Preview only show first 10 pages with watermark. For full document please download

Vcb Artisan/series M Spring-operated Video Conferencing Background By Draper Installation/operating Instructions Caution ➀

   EMBED

Share

Transcript

Installation/Operating Instructions VCB Artisan/Series M Spring-Operated Video Conferencing Background by Draper Caution ➀ Read instructions through completely before proceeding. ➁ Follow instructions carefully. Installation contrary to instructions invali- Ceiling Installation (See Fig. 3): Install through the two 5/16" diameter mounting holes at each end of the case, using appropriate fasteners. dates warranty. ➂ Unit should be accessible for complete removal should fabric become Eyebolt by Draper damaged or should other service be required. ➃ Unit should be installed level (using a carpenter’s level). ➄ Nothing should be fastened to dowel or background. NOTE: Unit has been thoroughly inspected and tested at factory and found to be operating properly prior to shipment. Hanging Screen General (See Fig. 1): When locating viewing surface and checking clearance for operation, remember background is centered in case. The Artisan’s furniture-quality case should always be handled carefully to avoid scratching and protect its finish. Regardless of mounting method, unit should be positively and securely supported so that vibration or even abusive pulling on the background will not cause case to work loose or fall. Installer must insure that fasteners used are of adequate strength and suitable for mounting surface chosen. Z-brackets included for wall mounting. Hardware by others. Z-brackets on rear of case. Case Figure 3 Case Dimensions Background Width + C A Eye bolt supplied with screen B* ¼-24 T-nut for ceiling mounting. 1 each end. D Wall Left end Figure 1 Wall Installation (See Fig. 2): Mount 2, 3 or 4 aluminum brackets provided on the wall at desired height, using toggle bolts provided or other appropriate fasteners. Verify that they are in line and level to fully engage matching brackets pre-installed on back of case. When unit is set on brackets, pull down gently to ensure that it is snug and secure. Sizes Through 70" x 70" Over 70" x 70" A B* C D 3½" 3½" 3" 1½" 4¼" 4¼" 4" 2 * Bevel style case adds 11/8" to case height. Mounting bracket by Draper Figure 2 ® Copyright © 2013 Draper Inc. Form VCBArtisanM_Inst13 Printed in U.S.A. If you encounter any difficulties installing or servicing your VCB Artisan/Series M screen, call your dealer or Draper, Inc., Spiceland, Indiana, (765) 987-7999 or fax (765) 987-7142.