V-RECON SERIES VP-FDNC30X High Speed Dome PTZ Camera
*Mount is not included
700TVL
0.01LUX
IP66
30x WDR
AUTO IRIS V/F
3DNR
24VAC
24VDC
Key Features • Pan: 360 at maximum speed of 0.05~220°/ sec • Tilt: 0~ 90 at maximum speed of 0.03~140° / sec • Auto panning function with 30 preset positions • Auto switch from 1 to 30 preset position • Built-in OSD Menu, to change dome parameter, save or call preset, and achieve auto scan, pattern etc • Surveillance of any subject that is constant and continuous • Auto focus lens: High-performance DSP to realize complete digit and ultra-high speed focus function • Wide Dynamic Range • Digital Noise Reduction • Light Suppression
Recommended Accessories
W6 (Outdoor) 11lbs. (5Kg)
P6 (Pendant) 9 lb. (4Kg)
I6 (In-Ceiling) 8 lb.
S6 (Surface) 3 lb.
Veilux Inc 802 Greenview Dr. Suite 200, Grand Prairie TX. 75050 USA Toll Free: 1-800-510-6528 Direct: (+1) 214 635-4855 Fax: (+1) 214 988-2858 [email protected] www.veilux.net
VM-POLE (Pole) 8 lb.
VM-CORNER (Corner) 9 lb. (4Kg)
Specifications
VP-FDNC30X
Sensor
1/3” Sony Effio CCD
Signal System
NTSC / PAL
Effective Pixels
976(H) x 596(V)
Min.. Illumination
Color: 0.1Lux, B/W: 0.01Lux
Lens
30x Optical Zoom (f=3~90.0mm)
Video Output Level
1.0Vp-p/75 Ω
Horizontal Resolution
700 TV Lines
Automatic Gain Control (AGC)
Auto/Manual
S/N Ratio
>60dB (Enhanced)
White balance
Auto
Iris
Auto / Manual
Electronic shutter
1/50 (1/60) s~1/10000s
Pan/Tilt Range
Pan: 360° continuous Tilt: 0°~90° auto flip
Pan/Tilt Speed
Pan: 0.05° ~ 220°/sec Tilt: 0.03°~140°/sec
Presets
256
Pattern
4 routes
Auto Cruise
Auto switch from 1 to 30 preset positions sequentially
Alarm In/Out
4/2
Communication Port
RS-485
Baud rate
1200 / 2400 / 4800 / 9600 / 19200 bps
Address
0~255
ENVIRONMENTAL Temperature
-13°F ~ 158°F (-25°C ~ +70°C) (w/o Heater) -58°F ~ 158°F (-50°C ~ +70°C) (with Heater)
ELECTRICAL Power Supply
24VDC/24VAC (12Volt Special Order)
PHYSICAL Unit Weight
3 lb. + Mount weight