Vaporella Advanced_system

Transcript

Advanced System N G C I H J P W K X B R L V.lla ADVANCED SYSTEM - M0S06060 - Edizione 1H10 O M E J1 F Q D A ENGLISH Vaporella Advanced System Advanced System A) Tank cap O) Opening lever B) Main switch P) C) Board main switch D) Power supply cable Function switch: O heating system I blow function + heating II suction + heating E) Monoflex (power and steam) Q) Supply cable storage F) Iron rest R) Safety screw G) Iron temperature control S) H) Steam on/off button S1) Safety device for connector (fig. 10) J) Continuous steam jet button T) Vaporella connector (fig. 10) J1) “Iron heating” indicator light V) Iron fixing belt (fig. 8) K) Pressure indicator light W) Vaporella lock pivot I) KalFilter X) L) Wheels M) Flex holder N) Ironing surface Board connector (fig. 10) Vaporella lock support Polti S.p.A. reserves the right to change equipment or accessory specification without prior notice. Vaporella Advanced System ENGLISH Dear Customer, thank you for the confidence you have placed in Polti buying this product. Vaporella Advanced System is an ironing system designed for domestic use; its ironing board is provided with a heated suction and blowing surface in order to obtain at home professional ironing results. Vaporella allows you to achieve perfect ironing, saving time and effort. With professional iron it is not necessary to press or iron over repeatedly but just let the iron slide gently over the fabric. Due to its pressure, Vaporella’s steam penetrates into the fibres of the fabric clearing any creases at its first pass. The steam power is so strong that you can even iron more than one side of a fabric at a time (making ironing sheets for example many times faster) The ironing board has a sturdy and solid metal structure, an easy height adjustment device and a broad working surface, providing the perfect complement to the irons powerful steam. The heating function dries the fabrics and makes the ironing easier, faster and effortless. The suction keeps the fabric sticked to the board, preventing the formation of creases which rise up easily with other ironing boards. The airing function inflate delicate fabrics so that it is possible to iron over with steam power only. Vaporella Advanced System helps you to work safely. This product conforms with very strict regulations. Moreover, Vaporella is easy to use and has an unlimited operating time. Please read these usage instruction carefully before using this product, we hope you enjoy using your Vaporella! This unit conforms with EC-directives 89/336 as amended by 93/68 (EMC) and 73/23 as amended by 93/68 (low voltage). ENGLISH Vaporella Advanced System PLEASE READ THE FOLLOWING BEFORE USE • Before using your Vaporella carefully read these usage instructions. • Before connecting Vaporella to the mains make sure that the current is the same as indicated for the machine and that the plug is an earthed plug. • Do not put any detergent or chemical substance in the water tank. • Do not place the appliance in water or in any other liquids. • Do not touch the appliance with wet hands or feet whilst the appliance is connected to the mains. • Never leave the appliance unattended whilst it is connected to the mains. • Do not allow Vaporella to be used by children or by people who are not familiar with the usage instructions. • We recommend that the appliance is disconnected from the mains whenever it is not in use. • Do not leave the appliance exposed to wind or rain. • Do not lay the hot appliance on surfaces sensitive to heat. • Do not use electric extension leads that are not authorized by the manufacturer, as they may cause damage or fire. • Never direct the jet of steam towards people, animals. Never direct the jet of steam towards small particles of debris without towards small particles of debris without the user's eyes. • ATTENTION: if you iron sitting down, do not place your legs under the ironing board, the steam can cause burns. • Activate the automatic closing hook lever (O) only if the board is resting horizontally on the ground; pay attention during board opening and closing procedures and always guide the board up from the floor. • If in the future you need replace the ironing board fabric cover or the lining, always be sure that the replacement is permeable to humidity. Humidity resistant fabrics can be damaged by heat or moisture. • WARNING: to avoid problems created by limscale, it is essential to use KalFilter jug. I M P O R TA N T Before leaving our factory all our products are rigorously tested. Vaporella may still contain some water in its tank. Vaporella Advanced System ENGLISH P R E PA R AT I O N F O R U S E 1a. Rest the board on the floor. 2a. To open the ironing board, just pull the ironing surface upwards keeping a foot on Vaporella side leg of the board until locking takes place (fig. A). To adjust height, unfasten the lever (O) and move the board upwards or downwards. NOTE: Because of the weight of the ironing surface, during closing and height adjustment hold the board with both hands. 3a. Insert the flex holder (M) in its location (fig. 1). 4a. Place the cable (iron power supply - steam tube) (E) in its support (fig. 2). 5a. Unscrew the tank cap (A) and fill the tank with approx. 800 cc. water, preventing overflowing, then screw the cap on again. Water by its nature contains magnesium and mineral salts which form into limescale. To avoid this residue causing problems to your unit, we recommend that you always use this special jug KalFilter with anti-limescale filter, which is provided with your appliance thanks to its special filter made up with a mixture of two resins. This jug, is the ideal solution to the problem of limescale allowing you to change water straight from the tap into water that is demineralized and silicon-free. In this way you can prevent the incrustations and protect the components of your unit. Constant use of the jug extends the life to your appliance and you will always have at your disposal a clean jet of steam To use the jug correctly, please read carefully the instructions provided with this item. 6a. Connect the power supply cable (D) into an earthed power supply of the correct voltage. 7a. Press the main switch (B); the steam pressure indicator (K) and the “iron heating” indicator light (J1) will light up (fig. 4). 8a. To operate the board, turn the main switch (C) on. In this way the board heater will start operation. Wait a few minutes to allow the heater to reach working temperature. It is now possible to activate blowing and suction features: Fig. A Fig. 1 Fig. 2 Fig. 3 ENGLISH Vaporella Advanced System 9a. BLOWING: By pushing the function switch (P) on posi- Fig. 4 tion (I), the board will allow you to swell the clothes with a “hot blow”, in order to be able to gently skim with the iron the most delicate clothes, ironing them with steam only. 10a.SUCTION: By pushing the function switch (P) on position (II), the board will hold the clothes to the surface and eliminate the residual humidity. Note: to avoid condensation inside the ironing board we recommend you always use the suction function while steam ironing. The sound emitted on switching on your appliance and periodically during use, is due to the water refilling system and is quite normal. During use you may hear some gurgling due to the backflow of hot water into the tank saving energy (water preheating in the tank). This is quite normal and you can carry on ironing. To reduce the gurgling we recommend to replenish before the water has been used up. At first steam request, or about 2 minutes after the last request, you will experince a delay in steam delivery because steam inside the heat exchanger is excessively rarefied. This is normal and no longer happens once the equipment has been used a number of times. Press the steam release switch (H) for some seconds till steam is released. INSTRUCTIONS FOR USE Fig. 5 STEAM IRONING 1b. Set the iron temperature to the “COTTON - LINEN” steam position (fig. 5), by turning the knob (G). All types of fabric can be ironed at this temperature. 2b. Wait for the steam pressure indicator light (K) and the “iron heating” indicator light (J1) to switch off (about 3 minutes). Push button (H) on the iron to release bursts of steam from the holes on the soleplate. Release the button and the steam will stop (fig. 6). NOTE: during initial operation of the iron, a few drops of water mixed with steam may come out of the soleplate until the temperature stabilises. It is advisable to direct the first jets of steam onto an old cloth until a uniform stable jet of steam is obtained. Fig. 6 ➠ Vaporella Advanced System Fig. 7 ➠ 3b. In order to have a continuous steam jet, move the button (J) forwards. Steam will keep on coming out, even releasing the button (H). To interrupt the outlet, move the button (J) backwards (fig. 7). ENGLISH ➠ DRY IRONING 1c. For DRY ironing (without steam), adjust the temperature by turning the knob (G), setting it to the temperature required for the fabric, as shown on the rotating indicator. When dry ironing, be careful NOT TO PRESS THE STEAM RELEASE BUTTON (H) on top of the iron, otherwise water may leak from the soleplate of the iron. F I L L I N G T H E TA N K It is necessary to refill the feeder tank with water before it becomes empty. If no steam is released when requested, and at the same time a higher-pitched noise is heard from the pump, this signifies that the tank is out of water. To keep on working, simply restore the water level in the feeder tank as described in the “Preparation for use” paragraph. Fig. 8 HOW TO CLOSE THE MACHINE NOTE: Before putting the board away, keep the board heater (C) on for a few minutes to dry any ironing condensation. 1d. Turn off switches (B-C-P). 2d. Disconnect the supply plug. Wind the power supply cable (D) around its support (Q). 3d. Pull the opening lever (O) upwards and guide the board (N) downwards. NOTE: Because of the weight of the ironing surface, during closing and height adjustment hold the board with both hands. 4d. To put away the ironing board vertically closed, it is suggested to put the iron on its rest (F) securing it with the ironing fixing belt (V), fastened to the support device (fig. 8). 5d. The appliance stands vertically (fig. 9). Fig. 9 ENGLISH Vaporella Advanced System VA P O R E L L A C O N N E C T I O N / D I S C O N N E C T I O N TO THE BOARD For cleaning and maintenance operations, it is possible to separate Vaporella from the board as follows: • Unfasten the safety device (S1) on the board connector (S) and separate Vaporella connector (T) from board connector (S) (fig. 10). • Unscrew the safety screw (R). • Pull Vaporella outwards, so as to unlock the pivot (W) placed on Vaporella back from the board support (X) (fig. 11), • Lift Vaporella up • Turn Vaporella so that it can be unlocked from the ironing board as shown in fig. 12. • To connect Vaporella to the ironing board again, proceed in the opposite way from what stated above. NOTE: During connection and disconnection operations, make sure that the cable (D) is not wound around its support (Q) and that the cap (A) is secured to prevent water leaking. Fig. 10 S1 S T Fig. 11 W X Fig. 12 TRANSPORT The board can be easily transported thanks to its wheels (L); hold it on the side facing Vaporella, lift it and push it (fig.13). I M P O R TA N T Fig. 13 • Do not leave the iron unattended whilst connected to the mains. • The lights (K) and (J1) go on and off during operation, this is perfectly normal, indicating that the electric resistances are operating to maintain the New Concept system at a constant temperature. This indicates the machine maintaining the correct and constant pressure and is quite normal. • If no steam is released from the iron, check the following: the switch (K) is lit up; there is water in the tank. • If repairs or replacement parts are required. Vaporella Advanced System ENGLISH • The appliance is fitted with a safety thermostat, which should only be replaced by an authorised technician. • If it is necessary to replace the power supply cable, please refer to the nearest Polti authorised service centre, since the use of special tool is necessary. • If you accidentally drop your iron, you should have it checked by an authorized Polti Service Centre because some internal malfunctionings might have occured, limiting the safety of the product. • In the case of breakdown or malfunction do not attempt to repair the appliance yourself but refer to your nearest authorised service centre. C A R E O F Y O U R VA P O R E L L A • Before attempting any maintenance operation, be sure to always disconnect the appliance from the mains. • To clean the body of the appliance, simply use a moist cloth. Do not use solvents or detergents which may harm the body material. AT T E N T I O N This appliance is built according to current regulations for recycling. Do not throw the packing materials used to protect the appliance during transportation, but take them to relevant collecting centers. • Polti declines liability for any damage or accident derived from any use of VAPORELLA which is not in conformity with the instructions contained in this booklet. ENGLISH Vaporella Advanced System FOR YOUR OWN SAFETY READ FOLLOWING INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO CONNECT THIS UNIT TO THE MAINS. M A I N S ( A C ) O P E R AT I O N ( o n l y U . K . ) This unit is designed to operate on 240V, 50 Hz current only. Connecting it to other power sources may damage the unit. WARNING - This appliance must be earthed. This appliance may be fitted with a non rewirable plug, if it is necessary to change the fuse in a non rewirable plug the fuse cover must be refitted. If the fuse cover is lost or damaged, the plug must not be used until a replacement, available from the appliance manufacturer, is obtained. It is important that the colour of the replacement fuse cover corresponds with the colour marking on the base of the plug. If the plug requires to be changed because it is not suitable for your socket, or becomes damaged, it should be cut off and an appropriate plug fitted following the wiring instruction (below). The plug removed must be disposed of safely as insertion into a 13A socket is likely to cause an electrical hazard. GREEN & YELLOW (Earth) FUSE (13 amp) BLUE (Neutral) BROWN (Live) IMPORTANT This wires in this mains lead are coloured in accordance with the following code. • Green-and-yellow: Earth • Blue: Neutral • Brown: Live As the colours of the wires in the mains leads of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter “E” or by the earth symbol or green-and-yellow. The wire which is coloured blue must be connected to the terminal which is marked with the letter “N” or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter “L” or coloured red.