Transcript
Installation Note
Keysight Technologies UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM)
Notices © Keysight Technologies, Inc. 2015
Manual Part Number
No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or translation into a foreign language) without prior agreement and written consent from Keysight Technologies, as governed by United States and international copyright laws.
E7515-90014
Warranty THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED “AS IS,” AND IS SUBJECT TO BEING CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD TO THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT SHALL NOT BE LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION CONTAINED HEREIN. SHOULD KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WARRANTY TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.
Statement of Compliance. This product has been designed and tested in accordance with accepted industry standards, and has been supplied in a safe condition. The documentation contains information and warnings that must be followed by the user to ensure safe operation and to maintain the product in a safe condition.
Edition Edition #1, April 2015 Published in USA Keysight Technologies, Inc. 1400 Fountaingrove Parkway Santa Rosa, CA 95403
A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met.
Technology Licenses The hardware and/or software described in this document are furnished under a license and may be used or copied only in accordance with the terms of such license.
Restricted Rights Legend If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is delivered and licensed as “Commercial computer software” as defined in DFAR 252.2277014 (June 1995), or as a “commercial item” as defined in FAR 2.101(a) or as “Restricted computer software” as defined in FAR 52.227-19 (June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of Software is subject to Keysight Technologies’ standard commercial license terms, and nonDOD Departments and Agencies of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June 1987). U.S. Government users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987) or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.
Safety Notices The following general safety precautions must be observed during all phases of operation of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Keysight Technologies, Inc. assumes no liability for the customer’s failure to comply with these requirements.
ii
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in personal injury or death. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met.
Keysight UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM) Installation Note
Warranty This Keysight Technologies instrument product is warranted against defects in material and workmanship for a period of three years from the date of shipment. During the warranty period, Keysight Technologies will, at its option, either repair or replace products that prove to be defective. For warranty service or repair, this product must be returned to a service facility designated by Keysight Technologies. Buyer shall prepay shipping charges to Keysight Technologies. Keysight Technologies shall pay shipping charges to return the product to Buyer. However, Buyer shall pay all shipping charges, duties, and taxes for products returned to Keysight Technologies from another country.
Where to Find the Latest Information Keysight will periodically update product documentation. For the latest information about this wireless test set, including software upgrades, operating and application information, and product and accessory information, see the following URL: http://www.keysight.com/find/UXM-Manuals
Is your product software up-to-date? Keysight will periodically release software updates to fix known defects and incorporate product enhancements. To search for software updates for your product, go to the Keysight Software Manager website at: http://www.keysight.com/find/softwaremanager
3
Keysight UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM) Installation Note This page is intentionally left blank.
4
Keysight UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM) Installation Note
Table of Contents Introduction ..................................................................................................................................... 7 Tools Required ................................................................................................................................. 7 Installation Kit Parts List ................................................................................................................. 7 Procedure......................................................................................................................................... 7 Figure 1 ........................................................................................................................................ 8 Figure 2 ........................................................................................................................................ 9
5
Keysight UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM) Installation Note This page is intentionally left blank.
6
Keysight UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM) Installation Note
Rack Mount Flange Kit (Option 1CM) Introduction Products Affected:
E7515A UXM Wireless Test Set
Serial Numbers:
AB12345678
Options:
all
To Be Performed By:
(X) Keysight Technologies Service Center (X) Personnel Qualified by Keysight (X) Customer 0.25 Hours
Estimated Installation Time:
This kit contains the parts and instructions to install a rack mount flange kit.
Tools Required
T-20 TORX screwdriver
T-10 TORX screwdriver
Installation Kit Parts List Item Quantity 1 2* 3* 4
2 4 4 1
Description
Part Number
Bracket, rack mount Dress Screw with Nylon Washer, Quartz Gray Nut-Sheetmetal 10-32 0.5-in-W Steel Zn Plated Installation Note
E7515-00050 0570-1577 0590-0804 E7515-90014
*Items 2 and 3 are for attaching the bracket to the equipment rack after installing the bracket on the UXM.
A rail kit for mounting the UXM in a Keysight equipment rack is not provided as part of this kit. If you are using a Keysight equipment rack, the E3664AC 3rd Party Rail Kit is required and must be ordered separately from Keysight.
The UXM is heavy, 33 - 36 kg (73 – 79 lbs). This rack flange kit is not intended to support the weight of the UXM. Ensure that the rail kit is correctly installed in the equipment rack prior to fitting the instrument into the rack. For additional information on mounting the UXM in an equipment rack, refer to the UXM Getting Started Guide.
7
Keysight UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM) Installation Note
Procedure The bracketed numbers (and letter) in the procedure correspond to the items in figure 1 and 2 below and the parts list above.
It is recommended that you install the rack mounting brackets on one side at a time. 1. Remove and retain for reuse the front panel mounting screws [A] using a Torx-20 driver, 4 screws on each side, refer to figure 1. 2. Position the rack mounting bracket (flange) [1], as shown in Figure 1, and, using a Torx-20 driver, attach the bracket using the four screws [2] removed in step 1. Torque to 32 in-lbs. 3. Repeat steps 1 and 2 for the remaining bracket. 4. To avoid obstructing the installation on the rack mount rail kit, remove the 4 feet from the bottom of the instrument by removing screws [1] using a Torx-10 driver, refer to Figure 2.
Figure 1
8
Keysight UXM Wireless Test Set Rack Mount Flange Kit (Option 1CM) Installation Note
Figure 2
9
This information is subject to change without notice. © Keysight Technologies, Inc. 2015 Published in USA, April 2015 E7515-90014
