Transcript
HAS-RB01
Projector Apple TV® Mounting Bracket
Model name
HAS-RB01
User’s Manual
Thank you for purchasing this bracket for the Hitachi projector Apple TV®. This product is a bracket for Hitachi projectors only. For details on the supported models, contact your local Hitachi dealer or servicing company. Before using this product, be sure to carefully read and fully understand the information in this manual and the User's Manual for Apple TV®, the projector, and the wall mount unit. After reading this manual, keep it in a safe place for future reference.
Disclaimer
● T he content of this manual and the specifications of the product it describes are subject to change without prior notice. ● Note that Hitachi will accept no liability whatsoever for injuries and damages arising from incorrect use or handling that exceeds normal operating limits.
Table of Contents Disclaimer................................................. 1 Table of Contents...................................... 1 Safety Symbols......................................... 1 To the customer........................................ 2
To service personnel................................ 2 Contents of this package......................... 2 Assembly Procedure ............................ 3,4 Notes on Remote Control Operation ...... 5
Safety Symbols The following symbols are used in this manual to help you use this product safely and correctly, and to prevent injury to yourself and others or damage to property. Read through the safety instructions below so you can operate the product correctly.
WARNING
This symbol indicates information that, if ignored, could result in serious personal injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that, if ignored, could result in personal injury or physical damage due to incorrect handling.
Indicates a prohibited action. This symbol is accompanied by text indicating an action that must not be taken.
Indicates a mandatory action. This symbol is accompanied by text indicating an action that must be taken.
1
HAS-RB01
WARNING To the customer ■ Do not attempt to install the bracket yourself. Be sure to always request installation by your dealer or service company. Hitachi will not be liable for any accidents or injuries that occur due to improper installation or improper usage of this device. ■ For other warning information, see the User's Manual for the Hitachi projector, wall mount unit, and Apple TV®.
To service personnel ■ Perform all installation work correctly according to this manual. Make sure that all specified screws and brackets are used in the installation. ■ For other warning information, see the User's Manual for the Hitachi projector, wall mount unit, and Apple TV®.
Contents of this package Check that the items listed in the table below are included in this package. If any are missing, please contact your dealer immediately. (The fasteners (screws, etc.) required for wall mounting are not supplied with the wall mount unit. Select fasteners that suit the structure of the wall to ensure they will properly support the projector and the wall mount unit.) Part names in the figures on the following pages are indicated by the symbols given in the table below. Symbol Part name Quantity
Appearance
Symbol
Part name
Quantity
A
Bracket (A)
1
D
M3×8 Decorative screw
1
B
Bracket (B)
1
E
User’s Manual (This book)
1
C
M3 × 8 hexagon head screws
2
Appearance
Apple TV® is a registered trademark of Apple.Ink in the United States and other countries. WARNING Use in an ambient temperature range from 0°C to 30°C.
2
Assembly Procedure
HAS-RB01
①Loosen the two adjusters of the projector. Next, insert the two X sections (long holes) of the bracket (B) so that they fit between the two projector adjusters and spacers. If any of the adjusters or spacers are missing, order them from the projector replacement parts.
X
Adjuster
Spacer
X
②Tighten the two adjusters to secure the bracket (B) in place. Tightening torque: 0.98 N·m (10 kgf·cm) ③Tighten the M3×8 decorative screw (D) to secure it in place. Tightening torque: 0.98 N·m (10 kgf·cm)
Adjuster M3×8 Decorative screw (D) ® ④As shown in the figure, place the Apple TV on top of the bracket (B). When setting in place, pay careful attention to the vertical direction of the Apple TV® and the orientation of the connector. The cables must be obtained and connected by the customer.
Top surface side
Connector side
Apple TV®
3
HAS-RB01
Assembly Procedure (continued)
⑤Insert the catches (Y1) and (Y2) of the bracket (A) into the mounting holes (Z1) and (Z2) of the bracket (B). Bracket (A)
(Y1)
(Y2)
(Z2) (Z1)
Bracket (B)
⑥Secure in place using the two M3×8 hex screws (C). Tightening torque: 0.98 N·m (10 kgf·cm) ⑦Connect the required cables.
M3 × 8 hexagon head screws (C) (2 locations)
4
HAS-RB01
Notes on Remote Control Operation
Direction where remote control sensor is located
Screen
Use the remote control from a high position on the screen right side.
The remote control sensor of Apple TV® is located on the right side facing the screen, and the remote control may not function properly if used from the front side, left side, or bottom side. If the remote control is not functioning properly, use from a high position on the screen right side. Also, even if used from the right side, the remote control has a narrow operating range, and so use it carefully.
5
