Transcript
VADT/VADR14100WDM SERIES
PRODUCT SPECIFICATION
DIGITALLY ENCODED VIDEO WITH BI-DIRECTIONAL STEREO AUDIO/ 2 DATA CHANNELS AND REVERSE SYNC FEATURES • 10-Bit Digitally Encoded Video Transmission
V
• Exceeds RS-250C Short-Haul Transmission • NTSC, PAL, SECAM Compatible
A
• Full Color Compatibility • 20-Bit Digitally Encoded Stereo Audio
DESCRIPTION
• 600 Ohm Impedance Line-Level Audio
The IFS VADT/VADR14100WDM series video transceivers support simultaneous broadcast quality transmission of 10-bit digitally encoded video, 20-bit digitally encoded stereo audio, bi-directional data transmission, and Genlock over one single-mode or multimode optical fiber. The modules are universally compatible with major CCTV camera manufactures and support RS-232, RS-422, and 2-wire or 4-wire RS-485 data interfaces and all major data protocols. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Each transceiver incorporates status indicating LED’s for monitoring of proper system operation. The modules are available in either stand-alone or rack mount versions.
• Distance Learning CCTV with PTZ Control & 2-way Audio Communications
D
• Reverse Sync for Genlock • LED Status Indicators For Monitoring All Critical Operating Parameters
S
• Hot-Swappable Rack Modules • Automatic Resettable Fuses on all Power Lines
APPLICATION EXAMPLES
• ITS (Intelligent Transportation Systems)
• No In-field Electrical or Optical Adjustments Required
Available at:
www.
• Distances up to 49 Miles (78 km) • Lifetime Warranty
.com
• A & E Specifications, (CSI) • AutoCAD Drawings • Operation Manuals • Technical Bulletins
ORDERING INFORMATION PART NUMBER MULTIMODE 62.5/125µm**
SINGLE-MODE 9/125µm
OPTIONS
DESCRIPTION
OPTICAL FIBERS REQUIRED PWR BUDGET
MAX. DISTANCE*
VADT14120WDM VADR14120WDM
Video Transmitter & Audio Transceiver/Data Transceiver (1310/1550 nm) Video Receiver & Audio Receiver/Data Transceiver (1550/1310 nm)
1
VADT14130WDM VADR14130WDM
Video Transmitter & Audio Transceiver/Data Transceiver (1310/ 1550 nm) Video Receiver & Audio Receiver/Data Transceiver (1550/ 1310 nm)
1
23 dB
43 miles (69 km)
VADT14130WDMHP Video Transmitter & Audio Transceiver/Data Transceiver (1310/ 1550 nm) VADR14130WDMHP Video Receiver & Audio Receiver/Data Transceiver (1550/ 1310 nm)
1
26 dB
49 miles (78 km)
13 dB @ 1550 nm 3.6 miles (6 km) 13 dB @ 1310 nm
PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order) Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) Add ‘-SC’ for SC Connector
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180 FAX (203) 426-3326 ■
[email protected] Europe, Middle East, Africa TEL +44(0) 1732 522 777 ■ Asia Pacific TEL +65 6235 2661 Australia TEL +61 2 9836 0600 ■ Latin America TEL (512) 477-8787
VADT/VADR14100WDM SERIES
TECHNICAL SPECIFICATION
DIGITALLY ENCODED VIDEO WITH BI-DIRECTIONAL STEREO AUDIO/ 2 DATA CHANNELS AND REVERSE SYNC SPECIFICATIONS
CONNECTORS Power: Audio and Data: Video: Optical: Video and Reverse Sync (Genlock):
VIDEO Video Input: Video Bandwidth: Differential Gain: Differential Phase: Tilt: Signal-to-Noise Ratio (SNR):
1 volt pk-pk (75 ohms) 5 Hz - 10 MHz <2% <0.7° <1% >67 dB
Terminal Block with Screw Clamps DB 25 Connector BNC (Gold Plated Center-Pin) ST, SC or FC (see ordering information) BNC (Gold-Plated Center Pin)
ELECTRICAL & MECHANICAL
DATA Data Interface:
Power: Surface Mount: Rack: Number of Rack Slots: Current Protection:
RS-232, RS-422 ,or 4 wire RS-485 with Tri-State NRZ, NRZI, Manchester, Bi-phase DC-100 kbps (NRZ) Simplex or Full-Duplex
Data Format: Data Rate: Operating Mode:
Circuit Board: Size (in./cm.) (LxWxH) Surface Mount: Rack Mount: Shipping Weight:
AUDIO No. of Bits: Sampling Rate: Bandwidth: Maximum Input/Output Level: Signal-to-Noise Ratio (SNR): Total Harmonic Distortion: DTE/DCE Interface: Channel Crosstalk: Input/Output:
20 52.3 KHz 20 Hz to 18 KHz @ -1 dB 0 dBm across 600 ohms 87 dB, Min. 0.01% @ 0 dB Output Level User-Selectable -100 dB at 1 KHz Balanced or Unbalanced, 600 ohm
WAVELENGTH
1310/1550 nm, Multimode 1310/1550 nm, Single-mode
NUMBER OF FIBERS
1
12 VDC @ 500 mA From Rack 2 Automatic Resettable Solid-State Current Limiters Meets IPC Standard 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm < 2 lbs./0.9 kg
ENVIRONMENTAL MTBF: Operating Temp: Storage Temp: Relative Humidity:
> 100,000 hours -40° C to +74° C -40° C to +85° C 0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
LED INDICATORS VADT Transmitter Unit:
VADR Receiver/ Data Transceiver Unit:
• Video Input Sync Presence (Bi-Color LED) • Data Transmit • Data Receive • Analog-to-Digital Converter Overload (Bi-Color LED) • Optical Carrier Detect/Line-Lock (Bi-Color LED) • Operating Power
• Video Output Sync Presence (Bi-Color LED) • Data Transmit • Data Receive • Analog-to-Digital Converter Overload (Bi-Color LED) • Optical Carrier Detect/Line-Lock (Bi-Color LED) • Operating Power
MADE IN THE USA
OPTICAL POWER BUDGET FIBER
WAVELENGTH
Multimode 62.5/125µm**
TRANSMITTER MODEL OUTPUT VADT14120WDM
1310/1550 nm Single-mode 9/125µm
VADT14130WDM VADT14130WDMHP
RECEIVER SENSITIVITY MODEL
200 µw VADR14120WDM (-7 dBm) 400 µw (-4 dBm)
OPTICAL PWR BUDGET
MAX. DISTANCE*
13 dB @ 1550 nm 13 dB @ 1300 nm
3.6 miles (6 km)
23 dB
43 miles (69 km)
26 dB
49 miles 78 km)
2 µw (-27 dBm)
VADR14130WDM
800 µw VADR14130WDMHP
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
up to 49 miles (78 km)
To External Genlock
VADT14130WDMHP
Video (Coax)
ifs
SYNC VADR14130WDMHP
International
ifs
Fiber Systems Incorporated
203.426.1180
Video (Coax)
International Fiber Systems Incorporated
203.426.1180
1 Fiber 9/125µm MM
P/T/Z Data
Audio Pre-Amp
Control Data
Control Data Audio Pre-Amp
Keyboard Amp/Speaker
Amp/Speaker
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■
[email protected] 16 Commerce Road ■ Newtown, CT 06470 Due to our continued effort to advance technology, product specifications are subject to change without notice.
05/29/03
