Preview only show first 10 pages with watermark. For full document please download

Using The Remote Control Unit

   EMBED

Share

Transcript

Getting started English Using the remote control unit Español Portugés You can operate the unit with the remote control unit, and you can also operate your TV or other components with the remote control unit. Chinese To use the remote control unit for TV operation You can operate a JVC TV with the remote control unit. To operate another manufacture’s TV, you have to change the remote control signal. Also refer to the manual supplied with your TV. Manufacturer code list No. Manufacturer 01 JVC 02 PANASONIC 03 SONY 04 SHARP 05 TOSHIBA 06 MITSUBISHI DVD TV KARAOKE 1 Set 2 Press and hold TV Do not release TV TV /I TV /I HITACHI 08 SANYO 09 FUNAI 10 AIWA 11 DAEWOO 12 SAMSUNG 13 LG (GOLDSTAR) 15 FERGUSON 16 PHILIPS 17 GRUNDIG 18 ITT 19 MIVER 20 FINLUX 21 NOKIA 22 NEC 23 JINXING/PEONY1 24 PEONY2 25 PEONY3 26 KONKA 27 PEWIN/NOBLEX 28 TCL /I until the next step is completed. 4 Release 0 to 9 . . The following buttons can be used for operating the TV: TV Turns the TV on or off. /I + – Change the TV channels. TV DVD KARAOKE set to TV only) (with + Adjusts the TV volume. TV – 0 to 9 CANCEL TV/VIDEO THOMSON , then press SET . TV . Keep holding Holding , enter the manufacturer’s code (two digits) using See the lists on the left to find the manufacturer’s code. VOLUME 14 /I /I 3 CH 07 on the remote control unit to TV. Getting started Changing the remote control signal 5 Selects the TV channels. TV DVD KARAOKE set to TV only) (with You can switch input mode (either TV or VIDEO). TV DVD KARAOKE set to TV only) (with TV /I Try to operate your TV by pressing . If your TV turns on or off, you have entered the correct code. NOTE ¶ If there is more than one code listed for your brand of TV, try each one until the correct one is entered. 23