by the power system. Events displayed are battery state of health, low battery, shut down.
• Automatic orderly Windows shutdown prevents over discharge of battery and loss of critical data. • Windows XP compatible
3 Tech Specs • Series 301 Software (Rev. 5.0) • Email notifications can be preset to send to multiple recipients when alert arises.
• Cart compatability: DC software is compatible with all DC carts. Minimum PC Configuration • Operating System: Windows 2000 + Service Pack 3 Recommende PC Configuration: • Operating System: Windows XP + Service Pack 2 • System Memory: 80K • Hard Disk (free space): 15MB • Screen Resolution: High Resolution 1280+ • Port Availability: USB 2.0
• Graphic Users Interface enables the user to view the true state (health) of battery).
Midmark Corporation I 60 Vista Drive | Versailles, OH 45380-0286 | T: 1.800.MIDMARK I www.midmark.com | MMDCUG09B
DC Laptops & Flat Panel Carts
User’s Guide
5.0
Please read all parts of this guide. When set-up is complete, do not discard guide. Please file guide in secure place for future reference. Important: Please refer to the Quick Reference Setup Guide for proper charging of the DC Carts.
4. Using the Cart
Once the height of the cart has been adjusted to a comfortable position, explore the many cart options:
Laptop Lock w/ Key (if equipped)
Flat Screen Monitor Arm (FSA) (if equipped)
Slim-Line CPU Holder (CPU2) (if equipped)
Insert CPU. Tighten with Security Straps.
To use: 1. Unlock cable 2. Pull cable out from bottom of lock housing. 3. Lift cable upwards on top and insert laptop. 4. Lift cable downwards against laptop and position cable as required. 5. Rotate knob clockwise to tighten cable 6. When cable is securely tightened, keep tension on knob and turn key to lock. Adjustable Upper Surface (if equipped)
Unlock. Slide surface back. Adjust and set height (3 adjustment settings) Cable Management (if equipped)
To adjust height of monitor, loosen knob find desired position and tighten knob. 4d. Electronic Keyless Lock System (optional) To open, enter code (2244), turn lever to unlocked position. To lock, turn lever to locked position. To change the combination please refer to the Codelocks Cabinet Lock Programming & Operating Instructions.
locked
unlocked
Swing A Mouse (SAM2) (if equipped)
Midmark Corporation I 60 Vista Drive | Versailles, OH 45380-0286 | T: 1.800.MIDMARK I www.midmark.com | MMDCUG09B
