Preview only show first 10 pages with watermark. For full document please download

User's Manual Stationary Mount For Tablet Pc Arkon Tab-fsm (044)361-05-06 Icq:495-089-192

   EMBED


Share

Transcript

(044)361-05-06 ICQ:495-089-192 (067)469-02-12 ICQ:613-211-859 (099)048-99-03 (093)672-77-76 User's Manual Stationary mount for Tablet PC Arkon TAB-FSM In the online store Winauto you also can buy стаціонарне кріплення для планшетного ПК аркон Arkon TAB-FSM. Delivery in Kyiv and throughout Ukraine with payment upon receipt! winauto.ua Sale - Car Receivers - Facia Plates - Head Units - Car TVs and Monitors - Antennas - Car Audio - DVR - GPS Navigation - Trip Computers - Car Alarm Systems - Mechanical Locking - Parking Systems - Car Cameras - Xenon and Lights - Established Optics - Tuning - Car Heating and Cooling Sound Marine and Electronics - Car Accessories - Isolation - Installation Components - Batteries, Power - Oils and Fluids - Интернет-магазин автозвука и автотоваров Винавто TAB-FSM | Flexible Universal Tablet Seat Bolt or Floor Mount Package Contents: (1) TAB001 - Universal Tablet Holder with (4) regular legs, (2) long legs (1) GN088-SBH - 18.5” Flexible aluminum floor or console mount Includes: (1) Seat Bolt Bracket, (1) Floor / Console Bracket, (4) Screws Flexible Floor Mount Arm ! Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road. Universal Tablet Holder 1 Passenger Seat Bolt Mounting B A For an easy installation using basic tools, install using the passenger seat track bolt. Mount Base Mount Base to .u a Step 1. With a socket wrench, loosen the passenger seat track bolt, insert the seat track bolt bracket, and retighten the seat track bolt. Floor Bracket w Note: If your seat track bolt is angled sideways, you may need to remove and realign the seat bolt bracket on the end of the mounting arm. in au 2 1 Attach Holder to Floor Mount Pedestal Adjust the position of the floor mount arm by grasping with both hands and gently bending. The end of the floor mount slides into the back of the holder. Depress the catch release lever and slide the mount toward the lever when you wish to remove the holder from the mounting arm. Catch Release Lever Tightening Ring Alternative Floor or Console Mounting For a more permanent mount, connect the floor / console mount bracket to the floor or console. This will require drilling into your vehicle’s interior surface. ! Drilling into the dash, floor, or console could damage your vehicle. Use caution and consult a mobile install professional to avoid damaging sensitive vehicle components. Fig. A Screw the mount bracket to the mount. Depending on your vehicle, you may need to change the orientation of the bracket. Fig. B Attach the Floor / Console Bracket with screws. ! Floor Bracket Rev. 082411 Safety Precautions Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and / or air bag deployment. Arkon is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this pedestal mount. Floor Mount 3 Loading the Tablet While securing holder with one hand, press the tablet down on the lower holder legs which are spring loaded. Slide the top of the device under the top support legs and gently release pressure for a snug fit. If necessary, you can use the different size legs provided. The Mobile Mounting Specialists™ Consumer Hotline: USA (800) 841-0884 INT’L (626) 254-9005 Monday - Friday 9 am - 5 pm, PST www.arkon.com Arcadia, CA 91006 USA Designed in USA | Made in Taiwan © Copyright 2011 Arkon Resources, Inc.