Transcript
Model: VE2AL, VE5AL, VE2ALR
____________________________________________________________________________________ VGA & Stereo Audio CAT5/6 Extender with Chainable Output VE2AL, VE5AL is designed for VGA plus Stereo Audio signal over cost effective CAT5/6 cable instead of VGA and Audio cable. VE2AL receivers built in chainable output can cascade to the other receiver for a working range of over 300 meters. It has optimal video performance for long cable runs and perfect for multiple monitor display. This AV Extender is a cost-effective solution and eliminates costly and bulky VGA and Audio cables and the most efficient way to move multimedia content from player to display. The VGA & Audio Extender is ideal in shopping malls, public address systems, airports, train & bus stations, boardrooms, trade shows, and computer based training applications.
VE2AL 1 in 2 Out VGA with Stereo Audio CAT5/6 Extender Distribution Amplifier – Chainable Function
Extends VGA and stereo audio over one UTP CAT5/6 cable Each set includes one VE2ALT transmitter and one VE2ALR receiver Supports analog stereo audio Transmitter has 3.5mm analog stereo input. RJ45 output is converted to digital audio for better interference rejection over Cat5/6 which is then converted back to analog stereo 3.5mm output on the Receiver side Supports up to 1600x1200 @85Hz Long range transmission up to 300 meters (Max) Dual output: 1 VGA loop output for local, plus 2 x CAT5/6 RJ45 output for remote side Built in equalization, gain adjustment, chainable CAT5/6 output at remote unit Remote unit can be daisy chained to another VE2ALR receiver to extend working range over 300 meters and multiple displays Local unit VE2ALT local output: supports DDC、DDC2、DDC 2B,and provides virtual DDC, DDC backup function, to avoid wrong setting at high resolution/frequency and cause the remote monitor to not display
VE5AL 1 in 5 Out VGA with Stereo Audio CAT5/6 Extender Distribution Amplifier - Chainable function
Each set includes one VE5ALT transmitter and one VE2ALR receiver Dual output: 1 VGA loop output for local, plus 4 x CAT5/6 RJ45 output for remote side Each VGA display equipment request one VE2ALR receiver at remote side (Sold separately) Same technical specifications as VE2AL above
Option Model: VE2ALR VGA with Stereo Audio CAT5/6 Receiver– Chainable function
Works with VE2ALT, and VE5ALT transmitters as a receiver for extra remote VGA display equipment It can be daisy chained to another VE2ALR to extend working range over 300 meters and multiple displays Built in equalization, gain adjustment Supports up to 1600x1200 @85Hz
Cable: Video Link cable using high quality CAT5E/6 UTP/STP cable Please note: STP cable could enhance noise rejection, but also decrease transmission range and picture sharpness quality
RJ45 Define:
____________________________________________________________________________________ 8805 Jones Rd. Ste C104, Houston Texas 77065 * 1-888-861-7351 * www.zuummedia.com
ZM 060612
Panel View: VE2ALT
VE5ALT
VE2ALR
Installation view:
VE2ALT/VE5ALT LED: Blue (front panel): power on/off RJ45 LED (Link cable connector): Status indication: CH1 – CH4 Green on/off: VGA Signal Green flash: EDID checksum error Yellow on: use monitor DDC Yellow off: use built in DDC Yellow flash: monitor EDID checksum Error Yellow, Green, Blue all flash: Memory error
VE2ALT/VE5ALT local unit EDID set up: Setup Monitor EDID: When the yellow LED is off, press the “SETTINGS” button until the blue LED flashes, then release the “SETTTINGS” button, the yellow LED will be on Setup Built in EDID: When the yellow LED is on, press the “SETTINGS” button until the blue LED flashes, then release the “SETTTINGS” button, the yellow LED will be off Reset factory default: First unplug the power, then press the “SETTTINGS” button until power is reconnected and the blue LED flashes Auto Backup EDID: Change new monitor. It will start the monitor EDID backup
VE2ALR Remote unit adjustment:
RJ45 LED (Link cable connector):
EQ equalization (sharpness) Gain signal boost (brightness)
Green: signal lock (LED on)
Caution: The cabling must be away from any equipment with electromagnetic waves, i.e.: microwave, radio equipment, and high voltage lines
Installation tips: 1. Due to the inside of CAT5/6 cable being pairs of wires that are twisted at different rates, the different quality on cable itself AND the installation will cause different signal arrival time at each pair. If there is a big difference at arrival time, this will cause RGB skew status. This is seen on the monitor as separation, or lack of convergence in colors. Normally it happens on long CAT 5/6 cable runs.
2. We recommend referring to the diagram below to reduce skew status, and to add the special made “skew immunized adaptor” if applicable. 2 adaptors included in the package.
____________________________________________________________________________________ 8805 Jones Rd. Ste C104, Houston Texas 77065 * 1-888-861-7351 * www.zuummedia.com
ZM 060612
CAUTION: To avoid display equipment damage, be sure to make the correct cable and power connection for VE2ALT, VE5ALT, and VE2ALR before connecting.
Model:
VE2ALT
Resolution Video Bandwidth Video Input/Output Synch Input/Output Horizontal Frequency Vertical Frequency VGA Connector Analog Audio Input/Output Analog Audio Bandwidth Analog Audio Connector Connector Link Connector Max Distance Power Supply Power Consumption Dimensions - Inches Weight – lbs
VE5ALT
Up to 1600 x 1200 non-interlaced to 85 Hz Local 750MHz /Remote 350MHz-3db RGB Analog, 75 ohms, 0.7Vp-p H/V separated, 5V TTL 30-95 KHz 50-180 Hz 15-Pin Mini D-sub (high density) 10Kohms, 3Vp-p (max) 20-20KHz-3dB 3.5mm stereo phone jack Optical 2 x RJ-45 4 x RJ-45 Up to 1000 ft. (300m) 5V DC 2000mA regulated (external) 700mA (max) 4.92 (w) x 3.78 (h) x 1.81 (d) .617
Model:
VE2ALR
Resolution Video Bandwidth Video Output Sync Output Horizontal Frequency Vertical Frequency VGA Connector Analog Audio Output Analog Audio Bandwidth Analog Audio Connector Link Connector Max Distance Power Supply Power Consumption Dimension - Inches Weight – lbs
Up to 1600 x 1200 non-interlaced to 85 Hz 150MHz RGB Analog, 75 ohms, 0.7Vp-p H/V separated 5V TTL 30-95 KHz 50-180 Hz 15-Pin Mini D-sub (high density) 10K ohms, 3Vp-p (max) 20-20KHz 3.5mm stereo phone jack RJ-45 Up to 1000 ft. (300m) 5V DC 2000mA regulated (external) 700mA (max) 3.46 (w) x 3.78 (h) x 1.81 (d) .441
Do You Need Technical Support? ZuumMedia is proud to offer free technical support to ensure your product is operating correctly. If you are experiencing difficulties setting up this product, please call us for assistance 1-888-861-7351 or visit www.zuummedia.com for more information.
Here for You 24/7
____________________________________________________________________________________ 8805 Jones Rd. Ste C104, Houston Texas 77065 * 1-888-861-7351 * www.zuummedia.com
ZM 060612
