Transcript
USL
50X GPS Beacon with Synchronized Flasher Module
3195 Vickery Rd. North Syracuse NY 13212 | (315) 699 4400 | Unimar.com
Application
Certified to:
Compliant to:
FAA AC No. 150/5345-43F
ICAO Annex 14, 4th Ed., July 2004
FAA Engineering Brief No. 67
ICAO Aerodromes Design Manual, Chapter
Intertek ETL
18
General
The LED Beacon with GPS technology, when utilized with multiple SFM’s (Synchronized Flashing Modules), provides the synchronized flashing function (proper sequence of ON / OFF time) for multiple LED beacons or LED obstruction lights. NOTE: Our L864 LED Beacon provides the most focused beam meeting FAA requirements.
The Unimar GPS controlled beacon provides synchronized flashing of multiple units in wind farms and other applications. The Unimar GPS controlled beacon not only provides the synchronized flashing function but also the following alarm monitoring with LED status indicators: Beacon failure Loss of GPS pulse signal Photocell failure Loss of power The monitoring, flashing, synchronization and alarm functions are integrated into one solid state module. This module is mounted in the base of the beacon, protecting the device from heat, sun and UV rays. With a good GPS signal, beacon synchronization is maintained whenever power is applied to the controller. The output to the LED beacon is controlled by the internal Photo-Control. Additional features include GPS signal monitoring, an option switch for selectable flashrate and option switch for photocell monitoring.
System Specifications Power Source: Flash Rate: Power Consumption: Operating Temp:
120-240 VAC, 50/60 Hz; Switch Selectable 30, 40 or 60 (± 1%) flashes per minute (switch selectable); (½ ON and ½ OFF) 20 Watts -40° F to +131° F (-40° C to +55° C)
USL_GPS_Beacon_50X_gen5130716
USL
50X GPS Beacon with Synchronized Flasher Module
3195 Vickery Rd. North Syracuse NY 13212 | (315) 699 4400 | Unimar.com
Integrated Beacon Components Miniature 3V GPS Antenna Compact GPS Antenna with magnetic mounting - Installed within the beacon.
Monitoring, Alarm & GPS Module Consists of solid-state components conformal coated to protect against shock, vibration and humidity Installed within the beacon.
Ordering Information System Part Number USL50X
Description
Voltage
Beacon with Integrated GPS; Monitoring
120-240 VAC; 50/60 Hz
Installation and Connection to Power Source 1. Run power/alarm cable directly to beacon. 2. Make power and alarm connections. (See wiring diagram.) 3. Ensure beacon base is grounded to structure.
5 conductor wiring available
BEACON WARRANTY: Limited 5 year warranty USL_GPS_Beacon_50X_gen5130716
