Transcript
Evado
EN
USER’S GUIDE WARRANTY CARD
EN SAFETY INSTRUCTIONS For the sake of your child’s safety, read this instruction carefully and keep for future reference. Your child’s safety may be affected if the recommendations of this instruction are not applied. Before use, all locks should be removed. Universal stroller is designed for children from 0 to 36 months, up to 15 maximum weight. Warning: Never leave a child unattended! Warning: Do not carry more than one child in the stroller! Important: This stroller is designed to carry one child only.
840
840
Use the safety harness when a child can sit unaided. Do not add a mattress thicker than 25mm. This item is suitable for a child, who cannot sit by itself, turn and climb using his own hands and knees. Maximum child’s weight is 9kg.
Always use the safety harness.
Before use the stroller, check that the carrycot, seat and car seat are correctly fixed to the item.
CAUTION: 1. The stroller cannot be used if any element is damaged. 2. Before installation check that the item and all elements are ready to use. If not, the item should not be used.
3. During folding and unfolding the stroller, make sure that a child is kept away. 4. When making adjustments pay attention, that moving parts of the stroller are not in contact with a child’s body. 5. During each stop, loading and unloading a child, it is necessary to use the brake. 6. In the stroller, original parts approved by the manufacturer, shall be used. Important: Any additional equipment which is not listed by the manufacturer shall not be used. 7. Moving to the curb or any other step, the front suspension should be lifted up. Strong strike the barrier may cause the inflexion of the structure. 8. It is not allowed to use the stroller on stairs. Carrying a child in the stroller on stairs is dangerous. 9. It is not allowed to carry the stroller by holding handle and barrier or canopy. The stroller should be carried by holding its sides. 10. The stroller should be stored in a place not available for children. 11. When the stroller is not longer in use, the brakes should be engaged. 12. Check regularly if all parts of the stroller are safe and working properly. 13. Never use a force to adjust the moving parts of the stroller to the right position. Make sure if nothing blocks the move and then try again. Warning: When making adjustments of moving parts of the stroller, an optimum safety for a child should be ensured. Warning: The stroller is not suitable for driving up the stairs, skating and running. Warning: Always use a parking brake when the stroller is not in use. Warning: Leaving a child unattended in the stroller may pose a danger. Warning: Before use the stroller, make sure that folding mechanisms are locked. Warning: Do not use any additional mattress. Warning: Use a harness when a child can sit unaided. Warning: The stroller seat is not suitable for children under 6 months. Warning: Any load attached to the handle affects the stability of the stroller. Important: Only service bag added to the stroller can be attached to the handle. The maximum weight is 2kg. Any excessive load attached to the handle may affect the stabil-
ity of the stroller. Warning: Always use the crotch strap in combination with the waist belt. Warning: This product is not suitable for running or skating. Warning: Never leave the stroller with a child on the ramp surface, even if the brake is locked. Warning: Always lock the brake when loading and unloading a child. Warning: Small elements, such as the caps protecting axles may be swallowed by a child. Warning: Do not leave the stroller with a child near to pool, stairs and fire. Warning: Keep plastic packaging materials out of reach of a child to avoid the danger of asphyxiation. Warning: The maximum weight for the basket is 2kg.
(fig. 4) or move the lever up and holding, pull up the levers, located to the both sides of handle (rys. 5). Warning: Before unfolding the frame, dismount the carrycot/seat/front wheels. THE HANDLE HEIGHT ADJUSTMENT The height of the handle can be adjusted to the height of the person, who leads the stroller. To adjust the handle height, press the buttons, located to the both sides of the handle, at the same time, and then, still holding, make the adjustment (fig. 6) MOUNTING AND DISMOUNTING OF THE REAR WHEELS
To mount the rear wheels, press the metal button in the center of the rim (fig. 8) and then slide the wheel till the end, release the button and slightly pull back to the moment 1. Hand wash in a cold water, of the lock. 2. Do not bleach, To dismount the rear wheels, press the metal 3. Do not tumble dry, button in the center of the rim and, still hold4. Do not iron, ing pull the wheel off the axis. 5. Do not dry clean Warning: Before use the stroller, make sure - The stroller’s seat can be cleaned with a that both wheels are correctly mounted. damp sponge or cloth, with a mild detergent, - Stroller’s upholstery should not be removed. MOUNTING AND DISMOUNTING OF THE - After the stroller become wet, it should be FRONT WHEELS dry. - The wheels should be controlled and clean To put the front wheel, slide the wheel axle from the dust and sand. into the wheel socket until it clicks into place - Wheel axles should be conserved by put (fig. 9). between the axle and hub, a few drops of Warning: Before use the stroller, make sure machine oil. that both wheels are correctly mounted. - Sunshine can change the colors of the mate- To dismount the front wheel, press and hold rials and fabrics. the plastic or metal button on the socket of the wheel and slide the front wheel out of the socket (fig. 10). USER’S GUIDE FRONT SWIVEL WHEELS CARE AND MAINTENANCE
Folding and unfolding the frame To unfold the frame, put it flat (fig. 1), then holding the handle, lift up (fig. 2) until the folding mechanisms lock (fig. 3). Warning: Before use the stroller, make sure that folding mechanism is locked. To fold the frame, press the red button of additional lock, located at the top of the handle
The stroller has the system of front swivel wheels with the possibility of stationary wheels. To engage stationary wheels to driving straight, press the red click on the top of the socket of the wheel. To release the lock, pull up the click (fig. 11).
THE PARKING BRAKE
THE CARRYCOT HOOD
The stroller features a parking brake, locking both wheels. To engage a parking brake, push the pedal down with your foot. A parking brake release follows by picking its bar up (fig. 12). Warning: Never leave the stroller with a child on the ramp surface, even if the brake is engaged. Warning: Never use the stroller with a parking brake engaged.
The carrycot features a permanently mounted hood. To change its position, press the buttons on the both sides of the hood at the same time and choose the appropriate angle (fig. 16). The hood is mounted to the top of the carrycot with the zipper. The hood features the holder to move the carrycot and rain canopy folded inside.
AMORTIZATION
THE CARRYCOT COVER
The carrycot features a cover, which is mountThe stroller features a spring amortization, ed by pinning snaps to snaps located on the which the hardness can be adjusted using a both sides of the hood (fig. 18) special switch (fig. 13). MOUNTING AND DISMOUNTING THE SEAT THE PUMPED WHEELS Warning: Before use the stroller, make sure The stroller is available with the pumped that the seat is correctly mounted and locked wheels. The maximum allowed wheel pres- on the both sides of the stroller. sure is 0,5 bar. Warning: Do not unfold the frame, when the seat is mounted. MOUNTING AND DISMOUNTING The seat can be mounted on the frame forward THE CARRYCOT facing or parent facing. Warning: Before use the stroller, make sure the carrycot is correctly mounted and locked on both sides of the stroller. Warning: Do not unfold the frame, when the carrycot is mounted. The carrycot can be mounted forward facing or parent facing. To mount the carrycot on the frame, slide into the assembly sockets on the both sides of the frame, until it clicks into place.
To mount the seat on the frame, plug the mounting brackets into sockets on the both sides of the stroller (19a). It locks automatically. To dismount the seat, hold the mounting brackets on the both sides of the stroller, press the oblong buttons located there, and holding, pull the seat up (19b).
THE CARRYCOT ADJUSTMENT
The backrest is regulated in 4 positions. Raising up by lifting up to the desired position (fig. 22). To pull down, pull the hand from the back of the seat and set the desired position (fig. 23). Warning: During the backrest adjustment pay attention to child’s hands and head.
The mechanism of the carrycot adjustment is located under the carrycot, from the side of the canopy. To lift up the backrest, turn the mechanism left, to pull down, turn the mechanism right (fig. 15a). The mechanism of the carrycot adjustment is located under the mattress. To lift up the backrest, pull up the mechanism and set in the desired position. To pull down the backrest, pull up and hold the handle and set the desired position (fig. 15b).
THE BACKREST ADJUSTMENT
THE CANOPY The seat features the removable canopy. To mount the canopy, slide the brackets into the designated holders on the both sides of the seat (fig. 24). To dismount the canopy, press the brackets on the both sides of the seat and pull out from the sockets (fig. 25).
THE CANOPY ADJUSTMENT
THE ACCESSORY BAG
To change the position of the canopy pull up The stroller features the accessory bag. To mount the accessory bag fasten it on the hanthe hoop forward or backward (fig. 27). dle using the naps or clips (fig. 41). THE COVER SEAT The car seat The seat features the cover, which is mounted by pinning its snaps to snaps located on the Warning: To mount the car seat on the stroller, both sides of the canopy (fig. 29). plug the special adapters into the sockets of the stroller. THE FOOTWELL Warning: Before mounting, make sure that the special adapter is correctly mounted on The footwell features the height adjustment. the frame of the stroller. To pull up the footwell, to raise the footwell Warning: The car seat is intended for the chilpull it up. To lower the footwell, press and hold dren up to 11kg. the buttons on the both sides of the footwell at the same time and set the desired position MOUNTING AND DISMOUNTING THE ADAPT(fig. 30). ERS OF THE CAR SEAT THE BUMPER BAR
Place the adapter into the sockets on the both sides of the stroller, until it clicks into place The seat features the bumper bar. To mount (fig. 43). the bumper bar, slide the brackets into des- The dismount of the adapter is the same acignated sockets on the both sides of the seat tions as the dismount of the carrycot. (fig. 31). To remove the bumper bar, press the red buttons located on the external side of the MOUNTING AND DISMOUNTING seat and pull it out from the sockets. THE CAR SEAT Warning: Always use the bumper bar in connection with the crotch strap, when a child is To mount the car seat, lock it into the sockets in the seat. of the adapters (fig. 45). To dismount the car seat, pull the levers on SAFETY HARNESS the both sides of the car seat and pull it out (fig. 45). Warning: Always use the safety harness when Warning: Before use, make sure the car seat is a child is in the seat. correctly attached. The stroller features the 5-point safety harness. When a child is in the seat, fasten the THE HANDLE OF THE CAR SEAT ADJUSTMENT safety harness by pushing its forks into the center buckle (fig. 37), then slide the harness The regulation is made by pressing the red in buckles. To unbuckle the safety harness buttons on the both sides of the car seat, and push the fork and pull out from the center then sliding the handle to the desired position buckle. (fig. 49). THE SHOPPING BASKET To mount the shopping basket, fix it into the down part of the frame using the zippers. Warning: The maximum weight of the shopping basket is 2kg.
The more detailed instruction of the car seat mounting in the car, is attached to the car seat.
1. 2. 3.
The date to bring into service
Repair date
Product’s name
Production date
ul. Strażacka 3 42-125 Łobodno, Poland tel./fax +48 34 319 51 26 mobile +48 605 280 458 e-mail:
[email protected] skype: wiejar.pl www.wiejar.pl, www.wiejar.com
P.P.H.U. „WIEJAR”
Technician’s signature
Warranty Card
Description of the repair
Seller’s stamp and signature
Warranty Conditions: 1. The WIEJAR company assures the user with the good quality of the product, on which this Warranty Card is issued. 2. The warranty is valid in Poland. 3. The warranty period lasts 12 months and is counted from the date of the product’s purchase. 4. The product shall be mounted and used according to User’s Guide. 5. The load cannot exceed: in the case of the stroller – 15kg, in the case of the twin-stroller – 30kg, in the case of the car seat – 13kg, in the case of the carrycot – 8kg, in the case of bag on the hand – 1,5kg. 6. The warranty does not cover damages caused by improper and inconsistent with the User’s Guide or own modifications. In the case of the above, the purchaser losts its warranty rights. 7. Defects and damages covered by the warranty, detected during the warranty period, should be submitted at the place of purchase or directly at the producer. 8. The defective product should be clean, before return for repair. 9. The warranty period is extended by the time of repair, counted from the date, when the product was submitted to for repair till the date when the product was fixed. 10. In the case of warranty lost, the duplicates will not be issued. 11. The producer is not responsible for the textile damages, caused by sunlight. 12. Copies of the Warranty Card are not valid.
Purchase date