Transcript
Installation Instructions
V Screen Hanging Bracket Kit for Wall Brackets by Draper
Extension brackets can be used to mount the V Screen extended from the wall. Brackets are not supplied with screen and must be ordered separately. Specify “V Screen Extension Brackets”. ➀ Mount the brackets to the wall, making sure they are level and vertically plumb. Installer must insure fasteners (not included) are of adequate strength and suitable for chosen mounting surface. ➁ Attach hanging bracket to wall bracket as shown. ➂ Mount the screen to the front of the bracket using the V Screen Bracket Mounting Kit provided with the brackets.
V Bar
Hanging Bracket CB ¼"-20 x 1¾" Z Keg, Flat Washer, ¼"-20 Nylock Nut
#10-24 x ½" Screw, Nylock Nut
Installation Instructions
Silhouette Hanging Bracket Kit for Wall Brackets by Draper 6" or 10"-14" extension brackets are needed to mount Silhouette extended from wall. Brackets are not supplied with screen and must be ordered separately. Specify “Silhouette Extension Brackets”. ➀ Mount the brackets to the wall, making sure they are level and vertically plumb. Installer must insure fasteners (not included) are of adequate strength and suitable for chosen mounting surface. ➁ Attach hanging bracket to wall bracket as shown. ➂ Attach (1) “Z” Clip (supplied with screen) to hanging bracket as shown. ➃ Engage the lip on back of screen case with lip of “Z” Clip and gently pull down to fully engage case to brackets. ➄ Screw in #10-16 x ½" screw on each bracket to lock screen case in place (see drawing).
CB ¼"-20 x 1¾" Z Keg, Flat Washer, ¼"-20 Nylock Nut
#10-16 x ½" Screw
Hanging Bracket
#10-24 x ½" Screw, Nylock Nut
Z Clip
Copyright © 2006 Draper Inc. Form HangingBrackets_Inst06
Printed in U.S.A.
If you encounter any difficulties installing or servicing your brackets, call your dealer or Draper , Inc., Spiceland, Indiana, (765) 987-7999, fax (765) 987-7142 or e-mail
[email protected]
