Transcript
[PROJECT NO.] 4-28-16
[PROJECT NAME] [PROJECT LOCATION]
This product specification is based on recognized industry standards for project documentation found within the Construction Specification Institute (CSI) Project Resource Manual – CSI Manual of Practice, MasterFormat™ [2004 Edition], SectionFormat™ [2008 Edition], and PageFormat™ [2008 Edition].
SECTION 28 23 23 VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE PART 1 GENERAL 1.01
SECTION INCLUDES A.
1.02
1.03
Digital Video Decoder for closed circuit television (CCTV) video surveillance system.
RELATED SECTIONS A.
01 80 00 Performance Requirements
B.
26 05 00 Common Work Results for Electrical
C.
26 41 00 Electrical and Cathodic Protection
D.
26 50 00 Lighting
E.
28 01 00 Operation and Maintenance of Electronic Safety and Security
F.
28 05 00 Common Work Results for Electronic Safety and Security
G.
28 06 00 Schedules for Electronic Safety and Security
H.
28 10 00 Electronic Access Control and Intrusion Detection
I.
28 20 00 Electronic Surveillance
J.
28 23 00 Video Surveillance
K.
28 30 00 Electronic Detection and Alarm
L.
28 40 00 Electronic Monitoring and Control
REFERENCES A.
Abbreviations 1.
BNC
Aventura Technologies, Inc. VDS-01
Bayonet Neill–Concelman
VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE
28 23 23-1
[PROJECT NO.] 4-28-16
B.
1.04
[PROJECT NAME] [PROJECT LOCATION]
2.
CCTV
Closed Circuit Television
3.
CE
Conformité Européenne / European Conformity
4.
DVD-RW Digital Video Disc - ReWritable
5.
DVR
Digital Video Recorder
6.
FCC
Federal Communications Commission
7.
g
grams
8.
in
Inch
9.
lbs
Pounds
10.
LAN
Local Area Network
11.
mm
Millimeter
12.
NTSC
National Television System Committee
13.
NVR
Network Video Recorder
14.
PAL
Phase Alternating Line
15.
PTZ
Pan Tilt Zoom
16.
TV
Television
17.
USB
Universal Serial Bus
18.
VAC
Volts Alternating Current
19.
VDC
Volts Direct Current
Reference Standards 1.
UL 2044 Commercial Closed Circuit Television Systems
2.
FCC Part 15 Radio Frequency Radiators
DELIVERY, STORAGE AND HANDLING
Aventura Technologies, Inc. VDS-01
VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE
28 23 23-2
[PROJECT NO.] 4-28-16
1.05
1.06
[PROJECT NAME] [PROJECT LOCATION]
A.
Deliver materials in unopened factory packaging with manufacturer’s bar coding to the project site.
B.
Inspect product upon delivery to assure that specified product has been received.
C.
Store in original packaging in a climate controlled environment. Storage temperatures in accordance with Product Specifications below.
PROJECT/SITE CONDITIONS A.
Temperature requirements in accordance with Product Specifications below.
B.
Unit is designed for indoor use only.
C.
Keep all liquids away from the Digital Video Encoder .
WARRANTY A.
1 year (12 month) manufacturer warranty.
PART 2 PRODUCTS 2.01
MANUFACTURERS A.
2.02
As manufactured by Aventura Technologies, Inc., 180 Adams Ave, Hauppauge, NY 11788, tel 631300-4000, fax 631-434-7000, email
[email protected], web aventuracctv.com
DESCRIPTION A.
H.264 Camera Decoder 1. 2. 3. 4.
2.03
Shall decode 1 channel video and 1 channel audio Shall display video at 4 CIF Shall decode H.264 Shall be compatible with encoders manufactured by Aventura
MANUFACTURED UNITS MODEL VDS-01
Aventura Technologies, Inc. VDS-01
VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE
28 23 23-3
[PROJECT NO.] 4-28-16
2.04
[PROJECT NAME] [PROJECT LOCATION]
SPECIFICATIONS: MANUFACTURED UNITS SHALL BE EQUIPPED WITH THE COMPONENTS NOTED AND SHALL HAVE THE ATTRIBUTES AS NOTED BELOW A.
General 1.
2.
Construction a. Unit Weight
4.4 lbs (1996g)
b. Dimensions
9.25" x 5.3" x 1.6" (235 x 136 x 43 mm)
c. Chassis Type
Surface Mount
Additional Features a. Supports Watermark A. Motion Detection Record
B.
Yes (multi area motion detection)
Audio / Video 1.
Video Input
H.264 (RJ-45 Ethernet Port)
2.
Alarm Input
2-channels on/off type with ground wires
3.
Alarm Out
2 ch alarm out on/off
4.
Video Output
1 Ch BNC (1.0Vp-p, 75 Ohm)
5.
Video Display Resolution
4 CIF (720 x 480), CIF (352 x 240), QCIF (176 x 120)
6.
Audio Output
1channel BNC
7.
Video Compression
H.264
8.
Bit Rate
32 kbps to 8Mbps
9.
Frame Rate
30 fps (NTSC), 25 fps (PAL)
Aventura Technologies, Inc. VDS-01
VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE
28 23 23-4
[PROJECT NO.] 4-28-16
C.
D.
[PROJECT NAME] [PROJECT LOCATION]
Communications 1.
LAN
1 - 10/100 Ethernet
2.
PTZ Control
RS-485, RS-232
Electrical Specifications 1.
Input Voltage
DC 12V
2.
Power Consumption
< 7W
E. Environmental Specifications
F.
1.
Environment
Indoor
2.
Operating Humidity
10 – 90 % RH
3.
Operating Temperature
+14 to +122 degrees F (-10 to +50 degrees C)
Regulatory Type 1.
CE
2.
FCC
3.
UL
PART 3 EXECUTION 3.01
3.02
EXAMINATION A.
Inspect products before installation
B.
Product shall be free of any cosmetic defects or damage.
PREPARATION A.
3.03
Product shall be mounted on a properly prepared surface adequate for the size and weight of product. The placement of the unit shall allow provision for cable installation and maintenance as indicated on the approved detail drawings and in compliance with the manufacturer’s recommended procedure.
INSTALLATION
Aventura Technologies, Inc. VDS-01
VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE
28 23 23-5
[PROJECT NO.] 4-28-16
3.04
3.05
3.06
[PROJECT NAME] [PROJECT LOCATION]
A.
Install product as indicated on the approved detail drawings and in accordance with the manufacturer’s recommended procedure.
B.
Ensure unit is installed in a well-ventilated, dust-free environment.
C.
Unit is designed for indoor use only.
D.
Keep all liquids away from the Digital Video Encoder .
E.
Ensure environmental conditions meet factory specifications.
F.
Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it may cause damage to the sensitive electronics within the unit.
G.
Use the Digital Video Encoder in conjunction with an UPS if possible.
H.
Power down the unit before connecting and disconnecting accessories and peripherals.
I.
A manufacturer recommended HDD should be used for this device.
TESTING A.
Verify that the Digital Video Encoder is powered in accordance with manufacturer recommendations.
B.
Verify that all cables (power and coaxial) are properly and securely connected.
C.
Review video on attached monitors and Client Workstations as applicable.
CLEANING A.
Clean Digital Video Encoder in accordance with manufacturer recommended procedures.
B.
Remove all scraps and debris.
MAINTENANCE A.
Verify Digital Video Encoder are correctly connected and all connections are secure.
B.
In the event of improper video signal at head-end equipment location, repeat Testing procedure above.
END OF SECTION
Aventura Technologies, Inc. VDS-01
VIDEO SURVEILLANCE SYSTEMS INFRASTRUCTURE
28 23 23-6
