Preview only show first 10 pages with watermark. For full document please download

Using The M1-da Dvi Digital Computer Cable With Usb

   EMBED

Share

Transcript

Using the M1-DA DVI digital computer cable with USB SP-DVI-D The M1-DA digital computer cable allows you to connect an InFocus digital projector to a computer that has Digital Video Interface (DVI). This cable is compatible only with digitally enabled projectors. With the digital cable connected, you can project crystal clear computer images, DVD movies, as well as the Internet from your computer. To connect the M1-DA digital computer cable The cable has three connectors in a "Y" configuration. There is an M1 connector at one end that plugs into the connector on the projector. At the other end is a DVI connector that connects to the computer, as well as a USB connector for computer mouse control via the projector remote. Laptop or desktop computer with Digital Visual Interface Digital InFocus projector USB port in in DVI connector USB connector for optional USB mouse control. M1 connector M1-DA DVI digital computer cable Special Note If your computer uses a Matrox video card, be sure that it has software version 5.52 or higher installed on it. You may damage the Matrox card when you use this digital computer cable if the card uses an earlier version of software. To check what type of video card and software version you have in your computer, click Display in the Control Panels, then click the Settings tab. Click Advanced, then click the Adaptor tab. You can download software updates from the Matrox web site at www.matrox.com. 009-0520-00 009-0520-00 © 2000 InFocus Systems, Inc. Printed in the U.S.A.