Transcript
1ch HDMI UTP Transceiver
Board Diagram
1ch HDMI UTP Transceiver
Transmitter
Connection LED HDCP LED
The product is a 1ch HDMI UTP Transceiver that transfer HDMI signal, IR signal and RS232 signal over one Cat5e/6 cable. The device adopts advanced HDBase-T technology and support HDMI 1.4 standard, HDCP1.2 standard. The distance is up to 100m. The devices need to be used in pair. It’s easy for operation and no setup request. It’s recommended in HD advertisement system, meeting system, family entertainment.
RS232 TX
IR TX
RX
Power LED
Application
12V DC Input
RS232 Port
CPU LED
HDMI Input M
on
Power
ito
Receiver
RJ45Port IR Port (Connect to the IR Transmitter)
Connection LED HDCP LED
r RS232 TX
IR RX
RX
RS232
IR TX
TX
RX
Serial Line HDMI Cable
D V D /E
VD
IR Transmitter
12V Power Input
LED
UTP/STP Cat5e/6 Cable
RS232 Port
HDMI Output
Power: P ower LED on , Normal； Run: System LED on, Normal；
Link: Connection LED on , Normal. HDCP: HDCP LED on, Normal.
Please check the following items, if you find them missing, please contact our dealer
RS232 TX
RX
UTP801HDT-B1 Serial Line IR Receiver
RJ45Port IR Port (Connect to the IR Receiver)
Installation Steps
Power IR RX
Power LED CPU LED
LED Monitor
HDMI Cable
IR Controller
Features Compatibility: Support HDMI1.4 Standard，HDCP1.2 Standard, Support CEC; Transmission Rate：10.2Gbps high speed duplex transmission;
1 set
UTP801HDR-B1
1 set
Hanger
4 set
DC12V/1A Power Adapter
2 set
IR transmitter and receiver
1Pair
HDMI Cable
1 set
User Manual Installation
1 set
1. Please power off the system before the installation； 2. Please make sure the cable is not being used by other devices； 3. Please use the HDMI cable to connect the HDMI output port of DVD/EVD to HDMI input Port of the device； 4. Please use another HDMI cable to connect the HDMI input port of LCD monitor and HDMI output port of the
Technology: Adopt HDBase-T technology, support hd 1080P@60Hz@30/36/48,3D,4K×2K;
device；
Distance：100m;
5. Please connect the IR receiver to the IR port of the device’s receiver side and connect the IR transmitter
Structure: Delicate design, support MIT rack and easy installation.
Notice 1) Please use the STP cable to make sure the max transmission distance. 2)The receiver’s shell temperature is up to 55℃ when operation, please be careful. 3)If you choose to use IR function, please purchase the IR transmitter and receiver.
to the IR port of the device’s transmitter side； 6. Please connect the RS232 controller to the transceiver’s RS232 port(The data is two way transmittion, so either transmitter or receiver’s port will do), and connect the controlling device’s RS232 to the other transceiver’s RS232 port； 7. Please use the Cat5e / 6 cable to connenct the RJ45 port of the device’s transmitter side and
receiver side； 8. Please examine the device to make sure the connection si stable and powering the system； 9. Please examine the image and RS232 controller to make sure the operation is normal.
1
2
1ch HDMI UTP Transceiver
1ch HDMI UTP Transceiver
Specification 连接接口
Problem Examination
连接接口
Please examine the items as the following steps Please make sure the installation si correct；
Item Description Transmission HDMI Signal 1ch Transmission Channel Function 1cg UTP/STP Cat5e/6 cable Transmission Medium Distance(Max) 100m Power Supply Power Adapter Power Range 12V DC Power Consumption Transmitter:<4W Receiver:<7W HDMI Ver. HDMI 1.4 HDCP Ver. HDCP1.2 HDMI Resolution Rate 1080p/1080i/720p/576p/576i/480p/480i，3D，4K×2K 24 bit/30 bit/36 bit/48 bit Support Color Format Support Audio Format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD HDMI Signal Max Transmission Rate 10.2Gbps Transmission Stereo Audio Format TMDS Signal 0.5~1.5V p-p (TMDS) DDC Signal 5V p-p (TTL) ≤5m(AWG26 HDMI1.3 Standard) Input Cable Length Output Cable Length ≤5m (AWG26 HDMI1.3 Standard) IR Port 3.5mm Standard IR Signal Transmittion IR Signal Infrared Control Signal Tranmission Port 3 Pin Port RS232 Transittion Function Duplex communication between receiver and transmitter Protection 2KV Per：IEC61000-4-4 1a Contact Discharge Level 3 Protection Level 1b Air Discharge Level 3 ESD Per：IEC61000-4-2 Working Temperature 0~55℃ -20~70℃ Environment Storage Temperature 0~95% Humidity Size 98mm×82mm×25mm Material Aluminum Structure Black Color Weight Transmitter：174g，Receiver：180g Stability MTBF >30000hrs
Please make sure the connection is s table , the HDMI cable support AWG26 HDMI 1.3 standard； Please make sure the RJ45 cable support EIA/TIA568A or 568B Standard； Please make sure the cable length is not overrun the max distance. ( STP Cat5e/ 6 cable is suggested )； Please make sure the s ystem is o n power； Please replace a function al device to replace the failure one; If the problem still exist , please contact the factory
Plug Producing Method Instruments to be used: wire crimper, network tester. Wire sequence of RJ45 plug should conform with EIA/TIA568A or 568B. 1. Please remove 2cm long the insulating layer, and bar the 4 pairs UTP cable; 2. Separate the 4 pairs UTP cable and straighten them; 3. Line up the 8 pieces of cables per EIA/TIA 568A or 568B. 4. Cut off the cables to leave 1.5cm bare wire; 5. Plug 8 cables into RJ45 plug, make sure each cable is in each pin. 6. Use the wire crimper to crimp it; 7. Repeat above 5 steps to make the another end; 8. Using network tester to test the cable whether is working.
pin color
pin
color
1
white/green
1
white/orange
2
green
2
orange
3
white/orange
3
white/green
4
blue
4
blue
5
white/blue
5
white/blue
6
orange
6
green
7
white/brown
7
white/brown
8
brown
8
brown
Specification Change will not be noticed
EIA/TIA 568A
3Pin Port to RS232 Installation The transceiver’s RS232 port to 3 pin port, 3 pin port to RS232,the cable should RX GND not be over 15m.
The 3Pin Port of the transceiver
No.5 Pin
EIA/TIA 568B
No.1 Pin
TX
3Pin Port
3
to GND
RS232 Port
to RX
to TX
RS232 Port
4
