V680 Series - Omron Industrial Automation

Transcript

RFID System V680 Series CSM_V680 Series_DS_E_1_17 RFID Systems with ISO/IEC 18000-3 (15693) Compliance • High-speed communications and highly reliable communications provided with an electromagnetic induction system and unique technology. • Antennas and RF Tags with excellent environmental resistance. • Wide line-up of ultra-compact, long-life RF Tags, with capacities from 1 to 8 kbytes. • Visualizes the communications status for simple analysis of the operating environment. • Complies with FCC Rules and R&TTE Directive. System Configuration Connect V680 Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to RF Tags. Host Device OMRON Programmable Controller CJ/CS/NJ Series Standard Programmable Controller Personal computer ID Controller DeviceNet PROFIBUS I/O Connection Standard 1-channel Controller Standard 2-channel Controller V680-CA5D01-V2 V680-CA5D02-V2 CS/CJ-series PLC ID Sensor Units (1 or 2 channels) CJ1W-V680C11/C12 CS1W-V680-C11/C12 The V680-H01-V2 can be used only with 1-channel Controllers or ID Sensor Units. The maximum extendable cable length is 40 m. (Not including the Amplifier.) Do not connect more than two Extension Cables to each other. Amplifier Unit Amplifier-integrated Controller DeviceNet ID Slave ID Flag Sensor V680-HAM42-DRT V680-HAM91/-HAM81 PROFIBUS ID Slave (NPN output/PNP output) V680-HAM42-PRT For 1-Kbyte RF Tags V680-HA63A For 2- or 8-Kbyte RF Tags V680-HA63B Cable length (0.5/5/10) m ∗ V700-A40-W Cable length (2/5/10/20/30) m The maximum extendable cable length is 30 m. (not including the Amplifier) Two Extension Cables cannot be connected to each other. Max. extended length: 30.5 m V700-A40/41/42/43/44/45 Cable length (2/3/5/10/20/30) m Max. extended length: 62.5 m Extension Cable Interface Cable V680-A60 Cable length (2/5/10) m Antenna V680-H01-V2 Cable length 0.5 m V680-HS51 Cable length 2 m V680-HS52 Cable length (2/12.5) m V680-HS63 Cable length (2/12.5) m V680-HS65 Cable length (2/12.5) m An Amplifier is not required. It is built in. ∗ 1-kbyte RF Tags 2-kbyte RF Tags 8-kbyte RF Tags RF Tag V680-D1KP52MT V680-D1KP66T V680-D1KP66MT V680S-D2KF67 V680S-D2KF67M V680S-D8KF67 V680S-D8KF67M V680-D1KP53M V680-D1KP66T-SP V680S-D2KF68 V680S-D2KF68M V680S-D8KF68 V680S-D8KF68M V680-D1KP58HTN V680-D2KF52M V680-D1KP54T V680-D1KP52M-BT01 V680-D1KP52M-BT11 V680-D2KF52M-BT01 V680-D2KF52M-BT11 * For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on page 3. 1 V680 Series Handheld Type Host Device Standard Programmable Controller Handheld Reader Writer Standard Serial Handheld Reader Writer V680-CH1D SYSMAC Series AC Adapter (order separately) V600-A22 Personal computer Handheld Terminal (Recommended: Zebra Technologies Handheld Terminal) USB Handheld Reader Writer V680-CHUD Handheld Reader Writer for Zebra Technologies Handheld Terminal V680-CH1D-PSI ∗ 1-kbyte RF Tags 2-kbyte RF Tags 8-kbyte RF Tags RF Tag V680-D1KP52MT V680-D1KP66T V680-D1KP66MT V680S-D2KF67 V680S-D2KF67M V680S-D8KF67 V680S-D8KF67M V680-D1KP53M V680-D1KP66T-SP V680S-D2KF68 V680S-D2KF68M V680S-D8KF68 V680S-D8KF68M V680-D1KP58HTN V680-D2KF52M V680-D1KP54T V680-D1KP52M-BT01 V680-D1KP52M-BT11 V680-D2KF52M-BT01 V680-D2KF52M-BT11 Note: Certificated as type approval of radio in 51 countries including Japan, European countries and the USA . However, some models cannot be used. Contact your OMRON sales representative for details on whether application is supported in other countries. The latest information on the status of certification for radio wave regulations in various countries can be confirmed on the OMRON website. * For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on page 3. 2 V680 Series Combinations of Amplifier Units, Antennas, and RF Tags 1-kbyte RF Tags EEP-ROM 1-kbyte Amplifier Unit V680-HA63A V680-HAM42-DRT V680-HAM@1 V680D1KP54T V680D1KP66T V680D1KP66MT V680D1KP66TSP Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes V680SD2KF67 V680SD2KF67M V680SD2KF68 V680SD2KF68M Yes Yes Yes Yes Yes Yes V680-HS65-@ Yes Yes Yes Yes V680-HS63-W Yes Yes Yes Yes V680-HS65-W Yes Yes Yes Yes Antenna V680D1KP52MT V680D1KP53M V680-HS51 Yes Yes V680-HS52-@ Yes Yes V680-HS63-@ Yes* V680-HAM42-PRT Yes* V680-HS65-W V680-H01-V2 (Antenna with Built-in Amplifier) V680-CH@D (Handheld Reader Writer) Yes Yes V680D1KP52MBT@1 Yes V680-HS65-@ V680-HS63-W V680D1KP58HTN Yes Yes Yes Yes Yes 2-kbyte RF Tags FRAM 2-kbyte Amplifier Unit V680-HA63B V680-HAM42-DRT V680-HAM@1 V680-HAM42-PRT Antenna V680D2KF52M V680D2KF52MBT@1 V680-HS51 Yes Yes V680-HS52-@ Yes Yes V680-HS63-@ Yes* V680-H01-V2 (Antenna with Built-in Amplifier) V680-CH@D (Handheld Reader Writer) Yes Yes Yes Yes Yes V680SD8KF68 V680SD8KF68M Yes Yes 8-kbyte RF Tags FRAM 8-kbyte Amplifier Unit V680SD8KF67 V680SD8KF67M V680-HS52-@ Yes Yes V680-HS63-@ Yes Yes Yes Yes V680-HS65-@ Yes Yes Yes Yes V680-HS63-W Yes Yes Yes Yes V680-HS65-W Yes Yes Yes Yes Antenna V680-HS51 V680-HA63B V680-HAM42-DRT V680-HAM@1 V680-HAM42-PRT V680-H01-V2 (Antenna with Built-in Amplifier) Yes V680-CH@D (Handheld Reader Writer) Yes Yes Yes Yes Yes Note: For details, refer to the relevant user’s manual (Z248, Z249, Z262, Z271, Z272, Z278, Z279, and Z339). * When using the V680-D1KP52MT or V680-D2KF52M embedded in metal, use the V680-HS51/-HS52 Antenna. Communications will not be possible if the V680-HS63 Antenna is used. Communications will not be possible if the V680-HS65 Antenna is used with the V680-D1KP52MT, V680-D1KP53M, or V680-D2KF52M. Communication is also possible with RF Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693). However, communication with RF Tags other than those of the V680 Series cannot be assured. The user must confirm communication capabilities carefully prior to use. 3 V680 Series Ordering Information RF Tag Type Memory capacity Appearance 1 kbyte Size Metallic compatibility 8 dia. × 5 mm For embedding in metallic or non-metallic surface V680-D1KP52MT 10 dia. × 4.5 mm For embedding in metallic or non-metallic surface V680-D1KP53M 20 dia. × 2.7 mm For flush mounting on nonmetallic surface V680-D1KP54T For flush mounting on metallic surface V680-D1KP66MT For flush mounting on nonmetallic surface V680-D1KP66T 95 × 36.5 × 6.5 mm For flush mounting on nonmetallic surface V680-D1KP66T-SP 80 dia. × t10 mm For flush mounting on nonmetallic surface V680-D1KP58HTN 34 × 34 × 3.5 mm M10 × 12 mm Battery-less Model M8 × 12 mm 8 dia. × 5 mm 40 × 40 × 5 mm 2 kbytes 86 × 54 × 10 mm V680-D1KP52M-BT01 * For mounting as bolts For embedding in metallic or non-metallic surface V680-D2KF52M For flush mounting on metallic surface V680S-D2KF67M For flush mounting on nonmetallic surface V680S-D2KF67 For flush mounting on metallic surface V680S-D2KF68M For flush mounting on nonmetallic surface V680S-D2KF68 M10 × 12 mm M8 × 12 mm 40 × 40 × 5 mm 8 kbytes 86 × 54 × 10 mm V680-D1KP52M-BT11 * V680-D2KF52M-BT01 * For mounting as bolts V680-D2KF52M-BT11 * For flush mounting on metallic surface V680S-D8KF67M For flush mounting on nonmetallic surface V680S-D8KF67 For flush mounting on metallic surface V680S-D8KF68M For flush mounting on nonmetallic surface V680S-D8KF68 * Place orders in units of boxes (containing 20 units). 4 V680 Series Antenna (Detachable Amplifier Unit Type) Type Appearance Standard cable, waterproof connector M22 × 65 mm Flexible cable, nonwaterproof connector Cylindrical Standard cable, nonwaterproof connector M12 × 35 mm Standard cable, waterproof connector 40 × 53 × 23 mm Flexible cable, nonwaterproof connector Square Size Standard cable, waterproof connector 100 × 100 × 30 mm Flexible cable, nonwaterproof connector Cable length Model 2m V680-HS52-W 2M 12.5 m V680-HS52-W 12.5M 2m V680-HS52-R 2M 12.5 m V680-HS52-R 12.5M 2m V680-HS51 2M 2m V680-HS63-W 2M 12.5 m V680-HS63-W 12.5M 2m V680-HS63-R 2M 12.5 m V680-HS63-R 12.5M 2m V680-HS65-W 2M 12.5 m V680-HS65-W 12.5M 2m V680-HS65-R 2M 12.5 m V680-HS65-R 12.5M Antenna with Built-in Amplifier Type Appearance Size 250 × 200 × 35 mm Square Cable length 0.5 m * Model V680-H01-V2 * Use an Antenna Cable to connect the Antenna to the Controller. The maximum cable length is 30.5 m. Amplifier Unit Type Appearance Size For 1-kbyte memory Cable length Model 0.5 m V680-HA63A 0.5M 5m V680-HA63A 5M 10 m V680-HA63A 10M 0.5 m V680-HA63B 0.5M 5m V680-HA63B 5M 10 m V680-HA63B 10M 25 × 40 × 65 mm For 2-/8-kbyte memory ID Controller Type No. of connectable Amplifiers Appearance Size Communication interface V680-CA5D01-V2 Single 105 × 90 × 65 mm DC power supply Dual Model RS232C, RS422/RS485 V680-CA5D02-V2 5 V680 Series ID Sensor Units Type Appearance Connected ID System External power supply 1 Head CJ Special I/O Unit V680 Series Appearance Model 5V 24 V External 1 unit number 0.26 0.13 * − CJ1W-V680C11 2 unit number 0.32 0.26 − CJ1W-V680C12 External power supply No. of unit numbers used 1 Head − 2 Heads 24 VDC Connected ID System CS Special I/O Unit Current consumption (A) − 2 Heads Type No. of unit numbers used Current consumption (A) Model 5V 26 V External 1 unit number 0.26 0.13 * − CS1W-V680C11 2 unit number 0.32 − 0.36 CS1W-V680C12 V680 Series * When connected to the V680-H01: 0.28 A Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave) Appearance Size Network Compatibility Model DeviceNet V680-HAM42-DRT PROFIBUS V680-HAM42-PRT 65 × 65 × 65 mm Amplifier-integrated Controllers (ID Flag Sensors) Type Appearance Size NPN output Model V680-HAM91 90 × 30 × 65 mm PNP output V680-HAM81 Special Interface Cables (for V680-HAM91 and V680-HAM81) Cable length Model 2m V680-A60 2M 5m V680-A60 5M 10 m V680-A60 10M Appearance Note: 1. The connectors are not waterproof. 2. The cable length can be extended to a maximum of 10 m. 3. Normally two Interface Cables are required for 1 Unit. If you do not need to write to ID Tags, or use the address shift or noise check functions, then one Interface Cable is sufficient. Handheld Reader Writers Name Appearance Model Model with standard serial connector V680-CH1D Model with USB connector and 0.8-m cable V680-CHUD 0.8M Model with USB connector and 1.9-m cable V680-CHUD 1.9M Models for Zebra Technologies Handheld Terminal V680-CH1D-PSI AC Adapter (for V680-CH1D) V600-A22 6 V680 Series Accessories (Order Separately) RF Tag Attachment Type Appearance Model For the V680-D1KP66T V600-A86 For the V680-D@KF68 V680-A81 To mount the V680D1KP58HTN V680-A80 For the V680-D1KP54T V700-A80 Amplifier Unit Special Extension Cable (Amplifier Unit to Controller) Cable length Appearance Model 2m V700-A40 2M 3m V700-A41 3M 5m V700-A42 5M 10 m V700-A43 10M 20 m V700-A44 20M 30 m V700-A45 30M Note: The cable can be extended up to 40 m. Up to two extension cables can be used. V680-H01 Antenna Special Cable (Antenna to Controller) Cable length Appearance Model 2m V700-A40-W 2M 5m V700-A40-W 5M 10 m V700-A40-W 10M 20 m V700-A40-W 20M 30 m V700-A40-W 30M Note: The cable can be extended up to 30 m. Only one extension cable can be used. RS-232C Communications Connector Name Model Connector Plug XM3B-0922-111 Connector Hood XM2S-0911 * An RS422/RS485 Communications Connector is attached to the Controller. ID Map Manager Type Model Japanese version V680-A-IMMJP-P02 * English version V680-A-IMMEG-P02 * Chinese version V680-A-IMMCN-P02 * * Supported operating system: Windows 7 For details, consult your OMRON representative. 7 V680 Series Ratings and Performance RF Tag (1-kbyte Memory) Item Model V680D1KP52MT V680D1KP54T Memory capacity 1,000 byte (user area) Memory type EEPROM Data retention time *1 10 years after writing (85°C max.) Write endurance 100,000 times per block (at 25°C) V680D1KP66T V680D1KP66MT V680D1KP53M Ambient operating −25 to 85°C (with no icing) temperature (during communication) V680D1KP66T-SP −25 to 70°C (with no icing) Ambient storage temperature (during data backup) −40 to 125°C (with no icing) Heat resistance: 1,000 thermal cycles each of 30 minutes at −10°C/150°C, High−40 to 125°C temperature storage: 1,000 hours at 150°C *2 200 thermal cycles each of 30 minutes at −10°C/180°C, High- (with no icing) temperature storage: 200 hours at 180°C *3 Ambient operating humidity 35 to 95% Degree of protection IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4 −40 to 110°C (with no icing) IP67 (IEC 60529:2001) Oil resistance equivalent to IP68 (IEC 60529:2001) IP67 Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4 IP67G (JIS C 0920:2003, Appendix 1) *4 Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 8 dia. × 5 mm 20 dia. × 2.7 mm Materials Case: PPS resin Filling: Epoxy resin Molding: PPS resin Weight Approx. 0.5 g Approx. 2 g Approx. 6 g Approx. 7.5 g Approx. 1 g Approx. 20 g Metallic compatibility Yes No No Yes Yes No 34 × 34 × 3.5 mm 10 dia. × 4.5 mm (DIN698373) 95 × 36.5 × 6.5 mm (excluding protrusions) Case: PPS resin Filling: Epoxy resin External resin: PFA Tag body: PPS resin Note: For details, refer to the User's Manual (Cat. No. Z262). *1. Refer to the User's Manual (Cat. No. Z262) for data retention time for temperatures of 85°C or higher. If the V680 has been stored at 125°C or higher, write the data again even if the data does not need to be changed. *2. 150°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has been checked through testing 1,000 thermal cycles each of 30 minutes at −10/150°C. (Test samples: 22, defects: 0) *3. 180°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has been checked through testing 200 thermal cycles each of 30 minutes at −10°C/180°C. (Test samples: 22, defects: 0) *4. Oil resistance has been tested using a specific oil as defined in the OMRON test method. RF Tag with 1-kbyte Memory with High-temperature Capability Item Model V680-D1KP58HTN Memory capacity 1,000 bytes (user area) Memory type EEPROM Data Retention 10 years after writing (85°C or less), 0.5 year after writing (85°C to 125°C) Total data retention at high temperatures exceeding 125°C is 10 hours *1 Write Endurance 100,000 times per block (25°C) Ambient operating temperature −25°C to 85°C (with no icing) Ambient storage temperature −40 to 250°C (with no icing) *2 (Data retention: -40 to 125°C) 1. 2,000 cycles of 30 minutes each between room temperature and 200°C 2. 500 hours at 250°C Ambient storage humidity No restrictions. Degree of protection IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3 Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude, acceleration: 150 m/s2, 10 sweeps each in X, Y, and Z directions for 15 minutes each Shock resistance 500 m/s2, 3 times each in X, Y, and Z directions (total: 18 times) Materials PPS resin Weight Approx. 70 g *1 After storing data at high temperatures, rewrite the data even if changes are not required. High temperatures are those exceeding 125°C up to 250°C. *2 Storing RF Tags under high temperatures or under heat cycles will adversely affect the performance of the internal parts and the service life of the RF Tags. The RF Tag were placed in the following high temperatures and then evaluated in-house. It was confirmed that no problems occurred. 1. 2,000 cycles of 30 minutes each between room temperature and 200°C. 2. 500 hours at 250°C. *3 Oil resistance has been tested using a specific oil as defined in the OMRON test method. 8 V680 Series RF Tag (2-kbyte Memory) Item Model Memory capacity Memory type V680S-D2KF67 V680S-D2KF67M 2,000 bytes (user area) FRAM Data retention time *1 10 years after writing at 85°C Write endurance One trillion writes for each block(85°C or less), Number of accesses *2: One trillion writes Ambient operating temperature Ambient storage temperature Ambient operating humidity V680S-D2KF68 V680S-D2KF68M V680-D2KF52M −40 to 125°C (with no icing) 10 years after writing (55°C max.) Access frequency per block *2: 10 billion times −25 to 85°C (with no icing) −40 to 85°C (with no icing) 35 to 85% 35 to 95% −20 to 85°C (with no icing) Degree of protection IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3 IPX9K (DIN 40 050) Vibration resistance No abnormality after application of 10 to 500 10 to 2,000 Hz, 1.5-mm double amplitude at Hz, 1.5-mm double amplitude, acceleration: 150 m/s2 acceleration with 10 sweeps in X, Y, 100 m/s2, 10 sweeps each in X, Y, and Z and Z directions for 15 minutes each directions for 11 minutes each Shock resistance Appearance 500 m/s2 in X, Y, and Z directions 3 times each (Total:18 times) 40 × 40 × 5 mm 86 × 54 × 10 mm Materials Exterior: PPS resin Weight Approx. 12 g Approx. 11.5 g Metallic compatibility No Yes Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z339). Approx. 44 g No Approx. 46 g Yes IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each 8 dia. × 5 mm Case: PPS resin Filling: Epoxy resin Approx. 0.5 g Yes *1. Refer to the User's Manual (Cat. No. Z248) for data retention time for temperatures of 55°C or higher. *2. The total Read or Write communication frequency is called the access frequency. *3. Oil resistance has been tested using a specific oil as defined in the OMRON test method. RF Tag with 8-kbyte Memory Item Model Memory capacity Memory type Data retention time Write endurance Ambient operating temperature Ambient storage temperature Ambient operating humidity Degree of protection Vibration resistance Shock resistance Dimensions Materials Weight Metallic compatibility V680S-D8KF67 V680S-D8KF67M 8,192 bytes (user area) FRAM 10 years after writing (85°C or less) 1 trillion times per block. *1 Access frequency : 1 trillion times: V680S-D8KF68 V680S-D32KF68M −20 to 85°C (with no icing) −40 to 125°C (with no icing) 35 to 85% IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2 IPX9K (DIN 40 050) 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration 10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each with 10 sweeps in X, Y, and Z directions for 11 minutes each 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) 40 × 40 × 4.5 mm 86 × 54 × 10 mm Molding: PPS resin Approx. 11.5 g Approx. 12 g Approx. 44 g Approx. 46 g No Yes No Yes Note: For details, refer to the User’s Manual (Cat. No. Z339). *1. The total Read or Write communication frequency is called the access frequency. *2. Oil resistance has been tested using a specific oil as defined in the OMRON test method. 9 V680 Series Bolt RF Tags (1-kbyte Memory) Item Model Memory capacity Memory type Data retention time Write endurance Ambient operating temperature (during communication) Ambient storage temperature (during data backup) Ambient operating humidity Degree of protection Vibration resistance Shock resistance Materials Weight V680-D1KP52M-BT01 1,000 bytes (user area) EEPROM 10 years after writing (85°C or less), 0.5 years after writing (85 to 125°C) Total data retention at high temperatures exceeding 125°C is 10 houres 100,000 times per block (at 25°C) V680-D1KP52M-BT11 −25 to 85°C (with no icing) −40 to 125°C (with no icing) 35 to 95% IP68 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) * 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Bolt: SUS303, Case (RF Tag): PPS resin, Filling (RF Tag): Epoxy resin Approx. 25 g Approx. 10 g * Oil resistance has been tested using a specific oil as defined in the OMRON test method. Bolt RF Tags (2-kbyte Memory) Item Model Memory capacity Memory type Data retention time Write endurance Ambient operating temperature (during communication) Ambient storage temperature (during data backup) Ambient operating humidity Degree of protection Vibration resistance Shock resistance V680-D2KF52M-BT01 2,000 bytes (user area) FRAM 10 years after writing (55°C or less), 2.9 years after writing (85°C max.) 10 billion reads/writes per block, Number of accesses *1: 10 billion times V680-D2KF52M-BT11 −25°C to 85°C (with no icing) −40°C to 85°C (with no icing) 35 to 95% IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2 10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Bolt: SUS303, Materials Case (RF Tag): PPS resin, Filling (RF Tag): Epoxy resin Weight Approx. 25 g Approx. 10 g *1 The number of accesses is the total number of communications for reading or writing. *2 Oil resistance has been tested using a specific oil as defined in the OMRON test method. 10 V680 Series Cylindrical Antenna (Detachable Amplifier Unit Type) Item Model V680-HS51 (Standard Cable, Non-waterproof Connector) Ambient operating temperature −10°C to 60°C (with no icing) Ambient storage temperature −25°C to 75°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) V680-HS52-W (Standard Cable, Waterproof Connector) V680-HS52-R (Standard Cable, Non-waterproof Connector) Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC 60529:2001) IP67 (IEC 60529:2001) IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C Oil resistance equivalent to IP67G (JIS C Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2 0920:2003, Appendix 1) (Antenna portion) *1 0920:2003, Appendix 1) (Antenna portion) *2 Vibration resistance 10 to 2,000 Hz variable vibration, 1.5-mm 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 double amplitude at 150 m/s2 acceleration, with 10 sweeps in X, Y, and acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Z directions for 15 minutes each Shock resistance 1,000 m/s2 in X, Y, and Z directions 3 times each (18 times in total) 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance M12 × 35 mm M22 × 65 mm Materials ABS, brass, epoxy resin filling Weight Approx. 55 g (with 2-m cable) Approx. 850 g (with 12.5-m cable) Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM1030 standard. *2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method. Square Antenna (Detachable Amplifier Unit Type) Item Model V680-HS63-W (Standard Cable, Waterproof Connector) Ambient operating temperature −10°C to 60°C (with no icing) Ambient storage temperature −25°C to 75°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) V680-HS63-R (Flexible Cable, Non-waterproof Connector) Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC 60529:2001) IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2 (Antenna portion) *1 Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 40 × 53 × 23 mm Materials ABS, epoxy resin filling Weight Approx. 850 g (with 12.5-m cable) Item Model V680-HS65-W (Standard Cable, Waterproof Connector) Ambient operating temperature −25°C to 70°C (with no icing) Ambient storage temperature −40°C to 85°C (with no icing) Ambient operating humidity 35% to 95% (with no condensation) V680-HS65-R (Flexible Cable, Non-waterproof Connector) Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *1 Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 100 × 100 × 30 mm Materials ABS, epoxy resin filling IP67 (IEC 60529:2001) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) (Antenna portion) *2 Weight Approx. 1,100 g (with 12.5-m cable) Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The degree of protection for the Connector is IP67/IP65. Oil resistance has been tested using a specific oil as defined in the OMRON test method. *2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method. 11 V680 Series Square Antenna with Built-in Amplifier Item Model Ambient operating temperature Amplifier Unit V680-H01-V2 Item Model V680-HA63A V680-HA63B −10°C to 55°C (with no icing) Ambient operating temperature −10°C to 55°C (with no icing) Ambient storage temperature −35°C to 65°C (with no icing) Ambient storage temperature −25°C to 65°C (with no icing) Ambient operating humidity 35% to 85% (with no condensation) Ambient operating humidity 35% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 100 VDC) between connector terminals and the rear plate Insulation resistance 20 MΩ min. (at 500 VDC) between the cable terminals and the case Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between connector terminals and the rear plate Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max. Degree of protection IP63.(IEC60529); Mounting direction: Communications surface facing up Degree of protection IP40 (IEC60529) *1 10 to 150 Hz, 0.35-mm single amplitude, acceleration: 50 m/s2, 10 sweeps in each of 3 axis directions (up/down, left/right, and forward/backward) for 8 minutes each Vibration resistance Vibration resistance 10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each Shock resistance 150 m/s2, 3 times each in 6 directions (Total: 18 times) 500 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 25 × 40 × 65mm (not including projections) Material Polycarbonate (PC) resin Weight Approx. 650 g (with 10-m cable) Cable length 5 m, 10 m Shock resistance Appearance 200 × 250 × 40 mm Material Polycarbonate (PC) resin, ASA resin / Rear Panel: Aluminum Weight Approx. 900 g 0.5 m (use a relay cable to connect to the Controller up to 30.5 m) Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). Cable length IP67/IP65 (IEC60529) *2 Transmittable RF Tags 1-kbyte memory 2-, 8-kbyte memory Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. When connected to the V680-HS@@-R or V680-HS52-R. *2. When connected to the V680-HS@@-W or V680-HS52-W. (Not including the Connector on the Controller.) ID Controller Item Model V680-CA5D01-V2 V680-CA5D02-V2 Power supply voltage (Power consumption) 24 VDC (−15% to +10%) 15 W max., 0.8 A max. Communications Specifications RS-232C, RS-422, RS-485 Input Specifications (Input voltage) RST, TRG1, and TRG2 24 VDC (+10% to −15%, including ripple) (PNP and NPN compatible) Output Specifications (Maximum switching capacity) 24 VDC (+10% to −15%, including ripple) RUN, BUSY/OUT3, ERROR/OUT4, OUT1, PNP and NPN compatible and OUT2 Ambient operating temperature −10 to 55°C (with no icing) Ambient storage temperature −25 to 65°C (with no icing) Ambient operating humidity 25% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) applied as follows: (1) Between power supply terminals and grounded case (2) Between ground and terminals Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute (1) Between power supply terminals and grounded case (2) Between ground and terminals Degree of protection Panel mounted (equivalent to IP20) Vibration resistance 10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 150 m/s2 Appearance 105 × 90 × 65 mm (not including projections) Material Polycarbonate (PC) resin, ABS resin Weight Approx. 300 g Connectable Amplifier Units 1 Note: For details, refer to the User's Manual (Cat. No. Z249). 2 USB Port The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details. When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9. The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port. 12 V680 Series ID Sensor Units Item Model Internal: 5 V Current Internal: consumpt 24 V/26 V ion External: 24 V CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12 260 mA 320 mA 260 mA 320 mA 130 mA * 260 mA 125 mA * − − − − 360 mA Ambient operating temperature 0 to 55°C Ambient storage temperature −20°C to 75°C Ambient operating humidity 10% to 90% (with no condensation) Insulation resistance 20 mΩ min. at 500 VDC Dielectric strength 1,000 VAC for 1 minute Degree of protection Mounted in panel (IP30) Vibration resistance 10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each Shock resistance 147 m/s2 in X, Y, and Z directions 3 times each Appearance 31 × 65 × 90 mm (excluding protrusions) 35 × 130 × 101 mm (excluding protrusions) * When connected to the V680-H01: 280 mA. The V680-H01-V2 can be connected only to a 1-channel ID Sensor Unit. A 2-channel Unit cannot be used. Functional Specifications of ID Sensor Units Item Model CJ1W-V680C11 CJ1W-V680C12 CS1W-V680C11 CS1W-V680C12 Communications control protocol Special protocol for CS, CJ and NJ PLCs Number of Antenna connections 1 Commands Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check, Number of Writes Control, Copy (CJ1W-V680C12 and CS1W-V680C12 only), Read with Error Correction/Write with Error Correction, UID Read, and Noise Measurement. The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO repeat *, Multi-access trigger, and Multi-access repeat * Data transfer quantity 2,048 bytes max. (160 bytes/scan) Diagnostic function (1) CPU watchdog timer (2) Communications error detection with RF Tag (3) Antenna power supply error Monitoring/testing functions Tag communications can be tested in Test Mode. Status is displayed by LED indicators. 2 Number of allocated 10 words 20 words words Note: For details, refer to the User's Manual (Cat. No. Z271). 1 10 words 2 20 words * Cannot be used for communications with the V680-D1KP@@. 13 V680 Series Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave) Item Model V680-HAM42-DRT V680-HAM42-PRT Network compatibility DeviceNet PROFIBUS DP-V0 Connectable Antennas One channel (V680-HS@@) Rated voltage 24 VDC (−15% to 10%) including 10% ripple (p-p) Power consumption 4 W max. (Current consumption of 200 mA max. at power supply voltage of 24 VDC) Ambient operating temperature −10 to 55°C (with no icing) Ambient storage temperature −25 to 65°C (with no icing) Ambient operating humidity 25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%) Insulation resistance 20 MΩ min. (at 500 VDC) between all terminals excluding the ground terminal and the case Dielectric strength 1,000 VAC (50/60 Hz) for 1 minute between all terminals excluding the ground terminal and the case Vibration resistance 10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each Shock resistance 150 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 65 × 65 × 65 mm (excluding protrusions) Degree of protection IEC 60529, IP20 Materials Polycarbonate (PC) resin, ABS resin Weight Approx. 150 g Mounting DIN Track Note: 1. For details, refer to the User's Manual (Cat. No. Z278). 2. The number of words allocated in the master depends on the Access Mode. Amplifier-integrated Controllers (ID Flag Sensors) Item Model V680-HAM91 V680-HAM81 Rated voltage 24 VDC (−15% to +10%) including 10% ripple (p-p) Power consumption 3.5 W (24 VDC, 150 mA max. except external I/O line current) Input specifications Transistor output Short-circuit current: 3 mA (typical) (for short-circuit between IN terminal and 0 V), OFF voltage: 15 to 30 VDC, ON voltage: 0 to 5 VDC, Input impedance: 8.2 kΩ, Applied voltage: 30 VDC max. Output specifications NPN open-collector output 30 VDC, 20 mA max., Residual voltage: 2 V max. Ambient operating temperature −10 to 55°C (with no icing) Ambient storage temperature −25 to 65°C (with no icing) Ambient operating humidity 25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%) Insulation resistance 20 MΩ min. (at 500 VDC) between all terminals excluding the FG terminal and the case Dielectric strength 1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case Vibration resistance 10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes each Shock resistance 150 m/s2 in X, Y, and Z directions 3 times each (18 times in total) Appearance 90 × 30 × 65 mm (excluding protrusions) Degree of protection IEC 60529, IP40 Materials Polycarbonate (PC) resin, ABS resin Weight Approx. 130 g PNP open-collector output 30 VDC, 20 mA max., Residual voltage: 2 V max. Mounting DIN Track Note: 1. For details, refer to the User’s Manual (Cat. No. Z279). 2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor Unit, mount it inside of a control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable (sold separately). 14 V680 Series Handheld Reader Writers Item Model V680-CHUD 0.8M V680-CHUD 1.9M V680-CH1D V680-CH1D-PSI Power supply voltage 5 VDC ± 5% (at the connector section of the product) Current consumption 500 mA max. (for a power supply voltage of 5.0 V) Communications specifications USB (Series A plug) Ver.1.1 Ambient operating temperature during communication 0 to +40°C Ambient storage temperature −25 to +65°C Ambient operating humidity during communication 35% to 85% (with no condensation) Insulation resistance 50 MΩ min. (at 500 VDC) between connector and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case Degree of protection IEC 60529: IP63 * Vibration resistance Destruction: 10 to 150 Hz variable vibration, 0.2-mm double amplitude and 15 m/s2 acceleration with 10 sweeps for 8 min each in 6 directions Shock resistance Destruction: 150 m/s2, 3 times each in X, Y, and Z directions Weight Approx. 110 g (including connector and cable) RS-232C (D-SUB 9-pin) compatible with IBM PC/ AT) Approx. 140 g (including connector and cable) Cable length 0.8 m 1.9 m Note: Refer to the User’s Manual (Cat. No. Z272) for details. Contact your OMRON sales representative for details on drivers for Windows. RS-232C (D-SUB 9-pin) Approx. 170 g (including connector and cable) Approx. 120 g (including connector and cable) 2.5 m 0.8 m * This does not include the connector section. The main unit is not resistant to chemical or oils. AC Adapter (for V680-CH1D) Item Model V600-A22 Input voltage 100 to 120 VAC at 50/60 Hz Input current AC: 300 mA (at load current of 2.0 A) Output voltage DC5V ± 0.25V Ambient operating temperature 0 to +40°C Ambient storage temperature −20 to +85°C (with no icing) Ambient operating humidity 5% to 95% (with no condensation) Insulation resistance 100 MΩ min. (at 500 VDC) between input terminals and output terminals Dielectric strength 2,000 V for 1 minute between input terminals and output terminals with a current leakage of 10 mA max. Weight Approx. 70 g Applicable standards UL 15 V680 Series Communication Specifications ID Controllers (V680-CA5D01-V2/V680-CA5D02-V2) RF Tag (1-kbyte Memory) Communication Recommended combination RF Tag V680-D1KP52MT Antenna V680-HS51 V680-HS52 Function Read distance Communication range (unit: mm) RF Tag and Antenna mounting conditions 0.5 to 6.5 (axis offset ±2) Write distance 0.5 to 6.0 (axis offset ±2) Read distance 0 to 9.0 (axis offset ±2) Write distance 0 to 8.5 (axis offset ±2) Read distance 0 to 12.0 (axis offset ±2) Write distance 0 to 9.5 (axis offset ±2) V680-D1KP52MT Non-metallic V680-HS51 Metallic V680-D1KP52MT V680-HS52 V680-HS63 V680-D1KP52MT V680-HS51 (embedded in metallic surface: steel) Resin, plastic, wood, etc. *2 Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 Read distance Non-metallic Resin, plastic, wood, etc. V680D1KP52MT *2 Non-metallic 0.5 to 3.5 *1 (axis offset ±2) Metallic V680-HS51 V680-HS52 Write distance 0.5 to 3.0 *1 (axis offset ±2) Read distance 0 to 4.5 *1 (axis offset ±2) Metallic V680-D1KP52MT Metallic V680-HS52 V680-D1KP53M V680-HS51 V680-HS52 V680-D1KP53M V680-HS51 (embedded in metallic surface : steel) Write distance 0 to 4.0 *1 (axis offset ±2) Read distance 0.5 to 6.5 (axis offset ±2) Write distance 0.5 to 6.0 (axis offset ±2) Read distance 0 to 9.0 (axis offset ±2) Write distance 0 to 8.5 (axis offset ±2) Read distance 0.5 to 3.5 *1 (axis offset ±2) *2 Non-metallic V680-D1KP52MT V680-D1KP53M V680-HS51 Non-metallic Resin, plastic, wood, etc. Metallic V680-D1KP53M Non-metallic V680-HS52 *2 Resin, plastic, wood, etc. Non-metallic Metallic V680-HS51 V680-HS52 Write distance 0.5 to 3.0 *1 (axis offset ±2) Read distance 0 to 4.5 *1 (axis offset ±2) Metallic V680-D1KP53M Metallic V680-HS52 Write distance 0 to 4.0 *1 (axis offset ±2) *2 Non-metallic V680-D1KP53M *1. When using the V680-D1KP52MT/-D1KP53M embedded in metal, use the V680-HS51/-HS52 Antenna. Communications will not be possible with a V680-HS63 Antenna. *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 16 V680 Series Recommended combination RF Tag V680-D1KP54T Antenna V680-HS52 Function Read distance Communication range (unit: mm) RF Tag and Antenna mounting conditions V680-D1KP54T 0 to 17.0 *1 (axis offset ±2) Non-metallic Resin, plastic, wood, etc. Non-metallic Resin, plastic, wood, etc. Non-metallic Resin, plastic, wood, etc. V680-HS52 Write distance 0 to 15.0 *1 (axis offset ±2) *2 V680-HS63 V680-HS63 Read distance Write distance 0 to 24.0 *1 (axis offset ±10) 0 to 20.0 *1 (axis offset ±10) V680-D1KP54T *2 V680-HS65 Non-metallic Non-metallic V680-HS65 Read distance Write distance 0 to 33.0 *1 (axis offset ±10) 0 to 28.0 *1 (axis offset ±10) V680-D1KP54T Metallic V680-D1KP66T V680-HS52 V680-HS63 V680-HS65 Read distance 0 to 17.0 *1 (axis offset ±2) Write distance 0 to 17.0 *1 (axis offset ±2) Read distance 0 to 30.0 *1 (axis offset ±10) Write distance 0 to 25.0 *1 (axis offset ±10) Read distance 0 to 47.0 *1 (axis offset ±10) Write distance 0 to 42.0 *1 (axis offset ±10) V680-D1KP66T Non-metallic Resin, plastic, wood, etc. V680-HS52 *2 Non-metallic V680-HS63 Non-metallic Resin, plastic, wood, etc. *2 V680D1KP66T Non-metallic V680-HS65 Non-metallic Resin, plastic, wood, etc. V680D1KP66T Metallic V680-H01-V2 Read distance 0 to 100.0 *1 (axis offset ±2) Write distance 0 to 100.0 *1 (axis offset ±2) V680-H01-V2 V680-D1KP66T Non-metallic *2 Non-metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The communication range may be reduced if the V680-D1KP66T/-D1KP54T is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z262) for details. *2. The Antenna can be mounted in metal, but the communication range will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 17 V680 Series Recommended combination RF Tag V680-D1KP66MT (flush-mounted on metallic surface: steel) Antenna V680-HS52 V680-HS63 Function Communication range (unit: mm) Read distance 0 to 16.0 (axis offset ±2) Write distance 0 to 14.0 (axis offset ±2) RF Tag and Antenna mounting conditions V680-D1KP66MT V680-HS52 *2 Non-metallic Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 20.0 (axis offset ±10) Metallic V680D1KP66MT *2 V680-HS65 V680-D1KP66T-SP V680-HS52 V680-HS63 V680-HS65 Metallic V680-HS63 Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 20.0 (axis offset ±10) Read distance 0 to 15.0 *1 (axis offset ±2) Write distance 0 to 15.0 *1 (axis offset ±2) Read distance 0 to 25.0 *1 (axis offset ±10) Write distance 0 to 20.0 *1 (axis offset ±10) Read distance 0 to 42.0 *1 (axis offset ±10) Write distance 0 to 37.0 *1 (axis offset ±10) Non-metallic V680-HS65 Metallic V680D1KP66MT Metallic V680-D1KP66T-SP Non-metallic Resin, plastic, wood, etc. V680-HS52 *2 Non-metallic V680-HS63 V680-HS63 Resin, plastic, wood, etc. V680D1KP66T-SP *2 Non-metallic V680-HS65 Non-metallic Resin, plastic, wood, etc. V680D1KP66T-SP Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The communication range may be reduced if the V680-D1KP66T-SP is mounted onto a metallic surface. Refer to the User’s Manual (Cat. No. Z262) for details. *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. High-temperature RF Tag (1-kbyte Memory) Communication Recommended combination RF Tag Antenna V680-HS65 V680-D1KP58HTN V680-H01-V2 Function Communication range (unit: mm) RF Tag and Antenna mounting conditions V680-HS65 Read distance 0 to 55 (axis offset ±10) Write distance 0 to 55 (axis offset ±10) V680-D1KP58HTN Communication range Metal V680-H01-V2 Read distance 0 to 150.0 (axis offset ±10) Write distance 0 to 150.0 (axis offset ±10) Non-metallic material V680-D1KP58HTN Communication range Non-metallic material Non-metallic material 18 V680 Series RF Tag (2-kbyte Memory) Communication Recommended combination RF Tag V680S-D2KF67 Antenna V680-HS52 V680-HS63 Function Communication range (unit: mm) Read distance 0 to 17.0 *1 (axis offset ±2) Write distance 0 to 17.0 *1 (axis offset ±2) Read distance 7.0 to 30.0 *1 (axis offset ±10) Write distance 7.0 to 30.0 *1 (axis offset ±10) RF Tag and Antenna mounting conditions V680S-D2KF67 V680-HS52 *2 Non-metallic V680-HS63 Non-metallic Resin, plastic, wood, etc. V680SD2KF67 *2 V680-HS65 Non-metallic Resin, plastic, wood, etc. Read distance 0 to 42.0 *1 (axis offset ±10) Write distance 0 to 42.0 *1 (axis offset ±10) Non-metallic V680-HS65 Non-metallic Resin, plastic, wood, etc. V680SD2KF67 Metallic V680-H01-V2 Read distance 0 to 100.0 *1 (axis offset ±10) Write distance 0 to 100.0 *1 (axis offset ±10) V680-H01-V2 V680S-D2KF67 *2 V680S-D2KF67M V680-HS52 (flush-mounted on metallic surface: steel) V680-HS63 V680-HS65 Read distance Non-metallic Non-metallic V680S-D2KF67M 0 to 16.0 (axis offset ±2) Write distance 0 to 16.0 (axis offset ±2) Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 25.0 (axis offset ±10) Metallic V680-HS52 *2 Non-metallic V680S-HS63 Metallic V680SD2KF67M *2Non-metallic V680-HS65 Metallic V680SD2KF67M Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). *1. The communication range may be reduced if the V680S-D2KF67 is mounted onto a metallic surface. Refer to the User’s Manual (Cat. No. Z248) for details. *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 19 V680 Series Recommended combination RF Tag V680S-D2KF68 Antenna V680-HS63 V680-HS65 V680-H01-V2 V680S-D2KF68M V680-HS63 V680-HS65 V680-D2KF52M V680-HS51 V680-HS52 V680-HS63 V680-D2KF52M V680-HS51 (embedded in metallic surface: steel) Function Communication range (unit: mm) Read distance 0 to 45.0 (axis offset ±10) Write distance 0 to 45.0 (axis offset ±10) Read distance 0 to 75.0 (axis offset ±10) Write distance 0 to 75.0 (axis offset ±10) Read distance 0 to 150.0 (axis offset ±10) Write distance 0 to 150.0 (axis offset ±10) Read distance 0 to 35.0 (axis offset ±10) Write distance 0 to 35.0 (axis offset ±10) Read distance 0 to 55.0 (axis offset ±10) Write distance 0 to 55.0 (axis offset ±10) Read distance 0.5 to 5.5 (axis offset ±2) Write distance 0.5 to 5.5 (axis offset ±2) Read distance 0 to 8.0 (axis offset ±2) Write distance 0 to 8.0 (axis offset ±2) Read distance 0 to 9.5 (axis offset ±2) Write distance 0 to 9.5 (axis offset ±2) Read distance 0 to 3.5 (axis offset ±2) RF Tag and Antenna mounting conditions V680-HS63 Non-metallic Resin, plastic, wood, etc. Non-metallic Resin, plastic, wood, etc. V680SD2KF68 V680-HS65 Non-metallic Resin, plastic, wood, etc. V680SD2KF68 Metallic V680-H01-V2 Non-metallic Resin, plastic, wood, etc. V680SD2KF68 Non-metallic V680-HS63 Metallic Non-metallic Resin, plastic, wood, etc. V680SD2KF68M V680-HS65 Metallic V680SD2KF68M Metallic V680-D2KF52M V680-HS51 Non-metallic Resin, plastic, wood, etc. Metallic V680-D2KF52M V680-HS52 Non-metallic Resin, plastic, wood, etc. * Non-metallic V680-HS63 Non-metallic Resin, plastic, wood, etc. V680D2KF52M * Non-metallic Metallic V680-HS51 V680-HS52 Write distance 0 to 3.5 (axis offset ±2) Read distance 0 to 3.0 (axis offset ±2) Metallic V680-D2KF52M Metallic V680-HS52 Write distance 0 to 3.0 (axis offset ±2) * Non-metallic V680-D2KF52M Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). * The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 20 V680 Series RF Tag (8-kbyte Memory) Communication Recommended combination RF Tag V680S-D8KF67 Reader Writer V680-HS52 Function Communication range (unit: mm) Read distance 0 to 17.0 (axis offset ±2) Write distance 0 to 17.0 (axis offset ±2) RF Tag and Antenna mounting conditions V680S-D8KF67 V680HS52 Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 V680-HS63 Read distance 7.0 to 30.0 (axis offset ±10) Write distance 7.0 to 30.0 (axis offset ±10) Non-metallic Resin, plastic, wood, etc. V680SD8KF67 Non-metallic V680-HS65 V680-HS65 Read distance 0 to 42.0 (axis offset ±10) Write distance 0 to 42.0 (axis offset ±10) Non-metallic Resin, plastic, wood, etc. Metallic V680-H01-V2 V680-H01-V2 Read distance 0 to 100.0 (axis offset ±10) Write distance 0 to 100.0 (axis offset ±10) V680SD8KF67 Non-metallic V680S-D8KF67M V680-HS52 V680SD8KF67 Read distance V680S-D8KF67M 0 to 16.0 (axis offset ±2) Write distance 0 to 16.0 (axis offset ±2) Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) Non-metallic V680HS52 Non-metallic V680-HS63 Metallic V680-HS63 Metallic V680SD8KF67M Non-metallic V680-HS65 V680-HS65 Read distance 0 to 25.0 (axis offset ±10) Write distance 0 to 25.0 (axis offset ±10) Metallic Metallic V680SD8KF67M Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). 21 V680 Series Recommended combination RF Tag V680S-D8KF68 Reader Writer Function Communication range (unit: mm) RF Tag and Antenna mounting conditions V680-HS63 V680S-D8KF68 Read distance 0 to 45.0 (axis offset ±10) Write distance 0 to 45.0 (axis offset ±10) Read distance 0 to 75.0 (axis offset ±10) Write distance 0 to 75.0 (axis offset ±10) Non-metallic Resin, plastic, wood, etc. V680-HS63 V680-HS65 Non-metallic Resin, plastic, wood, etc. V680-HS65 V680SD8KF68 Non-metallic Resin, plastic, wood, etc. Metallic V680-H01-V2 V680S-D8KF68M V680-H01-V2 Read distance 0 to 150.0 (axis offset ±10) Write distance 0 to 150.0 (axis offset ±10) Read distance 0 to 35.0 (axis offset ±10) Write distance 0 to 35.0 (axis offset ±10) V680SD8KF68 Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 Non-metallic Resin, plastic, wood, etc. V680-HS65 V680SD8KF68M V680-HS63 Metallic V680-HS65 Read distance 0 to 55.0 (axis offset ±10) Write distance 0 to 55.0 (axis offset ±10) V680SD8KF68M Metallic Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User’s Manual (Cat. No. Z248 or Z262). 22 V680 Series Bolt RF Tag (1-kbyte or 2-kbyte Memory) Communication Recommended combination RF Tag Antenna V680-D1KP52M-BT01/ V680-HS51 -BT11 Function Communication range (unit: mm) RF Tag and Antenna mounting conditions V680-D1KP52M-BT01/-BT11 Read distance 0.5 to 2.5 (axis offset ±2) V680-HS51 V680-HS52 Write distance 0.5 to 2.0 (axis offset ±2) Read distance 0.5 to 3.0 (axis offset ±2) Metallic Metallic/Non-metallic V680-D1KP52M-BT01/-BT11 V680-HS52 Write distance 0.5 to 2.5 (axis offset ±2) * V680-D2KF52M-BT01/ V680-HS51 -BT11 Read distance Non-Metallic Metallic/Non-metallic V680-D2KF52M-BT01/-BT11 0.5 to 2.5 (axis offset ±2) V680-HS51 Write distance 0.5 to 2.5 (axis offset ±2) Metallic V680-HS52 Read distance Metallic/Non-metallic V680-D2KF52M-BT01/-BT11 0.5 to 2.0 (axis offset ±2) V680-HS52 Write distance 0.5 to 2.0 (axis offset ±2) * Non-Metallic Metallic/Non-metallic * Mounting can be performed in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 23 V680 Series DeviceNet ID Slave (V680-HAM42-DRT) PROFIBUS ID Slave (V680-HAM42-PRT) ID Flag Sensors (V680-HAM91/-HAM81) RF Tag (1-kbyte Memory) Communication Recommended combination RF Tag V680-D1KP52MT Antenna V680-HS51 V680-HS52 Function Read distance Communication range (unit: mm) RF Tag and Antenna mounting conditions 0.5 to 6.5 (axis offset ±2) Write distance 0.5 to 6.0 (axis offset ±2) Read distance 0.5 to 9.0 (axis offset ±2) Write distance 0.5 to 8.5 (axis offset ±2) Read distance 0.5 to 12.0 (axis offset ±2) Write distance 0.5 to 9.5 (axis offset ±2) Read distance 0.5 to 3.5 (axis offset ±2) V680-D1KP52MT Metallic V680-D1KP52MT V680-D1KP52MT V680-HS51 Non-metallic Resin, plastic, wood, etc. V680-HS52 *2 Non-metallic V680-HS63 (embedded in metallic surface: steel) Non-metallic Resin, plastic, wood, etc. V680-HS51 V680-HS63 Non-metallic Resin, plastic, wood, etc. V680D1KP52MT *2 Non-metallic Metallic V680-HS51 V680-HS52 Write distance 0.5 to 3.0 (axis offset ±2) Read distance 0.5 to 4.5 (axis offset ±2) Metallic V680-D1KP52MT Metallic V680-HS52 V680-D1KP53M V680-HS51 Write distance 0.5 to 4.0 (axis offset ±2) Read distance 0.5 to 6.5 (axis offset ±2) *2 Non-metallic V680-D1KP52MT V680-D1KP53M V680-HS51 V680-HS52 Write distance 0.5 to 6.0 (axis offset ±2) Read distance 0.5 to 9.0 (axis offset ±2) Write distance 0.5 to 8.5 (axis offset ±2) Read distance 0.5 to 3.5 (axis offset ±2) Metallic Non-metallic (Resin, plastic, wood, etc.) V680-D1KP53M V680-HS52 V680-D1KP53M V680-HS51 (embedded in metallic surface : steel) Non-metallic Non-metallic (Resin, plastic, wood, etc.) Metallic V680-HS51 V680-HS52 Write distance 0.5 to 3.0 (axis offset ±2) Read distance 0.5 to 4.5 (axis offset ±2) Write distance 0.5 to 4.0 (axis offset ±2) V680-D1KP53M Metallic Metallic V680-HS52 Non-metallic V680-D1KP53M 24 V680 Series Recommended combination RF Tag V680-D1KP66T Antenna V680-HS52 V680-HS63 V680-HS65 Function Communication range (unit: mm) Read distance 1.0 to 17.0 *1 (axis offset ±2) Write distance 1.0 to 17.0 *1 (axis offset ±2) Read distance 5.0 to 30.0 *1 (axis offset ±10) Write distance 5.0 to 25.0 *1 (axis offset ±10) Read distance 5.0 to 47.0 *1 (axis offset ±10) Write distance 5.0 to 42.0 *1 (axis offset ±10) RF Tag and Antenna mounting conditions V680-D1KP66T Non-metallic Resin, plastic, wood, etc. V680-HS52 *2 Non-metallic V680-HS63 Non-metallic Resin, plastic, wood, etc. V680D1KP66T *2 Non-metallic V680-HS65 Non-metallic Resin, plastic, wood, etc. V680D1KP66T Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User's Manual (Cat. No. Z278 or Z279). *1. The communication range may be reduced if the V680-D1KP66T is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z278 or Z279) for details. *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Recommended combination RF Tag V680-D1KP66MT Antenna V680-HS52 (flush-mounted on metallic surface: steel) V680-HS63 V680-HS65 Function Communication range (unit: mm) Read distance 1.0 to 16.0 (axis offset ±2) Write distance 1.0 to 14.0 (axis offset ±2) Read distance 5.0 to 25.0 (axis offset ±2) Write distance 5.0 to 20.0 (axis offset ±2) Read distance 5.0 to 25.0 (axis offset ±10) Write distance 5.0 to 20.0 (axis offset ±10) RF Tag and Antenna mounting conditions V680-D1KP66MT V680-HS52 *2 Non-metallic Metallic V680-HS63 Metallic V680D1KP66MT *2 Non-metallic V680-HS65 Metallic V680D1KP66MT Metallic V680-D1KP66T-SP V680-HS52 V680-HS63 V680-HS65 Read distance 1.0 to 15.0 *1 (axis offset ±2) Write distance 1.0 to 15.0 *1 (axis offset ±2) Read distance 5.0 to 25.0 *1 (axis offset ±10) Write distance 5.0 to 20.0 *1 (axis offset ±10) Read distance 5.0 to 42.0 *1 (axis offset ±10) Write distance 5.0 to 37.0 *1 (axis offset ±10) V680-D1KP66T-SP Non-metallic Resin, plastic, wood, etc. V680-HS52 *2 Non-metallic V680-HS63 Non-metallic Resin, plastic, wood, etc. V680D1KP66T-SP *2 Non-metallic V680-HS65 Non-metallic Resin, plastic, wood, etc. V680D1KP66T-SP Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User's Manual (Cat. No. Z278 or Z279). *1. The communication range may be reduced if the V680-D1KP66T-SP is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z278 or Z279) for details. *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 25 V680 Series RF Tag (2-kbyte Memory) Communication Recommended combination RF Tag V680S-D2KF67 Antenna V680-HS52 V680-HS63 V680-HS65 Function Communication range (unit: mm) Read distance 1.0 to 17.0 *1 (axis offset ±2) Write distance 1.0 to 17.0 *1 (axis offset ±2) Read distance 7.0 to 30.0 *1 (axis offset ±10) Write distance 7.0 to 30.0 *1 (axis offset ±10) RF Tag and Antenna mounting conditions V680S-D2KF67 Non-metallic Resin, plastic, wood, etc. V680-HS52 *2 Non-metallic V680-HS63 Non-metallic Resin, plastic, wood, etc. V680SD2KF67 *2 Non-metallic V680-HS65 Read distance 5.0 to 42.0 *1 (axis offset ±10) Write distance 5.0 to 42.0 *1 (axis offset ±10) Non-metallic Resin, plastic, wood, etc. V680SD2KF67 Metallic V680S-D2KF67M V680-HS52 (flush-mounted on metallic surface: steel) Read distance V680S-D2KF67M 1.0 to 16.0 (axis offset ±2) Metallic V680-HS52 V680-HS63 Write distance 1.0 to 16.0 (axis offset ±2) Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) Non-metallic *2 V680-HS63 Metallic V680SD2KF67M Non-metallic *2 V680-HS65 V680-HS65 Read distance 5.0 to 25.0 (axis offset ±10) Write distance 5.0 to 25.0 (axis offset ±10) Metallic V680SD2KF67M Metallic V680S-D2KF68 V680-HS63 V680-HS65 V680-HS63 Read distance 5.0 to 45.0 (axis offset ±10) Write distance 5.0 to 45.0 (axis offset ±10) Read distance 5.0 to 75.0 (axis offset ±10) Write distance 5.0 to 75.0 (axis offset ±10) Non-metallic Resin, plastic, wood, etc. Non-metallic Resin, plastic, wood, etc. V680SD2KF68 V680-HS65 Non-metallic Resin, plastic, wood, etc. Metallic V680SD2KF68 Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User's Manual (Cat. No. Z278 or Z279). *1. The communication range may be reduced if the V680S-D2KF67 is mounted onto a metallic surface. Refer to the User’s Manual (Cat. No. Z278 or Z279) for details. *2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 26 V680 Series Recommended combination RF Tag V680S-D2KF68M Antenna V680-HS63 V680-HS65 V680-D2KF52M V680-HS51 V680-HS52 V680-HS63 Function Communication range (unit: mm) RF Tag and Antenna mounting conditions V680-HS63 Read distance 5.0 to 35.0 (axis offset ±10) Write distance 5.0 to 35.0 (axis offset ±10) Read distance 5.0 to 55.0 (axis offset ±10) Write distance 5.0 to 55.0 (axis offset ±10) Read distance 0.5 to 5.5 (axis offset ±2) Write distance 0.5 to 5.5 (axis offset ±2) Read distance 0.5 to 8.0 (axis offset ±2) Write distance 0.5 to 8.0 (axis offset ±2) Read distance 0.5 to 9.5 (axis offset ±2) Write distance 0.5 to 9.5 (axis offset ±2) Metallic Non-metallic Resin, plastic, wood, etc. V680-HS65 Metallic Metallic V680SD2KF68M V680-D2KF52M V680-HS51 V680-HS51 (embedded in metallic surface: steel) Non-metallic Resin, plastic, wood, etc. Metallic V680-D2KF52M V680-HS52 * Non-metallic Resin, plastic, wood, etc. Non-metallic V680-HS63 Metallic Resin, plastic, wood, etc. V680D2KF52M * V680-D2KF52M V680SD2KF68M Read distance 0.5 to 3.5 (axis offset ±2) Write distance 0.5 to 3.5 (axis offset ±2) Read distance 0.5 to 3.0 (axis offset ±2) Metallic Metallic V680-HS51 V680-HS52 Metallic V680-D2KF52M Metallic V680-HS52 Write distance 0.5 to 3.0 (axis offset ±2) * Non-metallic V680-D2KF52M * The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 27 V680 Series RF Tag (8-kbyte Memory) Communication Recommended combination RF Tag V680S-D8KF67 Reader Writer V680-HS52 V680-HS63 V680-HS65 V680S-D8KF67M V680-HS52 (flush-mounted on metallic surface: steel) V680-HS63 Function Communication range (unit: mm) Read distance 1.0 to 17.0 (axis offset ±2) Write distance 1.0 to 17.0 (axis offset ±2) Read distance 7.0 to 30.0 (axis offset ±10) Write distance 7.0 to 30.0 (axis offset ±10) Read distance 5.0 to 42.0 (axis offset ±10) Write distance 5.0 to 42.0 (axis offset ±10) Read distance 1.0 to 16.0 (axis offset ±2) Write distance 1.0 to 16.0 (axis offset ±2) Read distance 6.0 to 25.0 (axis offset ±10) Write distance 6.0 to 25.0 (axis offset ±10) RF Tag and Antenna mounting conditions V680S-D8KF67 V680HS52 Non-metallic V680-HS63 Non-metallic Non-metallic Resin, plastic, wood, etc. V680SD8KF67 V680-HS65 Metallic Non-metallic Resin, plastic, wood, etc. Non-metallic Resin, plastic, wood, etc. V680S-D8KF67 V680S-D8KF67M V680HS52 Metallic Non-metallic V680-HS65 Metallic V680SD8KF67M Non-metallic V680-HS65 V680S-D8KF68 V680-HS63 V680-HS65 Read distance 5.0 to 25.0 (axis offset ±10) Write distance 5.0 to 25.0 (axis offset ±10) Read distance 5.0 to 45.0 (axis offset ±10) Write distance 5.0 to 45.0 (axis offset ±10) Read distance 5.0 to 75.0 (axis offset ±10) Write distance 5.0 to 75.0 (axis offset ±10) Metallic Metallic V680SD8KF67M V680S-D8KF68 Non-metallic Resin, plastic, wood, etc. V680-HS65 V680-HS63 Non-metallic Resin, plastic, wood, etc. V680-HS65 Metallic V680SD8KF68 Non-metallic Resin, plastic, wood, etc. 28 V680 Series Recommended combination RF Tag V680S-D8KF68M Reader Writer V680-HS63 Function Communication range (unit: mm) RF Tag and Antenna mounting conditions V680S-D8KF68M Read distance 5.0 to 35.0 (axis offset ±10) Write distance 5.0 to 35.0 (axis offset ±10) Read distance 5.0 to 55.0 (axis offset ±10) Write distance 5.0 to 55.0 (axis offset ±10) Non-metallic Resin, plastic, wood, etc. V680-HS63 Metallic V680-HS65 V680-HS65 V680SD8KF68M Metallic Metallic Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna. The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their dimensions are larger than the dimensions of the Antenna (100 × 100 mm). For details, refer to the User's Manual (Cat. No. Z248 or Z262). Bolt RF Tag (1-kbyte or 2-kbyte Memory) Communication Recommended combination RF Tag Antenna V680-D1KP52M-BT01/ V680-HS51 -BT11 Function Read distance Communication range (unit: mm) RF Tag and Antenna mounting conditions V680-D1KP52M-BT01/-BT11 0.5 to 2.5 (axis offset ±2) V680-HS51 Write distance 0.5 to 2.0 (axis offset ±2) Metallic V680-HS52 Read distance Metallic/Non-metallic V680-D1KP52M-BT01/-BT11 0.5 to 3.0 (axis offset ±2) V680-HS52 Write distance V680-D2KF52M-BT01/ V680-HS51 -BT11 Read distance 0.5 to 2.5 (axis offset ±2) * Non-Metallic Metallic/Non-metallic V680-D2KF52M-BT01/-BT11 0.5 to 2.5 (axis offset ±2) V680-HS51 V680-HS52 Write distance 0.5 to 2.5 (axis offset ±2) Read distance 0.5 to 2.0 (axis offset ±2) Metallic Metallic/Non-metallic V680-D2KF52M-BT01/-BT11 V680-HS52 Write distance 0.5 to 2.0 (axis offset ±2) * Non-Metallic Metallic/Non-metallic * Mounting can be performed in metal, but the communications distance will decrease compared to mounting in nonmetal. Confirm performance using the actual devices before actual operation. 29 V680 Series Characteristic Data (for Reference Only) Communication range (for Reference Only) ID Controller (using the V680-CA5D0@-V2, CJ1W-V680C11/C12, or CS1W-V680-C11/C12) (unit: mm) 1-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 16 to 18, 23 for communications distance specifications. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) Y Y Y 30 30 X 20 20 –30 –20 –10 0 X 10 10 –40 10 20 30 X V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in non-metallic material) –40 –30 –20 –10 0 10 30 20 20 X 10 –10 0 Write Y Y –20 X Y 30 –30 30 Read Write Read 20 V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) Y –40 Write Read Write Read Y X 10 10 20 30 X V680-HS63 (mounted on non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) –40 –30 –20 –10 0 10 20 30 X Write Read Y Y 30 20 X 10 –40 –30 –20 –10 0 10 20 30 X V680-HS51 (embedded in metallic material) & V680-D1KP53M (embedded in non-metallic material) Write Read –40 –30 –20 –10 Y 30 30 20 20 10 10 0 10 20 30 X –30 –20 –10 –40 –30 –20 –10 0 Y 30 30 20 20 10 10 10 20 30 20 30 X X Write Read Y 0 10 V680-HS52 (embedded in non-metallic material) & V680-D1KP53M (embedded in metallic surface: steel) Write Read Write Read Y V680-HS52 (embedded in non-metallic material) & V680-D1KP53M (embedded in non-metallic material) –40 V680-HS51 (embedded in metallic material) & V680-D1KP53M (embedded in metallic surface: steel) –40 –30 –20 –10 0 10 20 30 X 30 V680 Series V680-HS52 (embedded in non-metallic material) & V680-D1KP54T (mounted on non-metallic material) Write Read –40 –30 –20 –10 V680-HS63 (mounted on non-metallic material) & V680-D1KP54T (mounted on non-metallic material) Y 30 30 20 20 10 10 0 10 20 30 Write Read Y X –40 –30 –20 –10 0 10 20 30 X V680-HS65 (mounted on metallic material) & V680-D1KP54T (mounted on non-metallic material) Write Read Y 100 80 60 40 20 –100 –80 –60 –40 –20 0 20 40 60 80 X V680-HS52 (embedded in non-metallic material) & V680-D1KP66T (mounted on non-metallic material) V680-HS63 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) Write Read 100 80 60 –60 –40 60 X 40 40 20 20 –20 0 Y 100 Y 80 –100 –80 Write Read Y Y 20 40 60 80 –100 –80 X V680-HS65 (mounted on metallic material) & V680-D1KP66T (mounted on non-metallic material) –60 –40 –20 0 X 20 40 60 Write Read 80 X V680-H01-V2 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) Write Read Y Y 100 Y 200 80 150 60 X 100 40 50 20 –100 –80 –60 –40 –20 0 20 40 60 80 X –250 –200 –150 –100 V680-HS52 (embedded in non-metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) 0 Write Read Y –50 50 150 200 X Write Read Y Y Y 100 30 100 V680-HS63 (mounted on non-metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) X 80 20 X 60 40 10 20 –40 –30 –20 –10 0 10 20 30 X –100 –80 –60 –40 –20 0 20 40 60 80 X 31 V680 Series V680-HS65 (mounted on metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) Write Read Write Read Y Y Y 100 30 80 X 20 60 40 10 20 –100 –80 –60 –40 –20 0 20 40 60 80 X –40 V680-HS63 (mounted on non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) –30 –20 –10 Y 80 60 X 40 40 20 20 0 X 100 60 –20 30 Write Read 80 –40 20 Y 100 –60 10 Write Read Y –100 –80 0 V680-HS65 (mounted on metallic material) & V680-D1K66MT (mounted on metallic surface: steel) 20 40 60 80 –100 –80 X –60 –40 –20 0 20 40 60 80 X 1-kbyte Memory Bolt RF Tags V680-HS51 (embedded in metallic material) & V680-HS51 (embedded in metallic material) & V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-D1KP52M-BT11 (mounted in metal/non-metallic material) Y Y Y Y 30 30 20 20 X 10 10 –40 –30 –20 –10 X 0 10 20 30 X –40 –30 –20 –10 0 10 20 30 X V680-HS52 (embedded in non-metallic material) & V680-D1KP52M-BT01 (mounted in metal/non-metallic material) Y Y 30 20 X 10 –40 –30 –20 –10 0 10 20 30 X High-temperature Type 1-kbyte Memory RF Tags V680-HS65 (with metal on back surface) & V680-D1KP58HTN V680-H01-V2 and V680-D1KP58HTN Y Y 200 200 Read Write 150 -250 -200 -150 -100 -50 100 100 50 50 0 50 100 150 200 X Read Write 150 -250 -200 -150 -100 -50 0 50 100 150 200 X 32 V680 Series 2-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 19 to 20, 23 for communications distance specifications. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS63 (mounted on non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-HS65 (mounted on metallic material) & V680S-D2KF67 (mounted on non-metallic material) Write Read Write Read Y Y Y 100 Y 200 80 150 X X 60 100 40 50 20 –100 –80 –60 –40 –20 0 20 40 60 80 –250 –200 –150 –100 –50 X V680-H01-V2 (mounted on non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) 0 50 100 150 200 Write Read X V680-HS52 (embedded in non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) Write Read Y Y Y Y 200 30 150 X 20 X 100 10 50 –250 –200 –150 –100 –50 0 50 100 150 200 X V680-HS63 (mounted on non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) –40 –30 –20 –10 Write Read 0 10 20 30 X V680-HS65 (mounted on metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) Write Read Y Y Y 㼅 100 100 80 80 X –100 –80 –60 –40 60 60 40 40 20 20 –20 0 20 40 60 80 X V680-HS63 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Horizontal) –60 –40 –20 0 20 40 60 Y 100 100 80 –60 –40 80 X 60 60 40 40 20 20 –20 0 20 40 60 80 X V680-HS65 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Horizontal) 150 –60 –40 –20 0 60 80 X Write 150 X 100 50 50 100 150 200 40 Y 200 100 50 20 V680-HS65 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Vertical) Read X 0 X Y Y 200 –100 –80 Write Read Y –250 –200 –150 –100 –50 X Write Read Y Y –100 –80 80 V680-HS63 (with Metal on Back Surface) & V680S-DKF68 (Tag direction: Vertical) Write Read Y –100 –80 㼄 X –250 –200 –150 –100 –50 0 50 100 150 200 X 33 V680 Series V680-H01-V2 (with Non-Metal on Back Surface) & V680S-DKF68 (Tag direction: Horizontal) Write Read Y V680-H01-V2 (with Non-Metal on Back Surface) & V680S-DKF68 (Tag direction: Vertical) Write Read Y Y 250 250 200 200 150 150 X 100 100 50 50 –300 –250 –200 –150 –100 –50 0 Y 50 100 150 200 250 X –300 –250 –200 –150 –100 –50 X 0 50 100 150 200 250 X V680-HS63 (with Metal on Back Surface) & V680-HS63 (with Metal on Back Surface) & V680S-DKF68 (Metal on back: Steel) (Tag direction: Horizontal) V680S-DKF68 (Metal on back: Steel) (Tag direction: Vertical) Write Read Y Write Read Y Y Y 100 100 80 –100 –80 –60 –40 80 X 60 60 40 40 20 20 –20 0 20 40 60 80 X –100 –80 –60 –40 –20 X 0 20 40 60 80 X V680-HS65 (with Metal on Back Surface) & V680-HS65 (with Metal on Back Surface) & V680S-DKF68 (Metal on back: Steel) (Tag direction: Horizontal) V680S-DKF68 (Metal on back: Steel) (Tag direction: Vertical) Write Read Write Read Y Y Y 200 Y 200 150 150 X X 100 100 50 50 –250 –200 –150 –100 –50 0 50 100 150 200 X V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in non-metallic material) –250 –200 –150 –100 –50 0 50 100 150 200 Write Read Y Y Y 30 30 20 20 X 10 –30 –20 –10 0 X 10 10 20 30 X V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in non-metallic material) –40 –30 –20 –10 0 10 Write Read 20 X X 10 10 0 Write 30 20 –10 X Y Y –20 30 Read Y 30 –30 20 V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in metallic surface: steel) Y –40 Write Read Y –40 X V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in metallic surface: steel) 10 20 30 X –40 –30 –20 –10 0 10 20 30 X 34 V680 Series V680-HS63 (mounted on non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in Non-Metal) & V680S-D2KF67 (mounted on non-metallic material) Write Read Y Write Read Y Y 100 Y 30 80 X 20 X 60 40 10 20 –40 –30 –20 –10 0 10 20 30 X –100 –80 –60 –40 –20 0 20 40 60 80 X 2-kbyte Memory Bolt RF Tags V680-HS51 (embedded in metallic material) & V680-HS51 (embedded in metallic material) & V680-D2KF52M-BT01 (mounted in metal/non-metallic material) V680-D2KF52M-BT11 (mounted in metal/non-metallic material) Y Y Y Y 30 30 20 20 X 10 10 –40 –30 –20 –10 X 0 10 20 30 X 30 X V680-HS52 (embedded in non-metallic material) & V680-D2KF52M-BT01 (mounted in metal/non-metallic material) –40 –30 –20 –10 0 10 20 30 X Y Y 30 20 X 10 –40 –30 –20 –10 0 10 20 8-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 21 to 22 for communications distance specifications. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) &V680S-D8KF67 V680-HS63 (mounted on non-metallic material) &V680S-D8KF67 • Read/Write • Read/Write Y Y Y 100 Y 100 80 80 X -100 -80 -60 -40 -20 60 60 40 40 20 20 0 20 40 60 80 X -100 -80 -60 -40 -20 X 0 20 40 60 80 X 35 V680 Series V680-HS65 (mounted on metallic material) &V680S-D8KF67 V680-H01-V2 (mounted on non-metallic material) &V680S-D8KF67 • Read/Write • Read/Write Y Y Y Y 200 200 150 150 X -250 -200 -150 -100 X 100 100 50 50 -50 0 50 100 150 200 X V680-HS52 (embedded in non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) -250 -200 -150 -100 -50 50 100 150 200 X V680-HS63 (mounted on non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) • Read/Write • Read/Write 0 Y Y Y Y 100 30 80 X 20 X 60 40 10 20 -40 -30 -20 -10 0 10 20 30 X -100 -80 -60 -40 -20 0 20 40 60 80 X V680-HS65 (mounted in metal) & V680S-D8KF67M (mounted on metallic surface: steel) • Read/Write Y Y 100 80 60 X 40 20 -100 -80 -60 -40 -20 0 20 40 60 80 X V680-HS63 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Horizontal) • Read/Write V680-HS63 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Vertical) • Read/Write Y Y Y Y 100 100 80 -100 -80 -60 -40 -20 80 X 60 60 40 40 20 20 0 20 40 60 80 -100 -80 X V680-HS65 (mounted on metallic material) & V680S-D8KF68 (Tag direction: Horizontal) • Read/Write -60 -40 -20 X 0 • Read/Write Y X -100 -50 X Y X 100 50 50 -150 80 150 100 -200 60 200 150 -250 40 Y Y 200 20 V680-HS65 (mounted on metallic material) & V680S-D8KF68 (Tag direction: Vertical) 0 50 100 150 200 X -250 -200 -150 -100 -50 0 50 100 150 200 X 36 V680 Series V680-H01-V2 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Horizontal) • Read/Write V680-H01-V2 (mounted on non-metallic material) & V680S-D8KF68 (Tag direction: Vertical) • Read/Write Y Y Y Y 250 250 200 200 150 150 X 100 100 50 50 -300 -250 -200 -150 -100 -50 0 50 100 150 200 250 X -300 -250 -200 -150 -100 -50 X 0 50 100 150 200 250 X V680-HS63 (mounted on non-metallic material) & V680-HS63 (mounted on non-metallic material) & V680S-D8KF68M (Metal on back: Steel (Tag direction: Horizontal)) V680S-D8KF68M (Metal on back: Steel (Tag direction: Vertical)) • Read/Write • Read/Write Y Y Y Y 100 100 80 -100 -80 -60 -40 -20 80 X 60 60 40 40 20 20 0 20 40 60 80 -100 -80 X -60 -40 -20 X 0 20 40 60 80 X V680-HS65 (mounted on metallic material) & V680-HS65 (mounted on metallic material) & V680S-D8KF68M (Metal on back: Steel (Tag direction: Horizontal)) V680S-D8KF68M (Metal on back: Steel (Tag direction: Vertical)) • Read/Write • Read/Write Y 200 Y 150 150 100 100 X 50 -250 -200 -150 -100 -50 Y 200 Y X 50 0 50 100 150 200 X -250 -200 -150 -100 -50 0 50 100 150 200 X 37 V680 Series DeviceNet ID Slave (When Using the V680-HAM42-DRT) PROFIBUS ID Slave (When Using the V680-HAM42-PRT) ID Flag Sensors (When Using the V680-HAM91/-HAM81) 1-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 24 to 25, 29 for communications distance specifications. For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) Write Read Y Y Y 30 30 20 20 X 10 –40 –30 –20 –10 X 10 0 10 20 30 X V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in non-metallic material) –40 –30 –20 –10 0 10 20 Write Read Y 30 20 20 X X 10 10 –10 Write Read Y –20 X Y 30 –30 30 V680-HS51 (embedded in metallic material) & V680-D1KP52MT (embedded in metallic surface: steel) Y –40 Write Read Y 0 10 20 30 X V680-HS63 (mounted on non-metallic material) & V680-D1KP52MT (embedded in non-metallic material) –40 –30 –20 –10 0 Write Read 10 20 30 X V680-HS52 (embedded in non-metallic material) & V680-D1KP66T (mounted on non-metallic material) Write Read Y Y 100 Y 30 80 20 60 X 40 10 20 –40 –30 –20 –10 0 10 20 30 X V680-HS63 (mounted on non-metallic material) & V680-D1KP66T (mounted on non-metallic material) –60 –40 –20 Y X Write 60 X 40 20 20 0 80 100 40 –20 60 80 60 –40 40 Read 80 –60 20 Y 100 –100 –80 0 V680-HS65 (mounted on metallic material) & V680-D1KP66T (mounted on non-metallic material) Write Read Y –100 –80 20 40 60 80 X –100 –80 V680-HS52 (embedded in non-metallic material) & V680-D1KP66T-SP (embedded in non-metallic material) –60 –40 –20 0 20 60 80 X Write Read Write Read 40 V680-HS63 (mounted on non-metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) Y Y Y Y 100 30 X 80 20 X 60 40 10 20 –40 –30 –20 –10 0 10 20 30 X –100 –80 –60 –40 –20 0 20 40 60 80 X 38 V680 Series V680-HS65 (mounted on metallic material) & V680-D1KP66T-SP (mounted on non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) Write Read Write Read Y Y Y 100 30 80 X 20 60 40 10 20 –100 –80 –60 –40 –20 0 20 40 60 80 X –40 V680-HS63 (mounted on non-metallic material) & V680-D1KP66MT (mounted on metallic surface: steel) –30 –20 –10 0 20 30 X Write Read Write Read 10 V680-HS65 (mounted on metallic material) & V680-D1K66MT (mounted on metallic surface: steel) Y Y Y 100 100 80 80 X –100 –80 –60 –40 60 60 40 40 20 20 –20 0 20 40 60 80 –100 –80 X –60 –40 –20 0 20 40 60 80 X 1-kbyte Memory Bolt RF Tags V680-HS51 (embedded in metallic material) & V680-HS52 (embedded in non-metallic material) & V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-D1KP52M-BT01 (mounted in metal/non-metallic material) Y Y Y Y 30 30 20 X 20 10 –40 –30 –20 –10 X 10 0 10 20 30 X –40 –30 –20 –10 0 10 20 30 X 2-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 26 to 27, 29 for communications distance specifications. For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS63 (mounted on non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) V680-HS65 (mounted on metallic material) & V680S-D2KF67 (mounted on non-metallic material) Write Read Write Read Y Y Y 100 Y 200 80 150 X 60 X 100 40 50 20 –100 –80 –60 –40 –20 0 20 40 60 80 X –250 –200 –150 –100 –50 V680-HS52 (embedded in non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) Write Read 0 50 100 150 200 X V680-HS63 (mounted on non-metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) Y Write Read Y Y Y 100 30 80 X 20 X 60 40 10 20 –40 –30 –20 –10 0 10 20 30 X –100 –80 –60 –40 –20 0 20 40 60 80 X 39 V680 Series V680-HS65 (mounted on metallic material) & V680S-D2KF67M (mounted on metallic surface: steel) Write Read Y 100 Y 80 X 60 40 20 –100 –80 –60 –40 –20 0 20 40 60 80 X V680-HS63 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Horizontal) V680-HS63 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Vertical) Write Read Write Read Y Y Y Y 100 100 80 –100 –80 –60 –40 80 X 60 60 40 40 20 20 –20 0 20 40 60 80 X V680-HS65 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Horizontal) –100 –80 –60 –40 –20 X 0 20 Write Read 40 60 X Write Read Y Y Y 200 Y 200 150 150 X X 100 100 50 50 –250 –200 –150 –100 –50 80 V680-HS65 (with Metal on Back Surface) & V680S-D2KF68 (Tag direction: Vertical) 0 50 100 150 200 X –250 –200 –150 –100 –50 0 50 100 150 200 X V680-HS63 (with Metal on Back Surface) & V680-HS63 (with Metal on Back Surface) & V680S-D2KF68M (Metal on back: Steel) (Tag direction: Horizontal) V680S-D2KF68M (Metal on back: Steel) (Tag direction: Vertical) Write Read Write Read Y Y Y Y 100 100 80 –100 –80 –60 –40 80 X 60 60 40 40 20 20 –20 0 20 40 60 80 X –100 –80 –60 –40 –20 X 0 20 40 60 80 X V680-HS65 (with Metal on Back Surface) & V680-HS65 (with Metal on Back Surface) & V680S-D2KF68M (Metal on back: Steel) (Tag direction: Horizontal) V680S-D2KF68M (Metal on back: Steel) (Tag direction: Vertical) Y Y 200 Y 200 150 150 X X 100 100 50 50 –250 –200 –150 –100 –50 Write Read Write Read Y 0 50 100 150 200 X –250 –200 –150 –100 –50 0 50 100 150 200 X 40 V680 Series V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in non-metallic material) V680-HS52 (embedded in non-metallic material) & V680-D2KF52M (embedded in metallic surface: steel) Write Read Y Y Y 30 30 20 20 X 10 –40 –30 –20 –10 0 X 10 10 20 30 X V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in non-metallic material) –40 –30 –20 –10 0 10 20 Write Read Y 30 20 20 X X 10 10 –10 0 Write Read Y –20 X Y 30 –30 30 V680-HS51 (embedded in metallic material) & V680-D2KF52M (embedded in metallic surface: steel) Y –40 Write Read Y 10 20 30 X V680-HS63 (mounted on non-metallic material) & V680-D2KF52M (embedded in non-metallic material) –40 –30 –20 –10 Write Read 0 10 20 30 X V680-HS52 (embedded in non-metallic material) & V680S-D2KF67 (mounted on non-metallic material) Y Write Read Y Y Y 100 30 80 X 20 X 60 40 10 20 –40 –30 –20 –10 0 10 20 30 X –100 –80 –60 –40 –20 0 20 40 60 80 X 2-kbyte Memory Bolt RF Tags V680-HS52 (embedded in non-metallic material) & V680-HS51 (embedded in metallic material) & V680-D2KF52M-BT01 (mounted in metal/non-metallic material) V680-D2KF52M-BT01 (mounted in metal/non-metallic material) Y Y Y Y 30 30 20 20 X 10 –40 –30 –20 –10 0 X 10 10 20 30 X –40 –30 –20 –10 0 10 20 30 X 41 V680 Series 8-kbyte Memory RF Tag The values given for communications ranges are reference values. Refer to pages 28 to 29 for communications distance specifications. For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system. V680-HS52 (embedded on non-metallic material) &V680S-D8KF67 • Read/Write V680-HS63 (mounted on non-metallic material) &V680S-D8KF67 • Read/Write Y Y Y 100 80 80 X -100 -80 -60 -40 60 60 40 40 20 20 -20 Y 100 0 20 40 60 80 -100 -80 X -60 -40 -20 X 0 20 40 60 80 X V680-HS65 (mounted on metallic material) &V680S-D8KF67 • Read/Write Y Y 200 150 X 100 50 -250 -200 -150 -100 -50 0 50 100 150 200 X V680-HS52 (embedded on non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) • Read/Write V680-HS63 (mounted on non-metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) • Read/Write Y Y Y Y 100 30 80 X 20 X 60 40 10 20 -40 -30 -20 -10 0 10 20 30 X -100 -80 -60 -40 -20 0 20 40 60 80 X V680-HS65 (mounted on metallic material) & V680S-D8KF67M (mounted on metallic surface: steel) • Read/Write Y Y 100 80 60 X 40 20 -100 -80 -60 -40 -20 0 20 40 60 80 X 42 V680 Series V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Horizontal) • Read/Write V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Vertical) • Read/Write Y Y Y Y 100 100 80 -100 -80 -60 -40 80 X 60 60 40 40 20 20 -20 0 20 40 60 80 -100 -80 X V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Horizontal) • Read/Write -60 -40 -20 X 0 40 60 80 X V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68 (Tag direction: Vertical) • Read/Write Y 20 Y Y 200 200 150 Y 150 X -250 -200 -150 -100 100 100 50 50 -50 0 50 100 150 200 X V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Horizontal) • Read/Write -250 -200 -150 -100 -50 0 50 100 100 80 -40 -20 80 X 60 60 40 40 20 20 0 20 40 60 80 X -100 -80 V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Horizontal) • Read/Write -60 -40 -20 X 0 Y -50 80 X Y 200 100 X X 50 50 -100 60 150 100 -150 40 Y 150 -200 20 V680-HS65 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Vertical) • Read/Write Y 200 -250 X Y 100 -60 200 Y Y -100 -80 150 V680-HS63 (mounted on metallic surface: steel) & V680S-D8KF68M (Tag direction: Vertical) • Read/Write Y X 0 50 100 150 200 X -250 -200 -150 -100 -50 0 50 100 150 200 X 43 V680 Series Communications Time Communications Time between Antennas and Tags ID Controllers (V680-CA5D0@-V2, CJ1W-V680C11/C12, CS1W-V680C11/12) 1-kbyte Memory RF Tag Communications speed: Normal mode Communications speed: High-speed mode Communications speed (ms) Communications speed (ms) V680-D1KP@ (used in combination with the V680-HS@@ Antenna, V680-HA63A Amplifier Unit and V680-H01-V2 Antenna) V680-D1KP58HTN (used in combination with the V680-H01-V2 Antenna) 2,500 2,000 Write (verify enabled) Write (verify disabled) 1,500 1,000 2,000 1,800 1,600 1,400 Write (verify disabled) 1,200 1,000 400 Read 200 0 200 400 600 800 1,000 1,200 0 Normal mode High-speed mode *1, *2 600 Read 200 400 600 − T=1.3N+31 Enabled T=2.1N+58 Read Write (verify enabled) 800 500 Communications Write Communications time Command verification speed setting N: No. of bytes setting processed 800 1,000 1,200 Bytes Write Disabled T=1.8N+56 − T=1.0N+29 Enabled T=1.8N+51 Disabled T=1.5N+47 Read Write *1. The V680-H01 Antenna cannot be used in high-speed mode. *2. When using multi-access or FIFO communications options, normal-mode communications speed will be used regardless of the high-speed mode setting. Bytes 2-kbyte Memory RF Tag Communications speed: Normal mode Communications speed: High-speed mode Communications speed (ms) Communications speed (ms) V680S-D2KF@@, V680S-D2KF52M/-D2KF52M-BT@@ (used in combination with the V680-HS@@ Antenna, V680-HA63B Amplifier Unit and V680-H01-V2 Antenna) 5,000 4,500 4,000 3,500 Write (verify enabled) 3,000 Write (verify disabled) 2,500 2,000 3,500 3,000 Communications Write Communications time Command verification N: No. of bytes speed setting setting processed Normal mode 2,500 Write Write (verify disabled) 2,000 Read 0 High-speed mode * 1,000 1,500 2,000 0 2,500 Disabled T=1.2N+49 − T=0.9N+27 Write Enabled T=1.7N+49 Disabled T=0.9N+41 * When using multi-access or FIFO communications options, normal-mode communications speed will be used regardless of the high-speed mode setting. 500 500 T=1.2N+30 T=2.4N+49 Read 1,000 1,000 500 − Enabled Read Write (verify enabled) 1,500 Read 1,500 4,000 500 1,000 1,500 2,000 2,500 Bytes Bytes 8-kbyte Memory RF Tag Communications speed: Normal mode Communications speed: High-speed mode Communications speed (ms) Communications speed (ms) V680S-D8KF@@ (used in combination with the V680-HS@@ Antenna and V680-HA63B Amplifier Unit) 3,000 2,500 Write (verify enabled) 2,000 1,500 Write (verify disabled) 1,000 3,000 2,500 Write (verify enabled) 0 Normal mode 2,000 Write (verify disabled) 1,500 1,000 Read Read 500 500 500 1,000 1,500 2,000 2,500 Bytes Communications speed setting 0 500 1,000 1,500 2,000 2,500 High-speed mode * Command Communications time N: No. of bytes processed Read T=0.6N+47 Write (verify enabled) T=1.2N+128 Write (verify disabled) T=0.6N+101 Read T=0.6N+47 Write (verify enabled) T=1.2N+128 Write (verify disabled) T=0.6N+101 * When using V680S-D8KF@@ RF Tag, normal-mode communications speed will be used regardless of the high-speed mode setting. Bytes 44 V680 Series Communications Time (Communications Time between Antenna and RF Tag + Processing Time at Amplifier Unit) DeviceNet ID Slave (V680-HAM42-DRT) PROFIBUS ID Slave (V680-HAM42-PRT) 1-kbyte Memory RF Tags V680-D1KP@@ (V680-HS@@ Antenna) Communications time setting Normal Command V600-compatible mode * 26-byte Access Mode 58-byte Access Mode Read 67 95 137 67 Write with Verification 105 143 210 105 Data Fill High speed Communications time (ms) 4-byte Access Mode V680-HAM42-DRT: 17.5 × No. of processed blocks + 89.2 V680-HAM42-PRT: 20.6 × No. of processed blocks + 76.8 − Read 63 85 117 − Write with Verification 89 128 186 − Data Fill V680-HAM42-DRT: 14.8 × No. of processed blocks + 71.7 V680-HAM42-PRT: 18.8 × No. of processed blocks + 66.4 − 2-kbyte Memory RF Tags V680S-D2KF@, V680S-D2KF52M/-D2KF52M-BT@@ (V680-HS@@ Antenna) Communications time setting Normal Command V600-compatible mode * 26-byte Access Mode 58-byte Access Mode Read 65 92 130 65 Write with Verification 105 142 219 105 Data Fill High speed Communications time (ms) 4-byte Access Mode V680-HAM42-DRT: 17.5 × No. of processed blocks + 89.2 V680-HAM42-PRT: 21.2 × No. of processed blocks + 86.4 − Read 61 81 110 − Write with Verification 86 124 178 − Data Fill V680-HAM42-DRT: 14.8 × No. of processed blocks + 71.7 V680-HAM42-PRT: 17.2 × No. of processed blocks + 74.6 − 8-kbyte Memory RF Tags V680S-D8KF@@ (V680-HS@@ Antenna) Communications time setting Normal Command 26-byte Access Mode 58-byte Access Mode V600-compatible mode *1 Read 42 42 60 42 Write with Verification 133 133 170 133 Data Fill High speed *2 Communications time (ms) 4-byte Access Mode V680-HAM42-DRT: 9.1 × No. of processed blocks + 105.5 V680-HAM42-PRT: 9.1 × No. of processed blocks + 105.5 − Read 42 42 60 42 Write with Verification 133 133 170 133 Data Fill V680-HAM42-DRT: 9.1 × No. of processed blocks + 105.5 V680-HAM42-PRT: 9.1 × No. of processed blocks + 105.5 − *1. The V680-HAM42-PRT does not support V600-compatible mode. *2. When using V680S-D8KF@@ RF Tag, normal-mode communications speed will be used regardless of the high-speed mode setting. 45 V680 Series ID Flag Sensors (V680-HAM91/-HAM81) Operating Mode Communications time (ms) Read Data Read, Verification read 43 50 RF Tag 1-kbyte/2-kbyte Memory RF Tag 8-kbyte Memory RF Tags Write Write, Bit Set, Bit Clear 87 84 Interrogation zone Travel direction RF Tag travel speed (conveyor speed) = Travel distance (D) in interrogation zone Communications time (T) Calculation Example Read Processing Using Combination of V680-D1KP66T and V680-HS63 Y 50 40 30 RF Tag travel speed (m/min) = 20 50(mm) 43(ms) 69(m/min) 10 -60 -40 -20 0 50 mm 20 40 X (Unit: mm) Note: 1. The travel speed depends on factors such as the communications distance Y and axis offset. Therefore, it is recommended to refer to the interrogation zone figure and to perform operation using the widest part of the area. 2. The calculated value is a rough guide. Perform testing with the actual devices before actual operation. 3. This calculation formula does not include communications error processing. 46 V680 Series TAT When Using an ID Controller (Reference Values) TAT (Turn Around Time) TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a response is received. TAT = Command send time + RF Tag communication time + response Command send time: This is the time required for sending a command from the host device to the Controller. It varies depending on the communications speed and format. RF Tag communication time: This is the time required for communication between the Antenna and the RF Tag. Response receipt time: This is the time required for returning a response from the Controller to the host device. It varies depending on the communications speed and format. • For an ordinary command CR RDA1 (Command) RF Tag communication time RD001234 Response CR TAT • Expansion Read Command (Delimiter) CR (Command) CR Host XRA1 ID Controller Command send time Communications time with Tag Frame 1 (Response 1) (Delimiter) CR Frame 2 (Response 2) (Delimiter) CR (Delimiter) CR Frame n-1 (Response n-1) Frame n (Response n) Response reception time TAT • Expansion Write Command (Command) CR Host XWA1 ID Controller CR CR (Response 1) CR CR CR (Response 2) (Response n-1) Command send time XW00 CR (Response n) Communications Response time with Tag reception time TAT 47 V680 Series Safety Precautions WARNING This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. * This catalog is intended only to help select the appropriate product. Be sure to read the User's Manual for usage precautions prior to using the product. Precautions for Safe Use To ensure safety, be sure to follow the following precautions: 1. Do not operate this product in any flammable, explosive, or corrosive gas environment. 2. Do not disassemble, repair, or remodel this product. 3. Tighten the base lock screws and terminal block screws completely. 4. Be sure to use wiring crimp terminals of the specified size. 5. If any cable has a locking mechanism, be sure to check that it has been locked before using it. 6. The DC power supply must be within the specified rating (24 VDC +10%/−15%). 7. Do not reverse the power supply connection. 8. Do not insert water, wire, etc., into any of the gaps in the case. Doing so may cause fire or electric shock. 9. Turn OFF the Controller or ID Sensor Unit power before attaching or removing the Antenna. 10. If multiple Antennas are mounted near each other, communications performance may decrease due to mutual interference. Refer to the manual for the Antennas and RF Tags and check to make sure there is no mutual interference before installation. 11. To remove the ID Controller, catch a tool on the mounting hook and gently remove the Unit. 12. Wire correctly and do not short-circuit the load. The ID Controller may rupture or burn. 13. Do not use in environments that are subject to oil. 14. Never use an AC power supply. 15. In the event that the product exhibits any abnormal condition, immediately stop using the system, turn OFF the power, and contact your OMRON sales representative. 16. Dispose of this product as industrial waste. 17. Be sure to follow any other warnings, cautions, and notices given in this document. Precautions for Correct Use Please observe the following precautions to prevent failure to operate, malfunctions, or undesirable effects on product performance. Installation Site Install the product at a location where: • It is not exposed to corrosive gases, dust, metal chips, or salt. • The ambient operating temperature is within the range stipulated in the specifications. • There are no sudden variations in temperature (no condensation). • The ambient operating humidity is within the range stipulated in the specifications. • No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product. • It is not subject to splashing water, oil, or chemical substances. Installation • The product uses the 13.56-MHz frequency band to communicate with RF Tags. Some devices, such as some motors, inverters, and switching power supplies, generate electromagnetic waves (i.e., noise) that can affect communications with RF Tags. If any of these devices are nearby, communications with RF Tags may be affected or RF Tags may be destroyed. If the product is to be used near such devices, check the effects on communications before using the product. • To minimize the general influence of noise, observe the following precautions: 1. Ground any metallic material located around this device to 100Ω or less. 2. Keep the product away from high voltage and heavy current. • Do not pull on the cable. • Do not use products that are not waterproof in misty environments. • Do not subject the products to chemicals that adversely affect product materials. • When installing the product, tighten screws to the following torque: Controller: 1.2 N·m max ID Sensor Unit: 0.4 N·m V680-HS51 Antenna: 6 N ·m V680-HS52 Antenna: 40 N·m V680-HS63 Antenna: 1.2 N·m V680-HS65 Antenna: 1.2 N·m V680-H01-V2 Antenna: 1.2 N·m (Attach the enclosed Mounting Brackets) V680-D1KP66T/-D1KP66MT: 0.5 N·m V680-D1KP66T-SP: 1.2 N·m V680-D1KP54T: 0.3 to 0.5 N·m V680S-D2KF67/-D2KF67M: 0.6N·m V680S-D2KF68/-D2KF68M: 1.2N·m V680S-D8KF67/-D8KF67M: 0.6N·m V680S-D8KF68/-D8KF68M: 1.2N·m • Do not pull the Antenna connector over the power of 30 N. The Antenna connector may be broken. • Transmission will not be possible if the front and back panels are mistakenly reversed and the Unit is mounted to a metallic surface. V680S-D2KF67M V680S-D2KF68M • The transmission distance will be reduced when the Unit is not mounted to a metallic surface. V680S-D2KF67M V680S-D2KF68M V680S-D8KF67M V680S-D8KF68M • If multiple Antennas are mounted near each other, communications performance may decrease due to mutual interference. Refer to the User's Manual (Cat. No. Z248) and check to make sure there is no mutual interference. • Depending on the operating environment, the case surface may become fogged, but basic performance will not be affected. • When Antenna (only V680-H01-V2) is used in the United States and Canada, the ferrite core (ZCAT3035-1330) of the antenna's attachment is installed on controller's (V680-CA5D01-V@) DC power cable. • The communications range is adversely affected if there is any metal material around the RF Tag. • The maximum communications range can be obtained when the Antenna faces the RF tag directly. When the RF tag is installed at a tilt, the communications range is reduced. Consider the effect of the RF tag at tilt when installing the RF Tag. • Provide the mounting distances between plural RF tags to prevent them from malfunctions due to mutual interference. • If the central axis of an antenna and RF tag shifts, a communications range will fall. 48 V680 Series Communications with Host (V680-HAM91/-HAM81) The I/O status may be unstable when the ID Controller is started. After turning ON the power supply to the ID Controller, allow at least 1 second to elapse before performing control. Storage Store the product at a location where: • It is not exposed to corrosive gases, dust, metal chips, or salt. • The ambient storage temperature is within the range stipulated in the specifications. • There are no sudden variations in temperature (no condensation). • The ambient storage humidity is within the range stipulated in the specifications. • No vibration or shock exceeding the values stipulated in the specifications is transmitted directly to the body of the product. • It is not subject to splashing water, oil, or chemical substances. Cleaning Thinners, benzine, acetone, and kerosine may have adverse effects on resin parts and the case coating. Check the resistance to chemicals in the user’s manual and do not use chemicals that may affect the product. 49 V680 Series (Unit: mm) Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified. Dimensions RF Tag V680-D1KP52MT/-D2KF52M V680-D1KP53M V680-D1KP54T 20 dia. 16 dia. 8 C0.5 10 dia. R0.2 0 –0.1 dia. 6-R0.8 0 5 –0.1 4.5 1.1 Case material PPS resin Case material PPS resin Filling Epoxy resin Filling Epoxy resin V680-D1KP66T/-D1KP66MT 2.7±0.1 Case material PPS resin V680-D1KP66T-SP Mounting Hole Dimensions 4-R4 4-R2.7 25±0.2 Two, M3 4-R6 34 Two, 5.5 dia. (mounting holes) Mounting Hole Dimensions Two, M5 34 25±0.2 32 Two, 6 dia. 32 34 Two, 25±0.2 3.5 dia. 36.5 34 80 25±0.2 3.5±0.1 ±0.2 1.3 Case material PPS resin 80 6.5 2.5 max. V680S-D2KF67/-D2KF67M V680S-D8KF67/-D8KF67M Case material ±0.2 PFA resin 95 2 Two, 3.5-dia. (mounting holes) Mounting Hole Dimensions 40 32±0.2 32±0.2 Two, M3 32±0.2 32±0.2 40 Mounting height 5+1.0 5 0 Case material V680S-D2KF68/-D2KF68M V680S-D8KF68/-D8KF68M PPS resin 5 Two, 4.5-dia. (mounting holes) Mounting Hole Dimensions 54 44±0.2 44±0.2 Two, M4 76±0.2 86 10 76±0.2 Mounting height 10+1.0 0 Case material PPS resin 50 V680 Series V680-D1KP58HTN 10±0.2 1.25 °) (5 7.5 (5° ) 18 dia. 60 dia. 80 dia. 14 dia. 2-R1 V680-D1KP52M-BT01 V680-D2KF52M-BT01 Coating V680-D1KP52M-BT11 V680-D2KF52M-BT11 15-30° PPS resin 15-30° 8.4 dia. M10-P1.5 6 dia. M8-P1.25 C1.5 C1.5 (19.6) (15) 17 0.1 10 9.5 13 0.1 10 7 21.6 19.1 Antenna with Detachable Amplifier Unit V680-HS52-W Two toothed washers Two mounting nuts M22×1 Operation indicator 35 dia. Insulated cover 30 50 Cable length 37 14.5 dia. 19.8 dia. 16.5 dia. 16.8 dia. 7 30 Mounting Hole Dimensions 22.5 dia. Connector 5.5-dia. coaxial cable 47.6 50 57 65 L dimension 2m 2,000 +100 −50 12.5 m 12,500 +200 −50 Ferrite core Case material L Brass Communication ABS resin surface V680-HS52-R Two toothed washers Two mounting nuts M22×1 Operation indicator 35 dia. Insulated cover 50 30 20 14.5 dia. 19.8 dia. 16.5 dia. 7 30 Mounting Hole Dimensions 22.5 dia. V680-HS51 10 47.6 50 57 65 Ferrite core Epoxy resin Cable PVC Cable length L dimension 2m 2,000 +100 −50 12.5 m 12,500 +200 −50 Connector L Toothed washer Two mounting 12 nuts M12×1 21 dia. 16.8 dia. 5.3-dia. coaxial cable Ferrite core Filling Case material Brass Communication ABS resin surface Filling Epoxy resin Cable PVC Case material Brass Connector 26.2 (14.5 dia.) (16.8 dia.) 9.6 dia. 25 7 24 33 35 17 50 Coaxial cable, 2.9 dia., Standard length: 2 m 2,000 +200 -50 Mounting Hole Dimensions 12.5 dia. Insulated cover Communication ABS resin surface 12.8 Filling Epoxy resin Cable PVC 51 V680 Series V680-HS63-W L Insulated cover 30 40 28±0.1 37 14.5 dia. 5 16.8 dia. 5.5-dia. coaxial cable 16.5 dia. 27 5 50 6 Connector Ferrite core 53 Operation indicator Mounting Hole Dimensions Two, M4 or 4.5 dia. 23 Center of coil 11 27 ±0.2 V680-HS63-R Cable length L dimension 2m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material ABS resin Filling Epoxy resin Cable PVC Cable length L dimension L Insulated cover 30 20 50 40 28±0.1 14.5 dia. 5 5 10 16.8 dia. 5.3-dia. coaxial cable Ferrite core 16.5 dia. 27 6 53 Operation indicator Connector Mounting Hole Dimensions Two, M4 or 4.5 dia. 23 11 Center of coil 27 ±0.2 V680-HS65-W Ferrite core Connector 25 100 90±0.2 37 16.5 dia. 14.5 dia. 16.8 dia. Bushing 50 30 5.5-dia. coaxial cable 10 30 20 V680-HS65-R 11 Four, 4.5-dia. (Mounting holes) 50 25 100 Connector 16.5 dia. 14.5 dia. 16.8 dia. 90±0.2 Bushing 30 10 ABS resin Filling Epoxy resin Cable PVC Cable length L dimension 2m 2,000 +100 −50 12.5 m 12,500 +200 −50 Case material ABS resin Filling Epoxy resin Cable PVC (gray) Cable length L dimension 30 11 2m 2,000 +100 −50 12.5 m 12,500 +200 −50 50 5.3-dia. coaxial cable 10 20 Case material Ferrite core (39.5) 50 14 12,500 +200 −50 L 100 90±0.2 5 5 Operation indicator Insulated cover 10 14 12.5 m Four, 4.5-dia. (Mounting holes) 50 50 Operation indicator 2,000 +100 −50 L 100 90±0.2 5 5 2m Insulated cover Case material ABS resin Filling Epoxy resin Cable PVC (black) 52 V680 Series Antenna with Built-in Amplifier Unit V680-H01-V2 Mounting Hole Dimensions Connector Coil core 185±0.2 5.8-dia. vinyl-insulated round cable Communication surface Four, M4 or 4.5 dia. 142.5 235±0.2 12 operation indicators (LEDs) Four, 5-dia. (Mounting holes) Ferrite core 200 (25 dia.) 65 50 20 dia. 185 Setting switch cover 64.8 14 6 30 38 4 mounting brackets (enclosed) 142.5 235 250 Communication surface 7.5 (17) 500 +50 0 (45) (1) 40 13.5 Case material PC/ASA resin Filling Aluminum Cable PVC Cable length L dimension Amplifier Unit V680-HA63A/-HA63B Operation indicator 13.7 65 L 18 51 12.8 dia. 9.5 dia. 36 15 dia. 40 Connector Connector 500 +100 −50 5m 5,000 +100 −50 10 m 10,000 +200 −100 25 25 25 0.5 m 15 35.6 3.5 5.8-dia. vinyl-insulated round cable (2 conductors: 41/0.16 dia., 8 conductors: 17/0.08 dia.) Case material PC resin Filling Epoxy resin Cable PVC 53 V680 Series ID Controller V680-CA5D01-V2/-CA5D02-V2 Mounting Hole Dimensions Two, M4 65 80±0.2 (80) Switch cover Two, 4.5-dia. (Mounting holes) Monitor display 105 5 95±0.2 95 Antenna connector 18 90 80 17.5 5 7.5 ID Sensor Units CS1W-V680C11 CJ1W-V680C11 Six operation indicators 4.5 2.7 0 Switches 1 130 18.1 90 17.3 4.7 2.7 123 Switches 65 Six operation indicators Connector Connector 31 101 35 CJ1W-V680C12 CS1W-V680C12 Eight operation indicators 123 Eight operation indicators 2.7 4.5 Switches Switches 65 0 4.7 90 1 130 18.1 25 17.3 51 29.2 Connectors 2.7 31 8 3.6 Connectors 15 Terminals 35 101 With cover mounted: 16.5 Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave) V680-HAM42-DRT V680-HAM42-PRT Operation indicators 65 20 10 5 5 1.5 Operation indicators 5 Data indicators 65 20 10 2 2 .6 3 5 .2 65 20.5 DeviceNet connector 18 21.5 5.06 2 2 .6 3 5 .2 65 12 ( 3 .7 ) Antenna connector Mode switch Node address switches 12 6 18.25 PROFIBUS connector Power supply connector 18 21.5 5.1 ( 3 .7 ) Power supply connector 65 4 1 .8 32.5 42 28.5 28.5 Case material 12 Antenna connector 65 35 5 Data indicators 4 16 Mode switch 12 6 5 1.5 4 16 Node address switches 5 PC+ABS resin Case material PC+ABS resin 54 V680 Series Amplifier-integrated Controllers (ID Flag Sensors) V680-HAM91/-HAM81 74.8 71.8 65.75 61.75 4 switches 8 .7 30 1 4 .7 4 4 switches 18.95 21 operation indicators 7 × 2 .1 = 1 4 .7 38.5 30.25 41.55 52.85 108.26 90 Connector Connector 65 12 (5.5) Case material PC+ABS resin Case material ABS resin Cable PVC Handheld Reader Writer V680-CHUD 45 Operation indicator Activate switch 11 65 160.5 10.5 Dimension L 800 60 1900 60 25.5 23 L 33 23 3.8-dia. vinyl-insulated round cable Standard length: 0.8 or 1.9 m Antenna Ferrite core V680-CH1D Activate switch Reset button Operation indicator 25.5 23 11 45 65 3.8-dia. vinyl-insulated round cable Standard length: 2.5 m 48 2500±60 Ferrite core 160.5 Antenna 44.9 10.5 33 23 24.99 32.2 1.8-dia. × 2 vinyl-insulated flat cable Standard length: 0.19 m Connector 19 0± 20 Connector 13 dia. 45 V680-CH1D-PSI ABS resin Cable PVC Activate switch Reset button Operation indicator 25.5 23 11 45 65 Antenna Case material 3.8-dia. vinyl-insulated round cable Standard length: 2.5 m 48 160.5 800 +50 -110 10.5 33 23 44.9 24.99 32.2 Ferrite core Connector Case material ABS resin Cable PVC 55 V680 Series Interface Cables (Sold Separately) V680-A60 2M/5M/10M Connector: XG5M-2632-N 320 20±5 L +50 0 20±5 20±5 35±5 20±5 14.4 1 6.1 3 7 .6 9-dia. round insulated vinyl cable, 23 conductors (7/0.2 dia.: AWG24) Note: The connectors are not waterproof. Cable length L dimension 2m 2,000 5m 5,000 10 m 10,000 AC Adapter V600-A22 45.5 1800 ± 100 33 unifibe.com 23.5 9.5 ± 0.3 4.1 dia. 56 V680 Series Accessories V680-D1KP66T Attachments V600-A86 4-R5.5 25±0.2 Mounting Hole Dimensions Two, 4-dia. Two, M3 37 34 15 25±0.2 25±0.2 16 25±0.2 4 15 34 37 3.5 10 V680-D8KF68/-D32KF68 Attachments V680-A81 Two, 4.5-dia. Case material PPS resin Case material PBT resin Filling Epoxy resin Mounting Hole Dimensions mounting holes 54 44±0.2 44 Two, M4 76±0.2 86 76 10 V680-D1KP58HTN Attachments V680-A80 17 Mounting Hole Dimensions 12 dia. 20 dia. M12 M12 3.2 dia. 11.5 15 40 50 110 V680-D1KP54T Attachments V700-A80 Material Stainless steel Material PPS resin Mounting Hole Dimensions 40 Two, M3 Two, 6-dia 22 Two, 3.5-dia 31±0.2 31±0.1 3.5 1.5 5 8 1 22 Amplifier Unit Special Extension Cable V700-A40 2M 49 V700-A41 3M V700-A42 5M V700-A43 10M 15.5 dia. V700-A44 20M V700-A45 30M L 51 Cable length 2m 15 dia. 3 m 5m 10 m 6 dia. 20 m Connector to ID Controller 30 m 6-dia. vinyl-insulated Connector to Amplifier Unit Connection label round cable V680-H01 Special Cables V700-A40-W 2M V700-A40-W 5M V700-A40-W 10M V700-A40-W 20M 20 dia. V700-A40-W 30M 41.8 L Material 49 15 dia. Connector to ID Controller Connector to R/W Head 6-dia. vinyl-insulated round cable Connection label Cable length 2m 5m 10 m 20 m 30 m Material L dimension 2,000±100 3,000±100 5,000±100 10,000±100 20,000±100 30,000±100 PVC L dimension 2,000±100 5,000±100 10,000±100 20,000±100 30,000±100 PVC 57 V680 Series Related Manuals Einglish Man.No. Japanese Man.No. Model Name Z248 SCHI-707 V680-HA63B/HS5@/HS6@/H01-V2/D2KF@@(M)(-BT@1), V680S-D2KF@@(M)/D8KF@@(M) V680 series Amplifiers/Antennas/RF Tags (FRAM) User's Manual Z249 SCHI-708 V680-CA5D01-V2/CA5D02-V2 V680 series ID Controller User's Manual SCHI-709 V680-HA63A/HS5@/HS@/H01-V2/D1KP@@M(T)(-BT@1)/ D1KP@@T(-SP)/D1KP58HT V680 series Amplifiers/Antennas/RF Tags (EEPROM) User's Manual Z271 SCHI-711 CS1W-V680C11/-V680C12, CJ1W-V680C11/-V680C12 CJ/CS series ID Sensor Units User's Manual Z278 SCHI-714 V680-HAM42-DRT V680 series DeviceNet ID Slave User's Manual Z279 SCHI-715 V680-HAM91/HAM81 V680 series ID Flag Sensors User's Manual Z272 SCHI-712 V680-CHUD/CH1D/CH1D-PSI V680 series Hand-held Reader Writer User's Manual Z268 SCHI-710 V680-HAM42-FRT V680 series FL Remote ID User's Manual Z320 V680-HAM42-PRT/HS63-W/HS65-W/D1KP66(M)T/ SDGR-704 D1KP58HTN, V680S-D2KF@@(M)/D8KF@@(M) Z262 V680 series PROFIBUS ID Slave User's Manual Z317 SDGR-703 CJ1W-V680C11/-V680C12 CJ series ID Sensor Units Operation Manual (NJ-series) Z339 SDGR-709 V680S-HMD64-ETN/HMD66-ETN V680S series User's Manual 58 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2017.6 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2017 All Right Reserved.