Transcript
Takes the donkey work out of fitting additional CCTV cameras !
Send 4 Video signals down 1 Co-ax cable
...with a Mule4 Even aud & data! io
4
o
MULE
In
CCTV
1x
V x 4
5 RG
O
9
T U
e d i
* as per instructions
• 12V DC • Up to 4 videos down co-ax* • Data combiner*
• Audio transmission* • Up to 200mtrs* • Easy to setup
The CCTV Mule makes it easy to add extra cameras to existing installations, you save installation time and reduce the cost of buying and installing more cable.
The Mules work in pairs. One Mule combines the video signals to transmit them down 1 single co-ax, the other Mule then reconstructs the individual video signals at the remote end. A low-cost, easy solution that offers huge installation benefits and opportunities to add extra cameras.
The clever electronics of the CCTV Mule also allow it to carry audio and RS485 data along the same co-axial cable. You can even carry three video signals in one direction and a fourth signal in the other direction!
The CCTV Mules need a 12V power supply at both ends but other than that, it’s a really simple device to use, with no real configuration to do.
Mule4 Spec
Voltage - 12V DC, Tx 200mA, Rx 350mA Video inputs - 4, outputs - 1 Tx Video inputs - 1, outputs - 4 Rx Video quality D1 @ 25fps - Every Camera Gain control for different cable lengths Operation modes - 5 types Cable required – RG59 or better Max Cable length – 200mtrs Size – 175 x 110 x 30mm
Order Code
MULE004
Description
Mule 4, Tx & Rx Units
Also available in 2 way Code: MULE002
It’s the easy way to add extra cameras to an existing installation!
wwFor w. mor cc e i tvm nf ul o se e. e: co m Modes
4 has 5 Operation
!
Mode 4 Video signals down 1 co-ax cable
1
Mule 4 - Tx V1 V2 V3
Mule 4 - Rx Monitor
V1 V2 V3
12V DC
V4
V4
DVR
12V DC
V1, V2, V3 & V4 in this direction 1x RG59 co-ax cable
Mode
3 Video signals in one direction, 1 RS485 signal in the opposite direction.
2
Mule 4 - Rx
Mule 4 - Tx 12V DC
DVR
PTZ
Monitor
V1
V1 Data V2 V3
V2 V3
12V DC
Data V1, V2, V3 in this direction 1x RG59 co-ax cable
Mode
Control Keypad
RS485 Data
3 Video signals in one direction, 1 video signal in the opposite direction.
3
Mule 4 - Tx V1 V2 V3 V4
Mule 4 - Rx
Monitor
V1 V2 V3 V4
12V DC
V1, V2, V3 in this direction 1x RG59 co-ax cable
DVR
12V DC
V4 in this direction
Monitor
Mode
3 Video signals and 1 audio signal.
4
Mule 4 - Rx
Mule 4 - Tx
Monitor V1
12V DC
12V DC
V2 V3 Audio
DVR
V1 V2 V3 Audio
V1, V2, V3 & Audio in this direction 1x RG59 co-ax cable Microphone Programmable Audio Unit
Mode
5
3 Video signals in one direction, 1 audio signal in the opposite direction. Mule 4 - Tx
Mule 4 - Rx
Monitor V1
12V DC
12V DC
V2 V3 Audio
DVR
V1 V2 V3 Audio
Microphone
New VoiceOFF - Alarm activated voice/sound warning unit
