Variable Nozzle Turbine Analyser

Transcript

Variable Nozzle Turbine Analyser Technical Information INDEX INTRODUCTION Introduction 2 Characteristics 3 Technical Requirements 3 Diagram 4 VNT Tests 7 TurboClinic’s VNT is the most advanced equipment to adjust turbocharger variable nozzles with pneumatic or electronic actuators. It enables to set the correct position of the variable nozzle vanes and consequently the correct minimum and maximum flow of the turbocharger. The use of “artificial vision” to adjust the pneumatic actuator is an exclusive TurboClinic technological feature. The ergonomics and the innovative design applied to the VNT also make it the most advanced equipment on the market. As with all our equipment, TurboClinic has also developed an intuitive and simple software to improve the user’s experience when using the equipment. Add-ons 7 The VNT database includes hundreds of turbochargers’ references and by \\ Actuator Tester connecting the equipment to the company’s internet network, you can benefit \\ Test PVF Sensor from our constant updates. Thanks to the VNT networking capabilities, TurboClinic \\ Test N75 Valve can provide you with remote and efficient real-time technical support. \\ Actuator Programmer \\ Oil Leak Tester \\ Testing Turbocharger 2 CHARACTERISTICS DIAGRAM \\ Touch Screen 21,5’ VNT \\ Front - Top \\ RJ45 LAN Connection \\ Use of the existing compressed Air Network (between 8 and 10 BAR) 1\ 21,5’ Touch screen 2\ Power button \\ 230V - 320W \\ Built-in EAT functions \\ Connection with Electronic Actuators \\ Connection with Vacuum Actuators 1 2 \\ Single Power ON/OFF Button \\ Automatic Purge TECHNICAL REQUIREMENTS \\ RJ45 LAN Connection - Internet - to get the latest updates and remote support \\ Compressed Air Network (between 8 and 10 BAR) \\ Power Supply 230V - 320W \\ Air Filter* - to prevent that impurities in the air network may interfere with the VNT’s pneumatic systems \\ Oil Lubricator* - to help maintaining the valves clean and lubricated * Not included 3 4 DIAGRAM DIAGRAM VNT \\ Front - Bench top VNT \\ Back 3\ Connection for vacuum actuators 4\ Connection for electronic actuators 5\ Camera’s USB connection 6\ Turbo support base 7\ Emergency Stop button 8\ Plug to connect the network cable RJ45* 9\ Plug to connect the power supply cable to the 230V~50Hz 10\ Air Inlet - Lubricated Air (it is mandatory to connect the air supply to an external oil lubricator and an air filter)* 11 \ Purge (Don’t connect anything) * Not included 3 7 8 4 9 10 5 6 11 5 6 VNT TESTS Testing Turbocharger \\ Leak Test \\ Minimum Flow (For Vacuum and Electronic Actuators*) \\ Maximum Flow (For Vacuum and Electronic Actuators*) \\ Actuator Test (For Vacuum and Electronic Actuators*) * Only for clients with this option VNT’s ADD-ONS \\ Actuator Tester \\ Test PVF Sensor \\ Test N75 Valve \\ Actuator Programmer \\ Oil Leak Tester 7