Vehicular/marine Antenna Products Book - Hascall

Transcript

Model Name Frequencies MVMP2X30 MVMP20X6 MVMP30X3 MVMP30X3AB MVMP30X17 MVDP30X17 MVDP30X17AB-383 GREEN MVDP30X17DAC MADP30X17 MADP30X17AB MVMP100X4 MVMP100X4AB MAMP100X4 MAMP100X4AB MVDP100X5 MVDP100X5AB-383 GREEN MADP100X5 MVDP110-175 MVMP132-174 MVMP146/446 MVMP153-163 MVDP200X3 MVDP225X2 MVDP225X2AB MVDP225X9 MVST240-320AB MVDP400X5 MVDP400X5AB MVMP438-470 MVDP470X2 MVDP500X5 MVDP800X3AC MVDP800X3 MVDP1400-1650-2 MVDP2.0-2.5-4 MVDP2300 MADP2.2-2.4-6 MADP2.2-2.4-7 MADP2.2-2.4-9 MADP2.2-2.4-10 MVDP2.3-2.5-7 MVDP2.3-2.5-7 & 1710-2170 MADP2.3-2.5-5AB MADP2.3-2.5-7 MADP2.3-2.5-9 MADP2.5-2.6-10 MVDP4.4-4.9-7-D MVDP4.4-5.0-7-D MVDP4.4-5.0-7-DAB MVDP4.4-5.0-9-D MADP4.8-5.2 MVDP5.0-6.0-7-D MVDP5.0-6.0-7-DAB MVDP6.0-10.0-2 2-60 MHz 22-120 MHz 30-90 MHz 30-90 MHz 30-512 MHz 30-512 MHz 30-512 MHz 30-512 MHz 30-512 MHz 30-512 MHz 100-400 MHz 100-400 MHz 100-400 MHz 100-400 MHz 100-500 MHz 100-512 MHz 100-512 MHz 110-175 MHz 132-174 MHz 146 & 446 MHz 153-163 MHz 200-500 MHz 225-450 MHz 225-450 MHz 225-2000 MHz 240-320 MHz 410-2100 MHz & L1/L2 GPS 410-2100 MHz & L1/L2 GPS 438-470 MHz 470-700 MHz 500-2500 MHz 806-960 &1800-2170 MHz 824-960 & 1710-1990 MHz 1400-1650 MHz 2000-2500 MHz 2200-2400 MHz 2200-2400 MHz 2200-2400 MHz 2200-2400 MHz 2200-2400 MHz 2300-2500 MHz 2300-2500 & 1710-2170 MHz 2300-2500 MHz 2300-2500 MHz 2300-2500 MHz 2500-2600 MHz 4400-4900 MHz 4400-5000 MHz 4400-5000 MHz 4400-5000 MHz 4800-5200 MHz 5000-6000 MHz 5000-6000 MHz 6000-10000 MHz SERIES II DIPLEXER 20-512 MHz 2-60 MHz MVMP2X30 Vehicular HF Antenna The MVMP2X30 is designed to enhance the capabilities of the common HF tactical radio application by allowing tuner-less operation across the HF band. This antenna base has integral broadband impedance matching allowing broadband waveforms to be utilized even after the addition of higher power amplifiers. Additionally, this antenna will cover 5-60 MHz with a VSWR of less than 3.5:1. For more efficient operation in the 2-5 MHz region of spectrum an accessory tuner is available to provide a lower VSWR required by some tactical transceiver products. The tuner can be located anywhere between the transceiver output and the input of the common mode choke. The tuner requires a DC voltage source of 11-16 Volts DC @ 750 mA. For most vehicular platforms efficiency depending on vehicular ground loss averages > 75%. The connector provided with the antenna is a type N Female other connectors available upon request. A 16ft (4.88 m) fiberglass whip, consisting of four screw together sections, is mounted on top of a tilting whip adapter and spring assembly. The base matching unit is also provided with a cable assembly that includes a common mode RF choke. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y07950) www.hascall-denke.com 2-60 MHz MVMP2X30 Vehicular HF Antenna “BREAK THROUGH TECHNOLOGY”  The broadband antenna can be used in two modes (1) Broadband with no tuner required or (2)   selec ve mode with tuner.  Specifica ons:   A.  Broadband Mode:  1.The antenna is pre‐tuned from 5‐22 MHz for broadband applica ons...no tuner required.  2.Input power: 200 Wa s con nuous RF  3.VSWR < 3.5:1 over the 5‐60 MHz band  4.Broadband efficiency: for most vehicular pla orms efficiency (depending on vehicular ground  loss and other broadband compensa on factors) averages greater than 60%.  B. Tuner mode:  1. Available with the MVMP2X30 antenna and fits seamlessly between the transceiver output  and the coax cable going to the antenna base matching unit. (The tuner requires a dc voltage  source of 11‐16 volts DC @ 750mA)  2. Tuner opera on (Ref. to manual) the tuner has two modes of opera on    (a) tuner off—allows broadband opera on from 5‐22 MHz...tuner is in bypass mode.    (b) tuner on—allows tuner to tune the antenna system from 2‐60 MHz single frequency. This       mode also allows a pre‐set VSWR and up to 8000 tuned single frequencies can be      stored in tuner memory.    (c) Max power: 200 Wa s    (d) Efficiency: for most vehicular pla orms efficiency (depending on vehicular ground loss)      averages > 75%.  C. Other specifica ons:  1. Standard NATO 4 bolt on 4.5 inch DBHC  2. High voltage protec on up to 20 KV and high voltage sta c buildup  protec on   3. EMP protec on included  4. Base connector: Type N Female  D. Antenna System consists of:  1. Min 16 foot fiberglass whip in four screw together sec ons  2. Spring and  lt whip adapter for NVIS applica ons   3. Base matching unit  4. Cable assembly with common mode RF choke  5. 2‐60 MHz tuner (op onal)  **All informa on on this product and the product itself is the property of and is proprietary to Hascall‐Denke. **Specifica ons are subject to change without prior no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y07950) www.hascall-denke.com 20-120 MHz MVMP20X6 Mobile Broadband Antenna The MVMP20X6 broadband antenna is designed to be used on public safety vehicles. This antenna works with all radios within the 20-120 MHz band. The antenna has a band pass covering 20-120 MHz with a single input at a power level of 100 Watts with a VSWR of less than 3.5:1 provides an efficient match to all modern public safety transceivers. Robust and tough, this antenna is housed in a fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Broadband 20-120 MHz Continuous 100 Watts Low VSWR Robust Construction Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05150) www.hascall-denke.com 20-120 MHz MVMP20X6 Mobile Broadband Antenna Specifications ELECTRICAL:       Frequency Range:        20‐120 MHz           Gain:                                ‐5 ~ +1.5 dBi ref. 1/4 wave                                                radiator on a 10’ x 10’ x 10’                                                  ground plane.         VSWR:                             < 3.0:1 Typical                                    3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                  Ver cal         Radia on Pa ern:        Azimuth: 360°                                                Eleva on:  90°          Input Connector:          Type N Female  MECHANICAL:       Overall Height:             106 in. (2.69 m)         Net Weight:                   9 lb. (4.08 kg)         Color:                              Black/Green/Tan/Grey         Moun ng:                      Six 1/4” (6.35 mm) holes equally                                                spaced on a 3 1/16” (77.79 mm)                                                diameter circle.    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05150) www.hascall-denke.com 30-90 MHz MVMP30X3 Mobile Whip Antenna The MVMP30X3 is a broadband, stainless steel whip antenna designed to be used on military tactical vehicles. This antenna is designed to work with frequency hopping radio systems in the VHF 30-90 MHz band. The antenna is also compatible with all fixed frequency and selective frequency transceivers. This antenna requires no additional power cables, tuning, or adjustments of any kind for its operation. Short and Thin Profile Matching Network in Base 75 Watt Power Capability High Voltage Isolated and EMP Protection Standard 4.5” BHC Mount (NATO Std.) Stainless Steel Whip Designed to Meet MIL-STD-810 Environmental Specifications For Tactical Military Use Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01825) www.hascall-denke.com 30-90 MHz MVMP30X3 Mobile Whip Antenna Specifications 30 MHz VERTICAL GAIN PATTERN  ELECTRICAL:       Frequency Range:        30‐90 MHz           Gain:                               ‐5.6 dBi @ 30 MHz                                                ‐1.7 dBi @ 90 MHz         VSWR:                             < 3.0:1 Typical                                    3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             75 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           BNC (Others Available)  60 MHz VERTICAL GAIN PATTERN  MECHANICAL:  90 MHz VERTICAL GAIN PATTERN       Overall Height:              75 in. (1.91 m)         Net Weight:                    5 lb. (2.27 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01825) www.hascall-denke.com 30-90 MHz MVMP30X3AB Mobile Broadband Antenna The MVMP30X3AB broadband antenna is designed for tactical battlefield conditions using frequency hopping radios. This antenna requires no tuning within the 30-90 MHz band. The antenna is and ideal choice for multiband radios and can replace multiple antennas with a single antenna. The antenna is designed for mounting on armored or other metallic body vehicles. Rugged Fiberglass Construction Ideal for Armored Vehicles Spring Base 30-90 MHz Frequency Hopping Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y04600) www.hascall-denke.com 30-90 MHz MVMP30X3AB Mobile Broadband Antenna Specifications 30 MHz VERTICAL GAIN PATTERN  ELECTRICAL:       Frequency Range:        30‐90 MHz           Gain:                                ‐5 ~ +1.5 dBi ref. 1/4 wave                                                radiator on a 10’ x 10’ x 10’                                                  ground plane.         VSWR:                             < 3.0:1 Typical                                    3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             200 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           BNC or Type N Female  60 MHz VERTICAL GAIN PATTERN  90 MHz VERTICAL GAIN PATTERN  MECHANICAL:       Overall Height:              106 in. (2.69 m)         Net Weight:                    9 lb. (4.08 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y04600) www.hascall-denke.com 30-512 MHz MVMP30X17 Mobile Broadband Antenna The MVMP30X17 broadband monopole antenna is designed for tactical battlefield conditions using frequency hopping radios. This antenna requires no tuning within the 30-512 MHz band. The antenna is an ideal choice for multiband radios and can replace multiple antennas with a single antenna. This antenna is designed for mounting on armored or other metallic body vehicles. Rugged Fiberglass Construction Ideal for Armored Vehicles Spring Base 30-512 MHz Frequency Hopping Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01875) www.hascall-denke.com 30-512 MHz MVMP30X17 Mobile Broadband Antenna Specifications ELECTRICAL:       Frequency Range:        30‐512 MHz           Gain:                                ‐5 ~ +1.5 dBi ref. 1/4 wave                                                radiator on a 10’ x 10’ x 10’                                                  ground plane.         VSWR:                             < 3.0:1 Typical                                    3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           BNC or Type N Female  MECHANICAL:  GAIN VS. QUARTER WAVE       Overall Height:              106 in. (2.69 m)         Net Weight:                    9 lb. (4.08 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01875) www.hascall-denke.com 30-512 MHz MVDP30X17 Vehicular Broadband Antenna The MVDP30X17 is a broadband dipole antenna designed to be used with military, private, or commercial applications where reliability is needed most. This antenna works with all radios within the 30-512 MHz band. The antenna has a band pass covering 30-512 MHz with a single input (dual input available) at a power level of 50 Watts. A VSWR of less than 3.0:1 throughout the 155-512 MHz and a maximum of 3.5:1 between 30-90 MHz provides an efficient match to all modern military transceivers. Being “ground independent”, this antenna can be used on all types of structures (metal or non-metal) with no degradation in performance. The upper whip may be removed for lower physical signature (lower height) with minimal degradation in electrical performance in the lower frequencies. 30-512 MHz Continuous 50 Watts Robust Construction Low VSWR. Ground Independent Mounting bracket shown not included. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01900) www.hascall-denke.com 30-512 MHz MVDP30X17 Vehicular Broadband Antenna Specifications VERTICAL GAIN PATTERN 30 MHz  ELECTRICAL:       Frequency Range:        30‐512 MHz           Gain:                                ‐6 dBi @   30 MHz                                                  2 dBi @   88 MHz                                                  5 dBi @ 116 MHz                                                  3 dBi @ 512 MHz         VSWR:                             3.5:1 Max (Except at                                                 crossover band.)         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  VERTICAL GAIN PATTERN 450 MHz  GAIN AT 0° ELEVATION VS. 1/4 WAVE  MECHANICAL:       Overall Height:              89 in. (2.26 m)         Net Weight:                    8 lb. (3.63 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01900) www.hascall-denke.com 30-512 MHz MVDP30X17AB-383 GREEN Vehicular Broadband Antenna The MVDP30X17AB-383 GREEN broadband dipole antenna is designed to be used with military, private, or commercial applications where reliability is needed most. This antenna works with all radios within the 30-512 MHz band. The antenna has a band pass covering 30-512 MHz with a single input (dual input available) at a power level of 50 Watts. A VSWR of less than 3.0:1 throughout the 155-512 MHz and a maximum of 3.5:1 between 30-90 MHz provides an efficient match to all modern military transceivers. Being “ground independent”, this antenna can be used on all types of structures (metal or non-metal) with no degradation in performance. The upper whip may be removed for lower physical signature (lower height) with minimal degradation in electrical performance in the lower frequencies. 30-512 MHz Continuous 50 Watts Robust Construction Low VSWR. Ground Independent Mounting bracket shown not included. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y09450) www.hascall-denke.com 30-512 MHz MVDP30X17AB-383 GREEN Vehicular Broadband Antenna Specifications VERTICAL GAIN PATTERN 30 MHz  ELECTRICAL:       Frequency Range:        30‐512 MHz           Gain:                                ‐6 dBi @   30 MHz                                                  2 dBi @   88 MHz                                                  5 dBi @ 116 MHz                                                  3 dBi @ 512 MHz         VSWR:                             3.5:1 Max (Except at                                                 crossover band.)         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  VERTICAL GAIN PATTERN 450 MHz  GAIN AT 0° ELEVATION VS. 1/4 WAVE  MECHANICAL:       Overall Height:              89 in. (2.26 m)         Net Weight:                    8 lb. (3.63 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y09450) www.hascall-denke.com 30-90 & 130-512 MHz MVDP30X17DAC Dual Input Vehicular Broadband Antenna The MVDP30X17DAC is a broadband dipole antenna designed to be used with military, private, or commercial applications where reliability is needed most. This antenna works with all radios within the 30-90 & 130 -512 MHz bands. Being “ground independent”, this antenna can be used on all types of structures (metal or non-metal) with no degradation in performance. The upper whip may be removed for lower physical signature (lower height) with minimal degradation in electrical performance in the lower frequencies. 50 Watts Robust Construction Low VSWR. Ground Independent Mounting bracket shown not included. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19900) www.hascall-denke.com 30-90 & 130-512 MHz MVDP30X17DAC Dual Input Vehicular Broadband Antenna Specifications VERTICAL GAIN PATTERN 30 MHz  ELECTRICAL:       Frequency Range:        30‐90 & 130‐512 MHz           Gain:                                ‐6 dBi @   30 MHz                                                  2 dBi @   88 MHz                                                  3 dBi @ 512 MHz         VSWR:                             3.5:1 Max (Except at                                                 crossover band.)         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           (2) Type N Female  VERTICAL GAIN PATTERN 450 MHz  GAIN AT 0° ELEVATION VS. 1/4 WAVE  MECHANICAL:       Overall Height:              89 in. (2.26 m)         Net Weight:                    8 lb. (3.63 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19900) www.hascall-denke.com 30-512 MHz MADP30X17 Broadband Vehicular Antenna The MADP30X17 is a broadband dipole antenna designed to be used with military, private, or commercial applications where reliability is needed most. This antenna works with all radios within the 30-512 MHz band. The antenna has a band pass covering 30-512 MHz with a single input (dual input available) at a power level of 50 Watts. A VSWR of less than 3.0:1 throughout the 155-512 MHz and a maximum of 3.5:1 between 30-90 MHz provides an efficient match to all modern military transceivers. Being “ground independent”, this antenna can be used on all types of structures (metal or non-metal) with no degradation in performance. The upper whip may be removed for lower physical signature (lower height) with minimal degradation in electrical performance in the lower frequencies. 30-512 MHz Continuous 50 Watts Robust Construction Low VSWR. Ground Independent Mounting bracket shown not included. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y06800) www.hascall-denke.com 30-512 MHz MADP30X17 Broadband Vehicular Antenna Specifications VERTICAL GAIN PATTERN 30 MHz  ELECTRICAL:       Frequency Range:        30‐512 MHz           Gain:                                ‐6 dBi @   30 MHz                                                  2 dBi @   88 MHz                                                  5 dBi @ 116 MHz                                                  3 dBi @ 512 MHz         VSWR:                             < 3.5:1 Max                                                 (Except at Crossover Band)         Input Impedance:         50 Ω Nominal         Power:                            50 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  VERTICAL GAIN PATTERN 450 MHz  GAIN AT 0° ELEVATION VS. 1/4 WAVE  MECHANICAL:      Overall Height:               89 in. (2.26 m)         Net Weight:                    8 lb. (3.63 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC    VSWR    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y06800) www.hascall-denke.com 30-512 MHz MADP30X17AB Marine Broadband Antenna The MADP30X17AB broadband antenna designed to be used with military, private, or commercial applications where reliability is needed most. This antenna works with all radios within the 30-512 MHz band. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. Optimum Performance with Minimum Radiator Length Robust Construction Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y06850) www.hascall-denke.com 30-512 MHz MADP30X17AB Marine Broadband Antenna Specifications ELECTRICAL:      Frequency Range:        30‐512 MHz           Gain:                                ‐15 dBi @   30 MHz                                                   ‐2 dBi @   88 MHz                                                    5 dBi @ 116 MHz                                                    3 dBi @ 512 MHz         VSWR:                             3.5:1 Max @ 30‐90 MHz                                    2.5:1 Max @ 155‐512 MHz         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:       Overall Height:              40 in. (1.02 m)         Net Weight:                    8 lb. (3.63 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y06850) www.hascall-denke.com 100-400 MHz MVMP100X4 NSN: 5985-01-452-5851 Mobile Vehicular Antenna The MVMP100X4 was developed to meet the rigors of military tactical environments and provide reliable communications under the most adverse conditions. The primary parameters for the design of the MVMP100X4 were as follows:      Optimum Gain for 100-400 MHz Low Profile for Minimum Physical Signature Low VSWR (< 2.5:1) Survivability in Hostile Environments Ground Independence (i.e. to perform on fiberglass as well as metal surfaces) The radiator is encased in a durable fiberglass radome and attached to the matching base unit by a heavy duty stainless steel coil spring. Both the radiator and base matching unit are pressure filled with a structural thermoset foam for maximum strength. The spring is coated with black nickel and the aluminum base flange is black anodized. The entire antenna is over coated with a matte black two-part urethane. Optimum performance is achieved when the MDB001 is used with UM002 universal vehicular antenna mount. The antenna is easy to install using the 1/4” stainless steel cap screws (6 ea.) provided with the UM002 mount. The bolt holes are evenly spaced on a 3-1/16” circle. The Type-N Female connector is recessed in the base mounting flange for mechanical and protection from the environment. UM002 mounting bracket not included. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00115) www.hascall-denke.com 100-400 MHz MVMP100X4 NSN: 5985-01-452-5851 Mobile Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:        100‐400 MHz           Gain:                                Unity         VSWR:                             < 2.5:1 Typical                                    3.0:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s CW & PEP         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:       Overall Height:              20 in. (0.51 m)         Net Weight:                    4 lb. (1.81 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00115) www.hascall-denke.com 100-400 MHz MVMP100X4AB NSN: 5985-01-413-7074 Mobile Vehicle Antenna The MVMP100X4AB was developed to meet the rigors of military tactical environments and provide reliable communications under the most adverse conditions. The MVMP100X4AB also provides increased radiation efficiency in comparison to the MVMP100X4, and is used where minimal physical size is not of paramount importance. The primary parameters for the design are as follows:  Optimum Gain for 100-400 MHz  Low VSWR ( < 2.5:1)  Survivability in Hostile Environments  Ground Independence (i.e. to perform on fiberglass as well as metal surfaces) A radiator element is encased in a durable fiberglass radome and attached to the base matching unit by a heavy duty stainless steel coil spring. Both the radiator and base matching unit are pressure filled with a structural foam for maximum strength. The spring is coated with black oxide and the aluminum base flange is black anodized. The radome, base matching unit and mounting flange are over coated with a matte black two-part urethane. Optimum performance is realized when the MDB002 is used with UM002 universal vehicular antenna mount. The antenna is easy to install using the (6 ea.) 1/4” S-S cap screws provided with the UM002 mount. The 6 mounting holes are evenly spaced on a 3 1/6” circle. The Type N Female connector is recessed in the base mounting flange for mechanical and environmental protection. UM002 mounting bracket not included. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00116) www.hascall-denke.com 100-400 MHz MVMP100X4AB NSN: 5985-01-413-7074 Mobile Vehicle Antenna Specifications ELECTRICAL:       Frequency Range:        100‐400 MHz           Gain:                                Unity         VSWR:                             < 2.5:1 Typical                                    3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s CW & PEP         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               37 in. (0.94 m)         Net Weight:                    5.25 lb. (2.38 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00116) www.hascall-denke.com 100-400 MHz MAMP100X4 Marine Broadband Antenna The MAMP100X4 is a ground independent monopole antenna designed for marine operations. The UM002 mounting bracket facilitates mounting on all sloping surfaces from 0° (horizontal) through 90° (vertical). The antenna and mount are designed to meet severe marine environments. Optimum compromises have been made in the antenna “matching” to permit acceptable performance under a wide variety of “near field conditions”. The radiator is encased in a high-impact fiberglass tube which is foam-filled for stability and strength. The base is aluminum, anodized to MIL-A-0625. For corrosive and water protection the antenna is overall coated with Prolane-T flat black two part polyurethane. UM002 Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00117) www.hascall-denke.com 100-400 MHz MAMP100X4 Marine Broadband Antenna Specifications ELECTRICAL:       Frequency Range:        100‐400 MHz           Gain:                                Unity         VSWR:                             < 2.5:1 Typical                                    3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s CW & PEP         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               37 in. (0.94 m)         Net Weight:                    3 lb. (1.36 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00117) www.hascall-denke.com 100-400 MHz MAMP100X4AB Marine Broadband Antenna The MAMP100X4AB is a ground independent monopole antenna designed for marine operations. The UM002 mounting bracket facilitates mounting on all sloping surfaces from 0° (horizontal) through 90° (vertical). The antenna and mount are designed to meet severe marine environments. Optimum compromises have been made in the antenna “matching” to permit acceptable performance under a wide variety of “near field conditions”. The radiator is encased in a high-impact fiberglass tube which is foam-filled for stability and strength. The base is aluminum, anodized to MIL-A-0625. For corrosive and water protection the antenna is overall coated with Prolane-T flat black two part polyurethane. UM002 Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00118) www.hascall-denke.com 100-400 MHz MAMP100X4AB Marine Broadband Antenna Specifications ELECTRICAL:       Frequency Range:        100‐400 MHz           Gain:                                Unity         VSWR:                             < 2.5:1 Typical                                    3.0:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:       Overall Height:              20 in. (0.51 m)         Net Weight:                    4 lb. (1.81 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y00118) www.hascall-denke.com 100-512 MHz MVDP100X5 Mobile Broadband Antenna The MVDP100X5 broadband antenna is designed to be used with military, private or commercial applications where reliability is needed most. This antenna works with all radios within the 100-512 MHz band. The antenna has a band pass covering 100-512 MHz with a single input, at a power level of 75 Watts. A VSWR of less than 2.5:1 throughout most of the band provides an efficient match to all modern military transceivers. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Broadband 100-512 MHz Continuous 75 Watts Low VSWR Ground Independent Robust Construction Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y06700) www.hascall-denke.com 100-512 MHz MVDP100X5 Mobile Broadband Antenna Specifications 100 MHz GAIN PATTERN  ELECTRICAL:       Frequency Range:        100‐512 MHz           Gain:                                5 dBi @ 116 MHz                                                 3 dBi @ 512 MHz         VSWR:                             2.5:1 Typical         Input Impedance:         50 Ω Nominal         Power:                             75 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               40 in. (1.02 m)   300 MHz GAIN PATTERN  500 MHz GAIN PATTERN         Net Weight:                    7 lb. (3.18 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y06700) www.hascall-denke.com 100-512 MHz MVDP100X5AB-383 GREEN Mobile Broadband Antenna The MVDP100X5-383 GREEN broadband antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all radios within the 100-512 MHz band. The antenna has a band pass covering 100-512 MHz with a single input, at a power level of 75 Watts. A VSWR of less than 2.5:1 throughout most of the band provides and efficient match to all modern military transceivers. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Broadband 100-512 MHz Continuous 75 Watts Low VSWR Ground Independent Robust Construction Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y09420) www.hascall-denke.com 100-512 MHz MVDP100X5AB-383 GREEN Mobile Broadband Antenna Specifications 100 MHz GAIN PATTERN  ELECTRICAL:       Frequency Range:        100‐512 MHz           Gain:                                5 dBi @ 116 MHz                                                 3 dBi @ 512 MHz         VSWR:                             2.5:1 Typical         Input Impedance:         50 Ω Nominal         Power:                             75 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               40 in. (1.02 m)   300 MHz GAIN PATTERN  500 MHz GAIN PATTERN         Net Weight:                    7 lb. (3.18 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y09420) www.hascall-denke.com 100-512 MHz MADP100X5 Marine Broadband Antenna The MADP100X5 broadband antenna is designed to be used with military, private or commercial applications where reliability is needed most. This antenna works with all radios within the 100-512 MHz band. The antenna has a band pass covering 100-512 MHz with a single input, at a power level of 75 Watts. A VSWR of less than 2.5:1 throughout most of the band provides an efficient match to all modern military transceivers. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Broadband 100-512 MHz Continuous 75 Watts Low VSWR Ground Independent Robust Construction Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y04550) www.hascall-denke.com 100-512 MHz MADP100X5 Marine Broadband Antenna Specifications 100 MHz GAIN PATTERN  ELECTRICAL:       Frequency Range:        100‐512 MHz           Gain:                                5 dBi @ 116 MHz                                                 3 dBi @ 512 MHz         VSWR:                             2.5:1 Typical         Input Impedance:         50 Ω Nominal         Power:                             75 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               40 in. (1.02 m)   300 MHz GAIN PATTERN  500 MHz GAIN PATTERN         Net Weight:                    7 lb. (3.18 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y04550) www.hascall-denke.com 110-175 MHz MVDP110-175 Tactical Mobile Antenna The MVDP110-175 antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all VHF frequency hopping radios within the 110-175 MHz band. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y03600) www.hascall-denke.com 110-175 MHz MVDP110-175 Tactical Mobile Antenna Specifications ELECTRICAL:       Frequency Range:        110‐175 MHz           Gain:                                0.0 ~ 2.0 dBi         VSWR:                             3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             75 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90° EMP Protec on:            Included          Input Connector:           Type BNC Female  MECHANICAL:      Overall Height:               54 in. (1.37 m)         Net Weight:                    6.5 lb. (2.95 kg)         Color:                               Black/Green/Tan/Grey         Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)        Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y03600) www.hascall-denke.com 132-174 MHz MVMP132-174 Vehicular Broadband Antenna The MVDP132-174 antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all radios within the 132-174 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. 20 Watts Low VSWR Ground Independent Robust Construction UM002 Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y02700) www.hascall-denke.com 132-174 MHz MVMP132-174 Vehicular Broadband Antenna Specifications ELECTRICAL:       Frequency Range:        132‐174 MHz           Gain:                                2.0 dBi Nominal         VSWR:                             < 2.5:1 Typical                                    2.75:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             20 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               53 in. (1.35 m)         Net Weight:                    4 lb. (1.81 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y02700) www.hascall-denke.com 146 & 446 MHz MVMP146/449 Mobile Broadband Antenna The MVMP146/449 antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all radios at the 146 & 449 MHz band. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Magnetic mount, shown left, sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01800) www.hascall-denke.com 146 & 446 MHz MVMP146/449 Mobile Broadband Antenna Specifications ELECTRICAL:       Frequency Range:        4 Bands within 100‐500 MHz         Gain:                                4.5 dBi +/‐ .5         VSWR:                             1.5:1 Nominal         Input Impedance:         50 Ω Nominal         Power:                             70 Wa s         Polariza on:                   Omnidirec onal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               55 in. (1.40 m)         Net Weight:                    5 lb. (2.27 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y01800) www.hascall-denke.com 153-163 MHz MVMP153-163 Mobile Vehicular Antenna The MVMP153-163 monopole antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all radios within the 153-163 MHz band. This antenna has an instantaneous band width of 10 MHz over the operating band of 153-163 MHz with a VSWR of 2.0:1 or less at any frequency within the operational band at power inputs of up to 20 Watts. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. MM003 Magnetic Mount sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05550) www.hascall-denke.com 153-163 MHz MVMP153-163 Mobile Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:        153‐163 MHz           VSWR:                             2.0:1 Nominal         Input Impedance:         50 Ω Nominal         Power:                             20 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           PSC‐5  MECHANICAL:      Overall Height:               20 in. (0.51 m)         Color:                               Black/Green/Tan/Grey         Moun ng:                       MM003 Magne c Mount                                                 (Sold Separately)    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05550) www.hascall-denke.com 200-500 MHz MVDP200X3 Mobile Dipole Antenna The MVDP200X3 antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all radios within the 200-500 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05050) www.hascall-denke.com 200-500 MHz MVDP200X3 Mobile Dipole Antenna Specifications ELECTRICAL:       Frequency Range:        200‐500 MHz           Gain:                                0.0 ~ 2.0 dBi         VSWR:                             3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°         EMP Protec on:            Included          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               40 in. (1.02 m)         Net Weight:                    4.5 lb. (2.04 kg)         Color:                               Black/Green/Tan/Grey         Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)        Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05050) www.hascall-denke.com 225-450 MHz MVDP225X2 Mobile Dipole Antenna The MVDP225X2 antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all radios within the 225-450 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y03650) www.hascall-denke.com 225-450 MHz MVDP225X2 Mobile Dipole Antenna Specifications ELECTRICAL:       Frequency Range:        225‐450 MHz           Gain:                                0.0 ~ 2.0 dBi         VSWR:                             3.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             60 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°         EMP Protec on:            Included          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               40 in. (1.02 m)         Net Weight:                    4.5 lb. (2.04 kg)         Opera onal Temps:      ‐40° to +158°F   (‐40° to +70°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y03650) www.hascall-denke.com 225-450 MHz MVDP225X2AB Mobile Dipole Antenna The MVDP225X2AB antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all frequency hopping radios within the 225-450 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10850) www.hascall-denke.com 225-450 MHz MVDP225X2AB Mobile Dipole Antenna Specifications ELECTRICAL:       Frequency Range:        225‐450 MHz           Gain:                                ‐1.5 dBi (225‐450 MHz)                                                +0.5 dBi (325‐450 MHz)         VSWR:                             2.5:1 Nominal         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90° EMP Protec on:            Included          Input Connector:           BNC  MECHANICAL:      Overall Height:               40 in. (1.02 m)         Net Weight:                    4.5 lb. (2.04 kg)         Opera onal Temps:      ‐40° to +158°F   (‐40° to +70°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10850) www.hascall-denke.com 225-2000 MHz MVDP225X9 Mobile Dipole Antenna The MVDP225X9 antenna is designed to be mounted on military and other off-road vehicles and works with all UHF frequency hopping radios within the 225-2000 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Vehicular Mount* Mast Mount* *Mounting brackets sold separately. Other mount styles available. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10000) www.hascall-denke.com 225-2000 MHz MVDP225X9 Mobile Dipole Antenna Specifications VERTICAL GAIN PATTERN 225 MHz  ELECTRICAL:       Frequency Range:        225‐2000 MHz          Gain:                                0.0 dBi Nominal         VSWR:                             2.5:1 Nominal         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          Input Connector:           Type N Female  VERTICAL GAIN PATTERN 1000 MHz  MECHANICAL:      Overall Height:               44.75 in. (1.14 m)         Radome Diameter:       2.25 in. (57.15 mm)         Net Weight:                    < 10 lb. (< 4.5 kg)         Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)         Color:                                Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VERTICAL GAIN PATTERN 2000 MHz  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10000) www.hascall-denke.com 240-320 MHz MVST240-320AB Covert UHF SATCOM Antenna The MVST240-320AB is a lightweight, low profile, UHF SATCOM antenna system. The antenna is Right Hand Circular Polarized (RHCP) and is intended for satellite communication. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y14200) www.hascall-denke.com 240-320 MHz MVST240-320AB Covert UHF SATCOM Antenna Specifications Eleva on Pa ern Rx Band 240‐264 MHz ELECTRICAL:       Frequency Range: 240‐320 MHz    Instantaneous Band Width: 80 MHz         Peak Gain: +3.0 dBic Average         Rx Peak Gain: +4.5 dBic Average         Tx Peak Gain: +2.0 dBic Average         VSWR: 3:1 Maximum         Input Impedance: 50 Ω Nominal         Power: 100 Wa s CW         Polariza on: Right Hand Circular Polarized                                                (RHCP)         Azimuth Coverage: Omnidirec onal          Input Connector: TNC Female  Eleva on Pa ern Tx Band 292‐318 MHz VSWR MECHANICAL: 20  in. (0.51 m) Long       Overall Size:                                                15  in. (0.38 m) Wide                                                 4.5 in. (0.11 m) Tall         Net Weight: 13 lb. (5.9 kg)    Opera onal Temps:  ‐40° to +185°F                                                 (‐40° to +85°C)         Color: Black  **All informa on on this product and the product itself is the property of and is proprietary to Hascall‐Denke. **Specifica ons are subject to change without prior no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y14200) www.hascall-denke.com 410-2100 MHz & L1/L2 GPS MVDP400X5 Broadband Multi-Input Antenna The MVDP400X5 antenna is designed to be mounted on military and other off-road vehicles and works with all radios within the 410-2100 MHz band and L1/L2 GPS. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. This antenna will meet or exceed MIL-STD-810 environmental standards. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10500) www.hascall-denke.com 410-2100 MHz & L1/L2 GPS MVDP400X5 Broadband Multi-Input Antenna Specifications ELECTRICAL:       Frequency Range: 410‐2100 MHz                                                  1575.42 MHz (L1 GPS)                                                1227.60 MHz (L2 GPS)         Gain: 0.0 ~ 2.0 dBi +/‐ .5         VSWR: 2:1 Maximum  LNA Gain: 29 dB Minimum         Element Gain: 3 dBiC Min. RHCP Polariza on         LNA DC Power:              2.5 ‐ 16 VDC (35 mA Max)         Input Impedance: 50 Ω Nominal         Power: 60W Con nuous                                                100 Wa s Intermi ent         Polariza on: Ver cal         Radia on Pa ern: Azimuth: 360°                                                 Eleva on:  90°        Input Connector: (2) Type N Female                                                 (1) Type TNC (GPS)  MECHANICAL:     Overall Height: 46 in. (1.17 m)         Net Weight: < 10 lb. (< 4.5 kg)    Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)        Color: Black/Green/Tan/Grey         Moun ng: NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the property of and is proprietary to Hascall‐Denke. **Specifica ons are subject to change without prior no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10500) www.hascall-denke.com 410-2100 MHz & L1/L2 GPS MVDP400X5AB Broadband Dual-Input Antenna The MVDP400X5AB antenna is designed to be mounted on military and other off-road vehicles and works with all radios within the 410-2100 MHz band and L1/L2 GPS. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. This antenna will meet or exceed MIL-STD-810 environmental standards. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y11750) www.hascall-denke.com 410-2100 MHz & L1/L2 GPS MVDP400X5AB Broadband Dual-Input Antenna Specifications ELECTRICAL:       Frequency Range: 410‐2100 MHz                                                  1575.42 MHz (L1 GPS)                                                1227.60 MHz (L2 GPS)         Gain: 0.0 ~ 2.0 dBi +/‐ .5         VSWR: 2:1 Maximum  LNA Gain: 29 dB Minimum         Element Gain: 3 dBiC Min. RHCP Polariza on         LNA DC Power:              2.5 ‐ 16 VDC (35 mA Max)         Input Impedance: 50 Ω Nominal         Power: 60W Con nuous                                                100 Wa s Intermi ent         Polariza on: Ver cal         Radia on Pa ern: Azimuth: 360°                                                 Eleva on:  90°        Input Connector: (1) Type N Female                                                 (1) Type TNC Female (GPS)  MECHANICAL:     Overall Height: 34 in. (0.86 m)         Net Weight: < 10 lb. (< 4.5 kg)    Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)        Color: Black/Green/Tan/Grey         Moun ng: NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the property of and is proprietary to Hascall‐Denke. **Specifica ons are subject to change without prior no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y11750) www.hascall-denke.com 438-470 MHz MVMP438-470 Vehicular Broadband Antenna The MVDP438-470 antenna is designed to be used in military, commercial, and other applications where reliability is needed most. This antenna works with all radios within the 438-470 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. UM002 Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y02725) www.hascall-denke.com 438-470 MHz MVMP438-470 Vehicular Broadband Antenna Specifications ELECTRICAL:       Frequency Range:        438‐470 MHz           VSWR:                             2.5:1 Maximum         Input Impedance:         50 Ω Nominal         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°  MECHANICAL:       Color:                               Black/Green/Tan/Grey        Moun ng:                       Six 1/4” (6.35 mm) holes equally                                                 spaced on a 3 1/16” (77.79 mm)                                                 diameter circle.  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y02725) www.hascall-denke.com 470-700 MHz MVDP470X2 Mobile Dipole Antenna The MVDP470X2 antenna is designed to be designed to be mounted on military and other off-road vehicles and work with all frequency hopping radios within the 470-700 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y07150) www.hascall-denke.com 470-700 MHz MVDP470X2 Mobile Dipole Antenna Specifications ELECTRICAL:       Frequency Range:        470‐700 MHz           Gain:                                0.0 ‐ 2.0 dBi         VSWR:                             3.0:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             30 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90° EMP Protection: Included          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               32 in. (0.81 m)         Net Weight:                    4 lb. (1.81 kg)         Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)        Color:                                Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y07150) www.hascall-denke.com 500-2500 MHz MVDP500X5 Mobile Dipole Antenna The MVDP500X5 antenna is designed to be mounted on military and other off-road vehicles an work with all frequency hopping radios within the 500-2500 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. The Radiator elements are made of brass tubing for maximum conductivity. Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y03700) www.hascall-denke.com 500-2500 MHz MVDP500X5 Mobile Dipole Antenna Specifications ELECTRICAL:       Frequency Range:        500‐2500 MHz          Gain:                                0.0 ~ 3.0 dBi         VSWR:                             3.0:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             30 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          EMP Protec on:            Included         Input Connector:           Type N Female  MECHANICAL:      Overall Height:               32 in. (0.81 m)         Net Weight:                    4 lb. (1.81 kg)         Opera onal Temps:      ‐40° to +158°F (-40° to +70°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y03700) www.hascall-denke.com 806-960 & 1800-2170 MHz MVDP800X3AC Dual Band Dual Input Antenna The MVDP800X3AC dual band antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 806-960 and 1800-2170 MHz bands. The antenna is designed to provide maximum Data, Video & Voice performance in a wide range of applications whether used in a MIMO, Diversity, or Separate Radio application. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. The elements are engineered for additional isolation performance between the inputs. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. Dual Input Design Vehicle Space Reduction MIMO, Diversity, or Separate Radio Ready Ideal Pattern/Beam Width and Sidelobe Control Designed to Reduce BER (Bit Error Rate) NATO Base Spring Mount Plug & Play Design Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16500) www.hascall-denke.com 806-960 & 1800-2170 MHz MVDP800X3AC Dual Band Dual Input Antenna Specifications ELECTRICAL:       Frequency Range:        806‐960 & 1800‐2170 MHz         Gain:                                4.0 ~ 5.0 dBi +/‐ .5         VSWR:                             2.0:1 Typical (In Bands)                                    2.5:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             60 Wa s Max         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  42°          Input Connector:           (2) Type N Female    MECHANICAL:      Overall Height:               47 in. (1.19 m)         Radome Diameter:        1.25 in. (31.8 mm)         Maximum Wind Load: 150 mph (241 km/h)         Net Weight:                    <10 lb. (< 4.5 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                                Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16500) www.hascall-denke.com 824-960 & 1710-1990 MHz MVDP800X3 Dual Band Dual Input Antenna The MVDP800X3AC dual band antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 806-960 and 1800-2170 MHz bands including L1/L2 GPS. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. The elements are engineered for additional isolation performance between the inputs. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. This antenna is built to meet or exceed MIL-STD-810F environmental standards. Dual Input Design Vehicle Space Reduction Ground Independent MIMO, Diversity, or Separate Radio Ready Ideal Pattern/Beam Width and Sidelobe Control Designed to Reduce BER (Bit Error Rate) NATO Base Spring Mount Plug & Play Design Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y14350) www.hascall-denke.com 824-960 & 1710-1990 MHz MVDP800X3 Dual Band Dual Input Antenna Specifications ELECTRICAL:       Frequency Range: 806‐960 & 1800‐2170 MHz                                                1575.42 MHz (L1 GPS)                                                1227.60 MHz (L2 GPS)           Gain: 4.0 ~ 5.0 dBi +/‐ .5         VSWR: 2.1:1 Maximum (In Bands)         Input Impedance: 50 Ω Nominal         Power: 60 Wa s Max         Polariza on: Ver cal         Radia on Pa ern: Azimuth: 360°                                                  Eleva on:  42°          Input Connector: (2) Type N Female                                                 (1) Type TNC (GPS) MECHANICAL:     Overall Height: 47 in. (1.19 m)         Radome Diameter:        1.25 in. (31.8 mm)         Maximum Wind Load: 150 mph (241 km/h)         Net Weight: <10 lb. (< 4.5 kg)         Opera onal Temps:  ‐40° to +185°F                                                 (‐40° to +85°C)         Color: Black/Green/Tan/Grey         Moun ng: NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the property of and is proprietary to Hascall‐Denke. **Specifica ons are subject to change without prior no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y14350) www.hascall-denke.com 1400-1650 MHz MVDP1400-1650-2 Omnidirectional Vehicular Antenna The MVDP1400-1650-2 antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 1400-1650 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. User Friendly and Easy to Install 360° Azimuth Coverage Ideal Pattern/Beam Width and Sidelobe Control Radiator Located at Top of Antenna for Maximum Emission Performance Plug & Play Design Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y17700) www.hascall-denke.com 1400-1650 MHz MVDP1400-1650-2 Omnidirectional Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:        555‐555 MHz           Gain:                                2.0 ~ 3.0 dBi +/‐ .5         VSWR:                             < 2.0:1 Typical         Input Impedance:         50 Ω Nominal         Power:                             40 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  67°          EMP Protec on:            Included         Input Connector:           Type N Female  MECHANICAL:      Overall Height:                30 in. (0.76 m)         Net Weight:                     4 lb. (1.81 kg)         Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)         Color:                                Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y17700) www.hascall-denke.com 2000-2500 MHz MVDP2.0-2.5-4 Omnidirectional Vehicular Antenna The MVDP2.0-2.5-4 antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 2000-2500 MHz band. The antenna is designed to provide maximum Data, Video & Voice performance in a wide range of applications. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion has a spring for maximum deflection with a 1 inch stainless steel nut for mounting. Made with Corrosion Resistant Materials Spring Base for Maximum Deflection Superior Electrical Performance Designed to Meet All MOD Specifications UM004AB Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y17850) www.hascall-denke.com 2000-2500 MHz MVDP2.0-2.5-4 Omnidirectional Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:        2000‐2500 MHz         Gain:                                4.0 ~ 5.0 dBi         VSWR:                             2.0:1 Typical         Input Impedance:         50 Ω Nominal         Power:                             25 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  20°   DC Short:                        Yes          Input Connector:           Type N Female  MECHANICAL:      Overall Height:               20 in. (0.51 m)         Radome Base:                1.50 in. OD (38.1 mm)         Radome Main:               1.25 in. OD (31.8 mm)         Net Weight:                    1.2 lb. (0.55 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Stainless Steel Base                                                 (1”‐14 UNF Threaded Base Nut)    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y17850) www.hascall-denke.com 2200-2400 MHz MVDP2300 Mobile Dipole Antenna The MVDP2300 antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 2200-2400 MHz band. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y04500) www.hascall-denke.com 2200-2400 MHz MVDP2300 Mobile Dipole Antenna Specifications ELECTRICAL:       Frequency Range:        2200‐2400 MHz         Gain:                                2.0 dBi +/‐ .5         VSWR:                             2.0:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                             30 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  90°          EMP Protec on:             Included         Input Connector:            Type N Female    MECHANICAL:      Overall Height:                54 in. (1.37 m)         Net Weight:                     6.5 lb. (2.95 kg)         Opera onal Temps:       ‐40° to +158°F (-40° to +70°C)         Color:                                Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y04500) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-6 Tactical Omnidirectional Antenna The MADP2.2-2.4-6 antenna is designed to be mounted on military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2200-2400 MHz band. Being “ground independent”, this antenna can be used on all types of crafts or vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10270) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-6 Tactical Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:        2200‐2400 MHz         Gain:                                6 dBi +/‐.5         VSWR:                             < 1.5:1 Typical         Input Impedance:         50 Ω Nominal         Power:                             100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  20°          Input Connector:           Type N Female    MECHANICAL:       Overall Height:              18 in. (0.46 m)         Radome Diameter:       1.25 in. (31.8 mm)         Maximum Wind Load: 150 mph (241 km/h)         Net Weight:                    1.0 lb. (0.45 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Environmental‐to‐Navy Shipboard: Yes         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10270) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-7 Tactical Omnidirectional Antenna The MADP2.2-2.4-7 antenna is designed to be mounted on military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2200-2400 MHz band. Being “ground independent”, this antenna can be used on all types of crafts or vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y13550) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-7 Tactical Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:        2200‐2400 MHz         Gain:                                7 dBi +/‐.5         VSWR:                             < 1.5:1 Typical         Input Impedance:         50 Ω Nominal         Power:                            25 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  20°          Input Connector:           Type N Female    MECHANICAL:       Overall Height:              18 in. (0.46 m)         Radome Diameter:       1.25 in. (31.8 mm)         Maximum Wind Load: 150 mph (241 km/h)         Net Weight:                    1 lb. (0.45 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Environmental‐to‐Navy Shipboard: Yes         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y13550) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-9 Tactical Omnidirectional Antenna The MADP2.2-2.4-9 antenna is designed to be mounted on military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2200-2400 MHz band. Being “ground independent”, this antenna can be used on all types of crafts or vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10280) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-9 Tactical Omnidirectional Antenna Specifications GAIN  ELECTRICAL:       Frequency Range:        2200‐2400 MHz         Gain:                                9 dBi +/‐.5         VSWR:                             < 1.5:1 Typical         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  13°          Input Connector:           Type N Female    GAIN VS. FREQUENCY  MECHANICAL:       Overall Height:              29 in. (0.74 m)         Radome Diameter:       1.25 in. (31.8 mm)         Maximum Wind Load: 150 mph (241 km/h)         Net Weight:                    1.5 lb. (0.68 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Environmental‐to‐Navy Shipboard: Yes         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)  VSWR    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y10280) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-10 Tactical Omnidirectional Antenna The MADP2.2-2.4-10 antenna is designed to be mounted on military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2200-2400 MHz band. Being “ground independent”, this antenna can be used on all types of crafts or vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y23000) www.hascall-denke.com 2200-2400 MHz MADP2.2-2.4-10 Tactical Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:        2200‐2400 MHz         Gain:                                10 dBi +/‐.5         VSWR:                             < 1.5:1 Typical         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  13°          Input Connector:           Type N Female    MECHANICAL:       Overall Height:              29 in. (0.74 m)         Radome Diameter:       1.25 in. (31.8 mm)         Maximum Wind Load: 150 mph (241 km/h)         Net Weight:                    1.5 lb. (0.68 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Environmental‐to‐Navy Shipboard: Yes         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y23000) www.hascall-denke.com 2300-2500 MHz MVDP2.3-2.5-7 Omnidirectional Vehicular Antenna The MVDP2.3-2.5-7 antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 2300-2500 MHz band. The antenna is designed to provide maximum Data, Video & Voice performance in a wide range of applications. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion has a spring for maximum deflection with a 1 inch stainless steel nut for mounting. Made with Corrosion Resistant Materials Spring Base for Maximum Deflection Superior Electrical Performance Designed to Meet All MOD Specifications UM004AB Mounting Bracket sold separately. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16300) www.hascall-denke.com 2300-2500 MHz MVDP2.3-2.5-7 Omnidirectional Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:        2300‐2500 MHz         Gain:                                7.0 dBi +/‐ .5         VSWR:                             < 2.0:1 Typical         Input Impedance:         50 Ω Nominal         Power:                             35 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  24°          Input Connector:           Type N Female    MECHANICAL:      Overall Height:               20 in. (0.51 m)         Radome Base:                1.50 in. OD (38.1 mm)         Radome Main:               1.25 in. OD (31.8 mm)         Net Weight:                    1.2 lb. (0.55 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Stainless Steel Base                                                 (1”‐14 UNF Threaded Base Nut)    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16300) www.hascall-denke.com 1710-2170 & 2300-2500 MHz MVDP2.3-2.5-7 & 1710-2170 Dual Input Omnidirectional Antenna The MVDP2.3-2.5-7 & 1710-2170 antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 1710-2170 & 2300-2500 MHz bands. The antenna is designed to provide maximum Data, Video & Voice performance in a wide range of applications whether used in a MIMO, Diversity, or Separate Radio application. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. Dual Input Design MIMO, Diversity, or Separate Radio Ready Superior Isolation Ideal Pattern/Beam Width and Sidelobe Control Designed to Reduce BER (Bit Error Rate) NATO Base Spring Mount Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16150) www.hascall-denke.com 1710-2170 & 2300-2500 MHz MVDP2.3-2.5-7 & 1710-2170 Dual Input Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:         1710‐2170 & 2300‐2500 MHz           Gain:                                 4.0 ~ 5.0 dBi @ 1710‐2170 MHz                                                  6.0 ~ 7.0 dBi @ 2300‐2500 MHz         VSWR:                              1.5:1 ~ 2.0:1 Typical         Input Impedance:          50 Ω Nominal         Power:                             35 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  25° @ 2300‐2500 MHz                                                                     42° @ 1710‐2170 MHz          Input Connector:           (2) Type N Female  MECHANICAL:       Overall Height:              36 in. (0.91 m)         Radome Diameter:       1.25 in. (31.8 mm)         Maximum Wind Load: 150 mph (241 km/h)         Net Weight:                    3 lb. (1.4 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16150) www.hascall-denke.com 2300-2500 MHz MADP2.3-2.5-5AB Omnidirectional Vehicular Antenna The MADP2.3-2.5-5AB antenna is designed to be used in military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2300-2500 MHz band. The antenna is designed to provide maximum Data, Video & Voice performance in a wide range of applications. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y12950) www.hascall-denke.com 2300-2500 MHz MADP2.3-2.5-5AB Omnidirectional Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:         2300‐2500 MHz         Gain:                                 5.0 dBi +/‐ .5         VSWR:                              < 2.0:1 Typical         Input Impedance:          50 Ω Nominal         Power:                             25 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  37°          DC Short:                         Yes         Input Connector:           Type N Female    MECHANICAL:       Overall Height:              12 in. (0.30 m)         Radome Main:               1.25 in. OD (31.8 mm)         Radome Base:                1.50 in. OD (38.1 mm)         Net Weight:                    1.2 lb. (0.55 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y12950) www.hascall-denke.com 2300-2500 MHz MADP2.3-2.5-7 Tactical Omnidirectional Antenna The MADP2.3-2.5-7 antenna is designed to be mounted on military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2300-2500 MHz band. Being “ground independent”, this antenna can be used on all types of crafts or vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y12050) www.hascall-denke.com 2300-2500 MHz MADP2.3-2.5-7 Tactical Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:        2300‐2500 MHz         Gain:                                7 dBi +/‐.5         VSWR:                             < 2.0:1         Input Impedance:         50 Ω Nominal         Power:                             50 Wa s Max         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  20°         DC Short:                         Yes         Input Connector:           Type N Female    MECHANICAL:       Overall Height:              18 in. (0.46 m)         Radome Main:               1.25 in. OD (31.8 mm)         Radome Base:                1.50 in. OD (38.1 mm)         Net Weight:                    1 lb. (0.55 kg)         Color:                               Black/Green/Tan/Grey         Environmental‐to‐Navy Shipboard: Yes         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y12050) www.hascall-denke.com 2300-2500 MHz MADP2.3-2.5-9 Omnidirectional Vehicular Antenna The MADP2.3-2.5-9 antenna is designed to be used in military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2300-2500 MHz band. The antenna is designed to provide maximum Data, Video & Voice performance in a wide range of applications. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y12800) www.hascall-denke.com 2300-2500 MHz MADP2.3-2.5-9 Omnidirectional Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:         2300‐2500 MHz         Gain:                                 9.0 dBi +/‐ .5         VSWR:                              < 2.0:1 Typical         Input Impedance:          50 Ω Nominal         Power:                             100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  14°          DC Short:                         Yes         Input Connector:           Type N Female    MECHANICAL:       Overall Height:              24 in. (0.61 m)         Radome Main:               1.25 in. OD (31.8 mm)         Radome Base:                1.50 in. OD (38.1 mm)         Net Weight:                    1.2 lb. (0.55 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y12800) www.hascall-denke.com 2500-2600 MHz MADP2.5-2.6-10 Omnidirectional Vehicular Antenna The MADP2.5-2.6-10 antenna is designed to be used in military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 2500-2600 MHz band. The antenna is designed to provide maximum Data, Video & Voice performance in a wide range of applications. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y22950) www.hascall-denke.com 2500-2600 MHz MADP2.5-2.6-10 Omnidirectional Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:         2500‐2600 MHz         Gain:                                 10.0 dBi +/‐ .5         VSWR:                              < 2.0:1 Typical         Input Impedance:          50 Ω Nominal         Power:                             100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  14°          DC Short:                         Yes         Input Connector:           Type N Female    MECHANICAL:  GAIN VS FREQUENCY  ELEVATION PLANE PATTERN       Overall Height:              30 in. (0.76 m)         Radome Main:               1.25 in. OD (31.8 mm)         Radome Base:                1.50 in. OD (38.1 mm)         Net Weight:                    1.72 lb. (0.78 kg)         Color:                               Black/Green/Tan/Grey         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)  VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y22950) www.hascall-denke.com 4400-4900 MHz MVDP4.4-4.9-7-D Dual Polarization Omnidirectional Antenna The MVDP4.4-4.9-7-D antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 4400-4900 MHz band. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Typical Port-to-Port Isolation ranges from 31 ~ 45 dB. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y09500) www.hascall-denke.com 4400-4900 MHz MVDP4.4-4.9-7-D Dual Polarization Omnidirectional Antenna Specifications HORIZONTAL ANTENNA E‐PLANE PATTERN  ELECTRICAL:       Frequency Range:         4400‐4900 MHz           Gain:                                7.0 dBi +/‐ .5         VSWR:                              2.0:1 Maximum         Input Impedance:          50 Ω Nominal         Power:                             27 Wa s         Polariza on:                   Horizontal & Ver cal         Port‐to‐Port Isola on:  31 ~ 45 dB Typical         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  27°          Input Connector:           (2) Type N Female  MECHANICAL:  VERTICAL ANTENNA E‐PLANE PATTERN  HORIZONTAL ANTENNA VSWR       Length:                            33.5 in. (0.85 m)         Radome Diameter:        1.5 in. (38.1 mm)         Net Weight:                     4 lb. (1.81 kg)         Opera onal Temps:      ‐40° to +185°F (-40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VERTICAL ANTENNA VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y09500) www.hascall-denke.com 4400-5000 MHz MVDP4.4-5.0-7-D Dual Polarization Omnidirectional Antenna The MVDP4.4-5.0-7-D antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 4400-5000 MHz band. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Typical Port-to-Port Isolation ranges from 31 ~ 45 dB. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y18850) www.hascall-denke.com 4400-5000 MHz MVDP4.4-5.0-7-D Dual Polarization Omnidirectional Antenna Specifications HORIZONTAL ANTENNA E‐PLANE PATTERN  ELECTRICAL:       Frequency Range:         4400‐5000 MHz           Gain:                                7.0 dBi +/‐ .5         VSWR:                              2.0:1 Maximum         Input Impedance:          50 Ω Nominal         Power:                             27 Wa s         Polariza on:                   Horizontal & Ver cal         Port‐to‐Port Isola on:  31 ~ 45 dB Typical         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  27°          Input Connector:           (2) Type N Female  MECHANICAL:  VERTICAL ANTENNA E‐PLANE PATTERN  HORIZONTAL ANTENNA VSWR       Length:                            33.5 in. (0.85 m)         Radome Diameter:       1.5 in. (38.1 mm)         Net Weight:                    4 lb. (1.81 kg)         Opera onal Temps:      ‐40° to +185°F (-40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VERTICAL ANTENNA VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y18850) www.hascall-denke.com 4400-5000 MHz MVDP4.4-5.0-7-DAB Dual Input Omnidirectional Antenna The MVDP4.4-5.0-7-DAB antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 4400-5000 MHz band. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Typical Port-to-Port Isolation ranges from 45 ~ 50 dB. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19400) www.hascall-denke.com 4400-5000 MHz MVDP4.4-5.0-7-DAB Dual Input Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:         4400‐5000 MHz           Gain:                                7.0 dBi +/‐ .5         VSWR:                              2.0:1 Maximum         Input Impedance:          50 Ω Nominal         Power:                             25 Wa s         Polariza on:                   Ver cal over Ver cal         Port‐to‐Port Isola on:  45 ~ 50 dB Typical         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  20°          DC Short:                         Yes         Input Connector:           (2) Type N Female  MECHANICAL:       Overall Height:              40 in. (1.02 m)         Radome Diameter:       1.5 in. (38.1 mm)         Net Weight:                    4 lb. (1.81 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19400) www.hascall-denke.com 4400-5000 MHz MVDP4.4-5.0-9-D Dual Polarization Omnidirectional Antenna The MVDP4.4-5.0-9-D antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 4400-5000 MHz band. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Typical Port-to-Port Isolation ranges from 34 ~ 45 dB. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y14800) www.hascall-denke.com 4400-5000 MHz MVDP4.4-5.0-9-D Dual Polarization Omnidirectional Antenna Specifications HORIZONTAL ANTENNA E‐PLANE PATTERN  ELECTRICAL:       Frequency Range:         4400‐5000 MHz           Gain:                                9.0 dBi +/‐ .5         VSWR:                              2.0:1 Maximum         Input Impedance:          50 Ω Nominal         Power:                             25 Wa s         Polariza on:                   Horizontal & Ver cal         Port‐to‐Port Isola on:  34 ~ 45 dB Typical         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  13°          DC Short:                         Yes         Input Connector:           (2) Type N Female  VERTICAL ANTENNA E‐PLANE PATTERN  HORIZONTAL ANTENNA VSWR  MECHANICAL:       Length:                            40.5 in. (1.03 m)         Radome Diameter:       1.5 in. (38.1 mm)         Net Weight:                    4 lb. (1.81 kg)         Opera onal Temps:      ‐40° to +185°F (-40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VERTICAL ANTENNA VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y14800) www.hascall-denke.com 4800-5200 MHz MADP4.8-5.2 Tactical Omnidirectional Antenna The MADP4.8-5.2 antenna is designed to be mounted on military, commercial, and other vehicles (including marine craft) where reliability is needed most. This antenna works with all radios within the 4800-5200 MHz band. Being “ground independent”, this antenna can be used on all types of crafts or vehicles (metal or non-metal) with no degradation in performance. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Robust and tough, this antenna is housed in a thick fiberglass radome double reinforced at the base and is constructed from corrosion resistant materials for reliability in the harshest environments. The lower portion includes a threaded section with a 1 inch stainless steel nut for mounting. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y11200) www.hascall-denke.com 4800-5200 MHz MADP4.8-5.2 Tactical Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:        4800‐5200 MHz         Gain:                                6 ~ 8 dBi +/‐ .5         VSWR:                             < 1.5:1 Typical                                                2.0:1 Maximum         Input Impedance:         50 Ω Nominal         Power:                            100 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  20°          Peak Gain Angle Ver cal Plane: 0° +/‐ 5°         DC Short:                         Yes         Input Connector:           Type N Female   MECHANICAL:       Overall Height:              15 in. (0.38 m)         Radome Diameter:       1.25 in. (31.8 mm)         Net Weight:                    1 lb. (0.45 kg)         Opera onal Temps:      ‐40° to +185°F (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Environmental‐to‐Navy Shipboard: Yes         Moun ng:                       Stainless Steel Base                                                 (1”‐14UNF Threaded Nut)  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y11200) www.hascall-denke.com 5000-6000 MHz MVDP5.0-6.0-7-D Dual Polarization Omnidirectional Antenna The MVDP5.0-6.0-7-D antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 5000-6000 MHz band. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Typical Port-to-Port Isolation ranges from 31 ~ 45 dB. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19350) www.hascall-denke.com 5000-6000 MHz MVDP5.0-6.0-7-D Dual Polarization Omnidirectional Antenna Specifications HORIZONTAL ANTENNA E‐PLANE PATTERN  ELECTRICAL:       Frequency Range:         5000‐6000 MHz           Gain:                                7.0 dBi +/‐ .5         VSWR:                              2.0:1 Maximum         Input Impedance:          50 Ω Nominal         Power:                             27 Wa s         Polariza on:                   Horizontal & Ver cal         Port‐to‐Port Isola on:  31 ~ 45 dB Typical         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  27°          DC Short:                         Yes         Input Connector:           (2) Type N Female  VERTICAL ANTENNA E‐PLANE PATTERN  HORIZONTAL ANTENNA VSWR  MECHANICAL:       Length:                            33.5 in. (0.85 m)         Radome Diameter:       1.5 in. (38.1 mm)         Net Weight:                    5.0 lb. (2.27 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  VERTICAL ANTENNA VSWR  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19350) www.hascall-denke.com 5000-6000 MHz MVDP5.0-6.0-7-DAB Dual Input Omnidirectional Antenna The MVDP5.0-6.0-7-DAB antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 5000-6000 MHz band. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. Typical Port-to-Port Isolation ranges from 31 ~ 45 dB. Being “ground independent”, this antenna can be used on all types of vehicles (metal or non-metal) with no degradation in performance. Robust and tough, this antenna is housed in a thick fiberglass radome and is constructed from corrosion resistant materials for reliability in the harshest environments. Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19250) www.hascall-denke.com 5000-6000 MHz MVDP5.0-6.0-7-DAB Dual Input Omnidirectional Antenna Specifications ELECTRICAL:       Frequency Range:         5000‐6000 MHz           Gain:                                7.0 dBi +/‐ .5         VSWR:                              2.0:1 Maximum         Input Impedance:          50 Ω Nominal         Power:                             27 Wa s         Polariza on:                   Ver cal over Ver cal         Port‐to‐Port Isola on:  31 ~ 45 dB Typical         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  20°          DC Short:                         Yes         Input Connector:           (2) Type N Female  MECHANICAL:       Length:                            33.5 in. (0.85 m)         Radome Diameter:       1.0 in. (25.4 mm)         Net Weight:                    4.5 lb. (2.04 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                  NATO Standard Four .5” (12.7 mm)                                            Holes, equally spaced on a 4.5”                                             (114.3 mm) Dia. BHC  **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y19250) www.hascall-denke.com 6000-10000 MHz MVDP6.0-10.0-2 Omnidirectional Vehicular Antenna The MVDP6.0-10.0-2 antenna is designed to be used in military, commercial, and other vehicular applications where reliability is needed most. This antenna works with all radios within the 6000-10000 MHz band. The antenna is provided with state-of-the-art radiating elements essential for maximum reliability and superior performance. The lower portion contains a pass thru NMO style mount that gives the user an option to Magnet mount or Surface mount the antenna. Robust and tough, this antenna is housed in a heavy duty Xenoy radome and is constructed from corrosion resistant materials for reliability in the harshest environments. High Impact Resistant Xenoy Radome Low Profile Design Good VSWR 65 Watts Power Handling User Friendly Install & Connection NMO Pass Thru Mount Side Coax Exit or Mag Mount Option Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16100) www.hascall-denke.com 6000-10000 MHz MVDP6.0-10.0-2 Omnidirectional Vehicular Antenna Specifications ELECTRICAL:       Frequency Range:         6000‐10000 MHz         Gain:                                 2.0 dBi +/‐ .5         VSWR:                              < 2.0:1 Maximum         Input Impedance:          50 Ω Nominal         Power:                             65 Wa s         Polariza on:                   Ver cal         Radia on Pa ern:         Azimuth: 360°                                                 Eleva on:  67°          Input Connector:           Type N Female    MECHANICAL:       Overall Height:              5 in. (127 mm)         Radome Diameter:       2 in. (51 mm)         Net Weight:                    1 lb. (0.45 kg)         Opera onal Temps:      ‐40° to +185°F                                                 (‐40° to +85°C)         Color:                               Black/Green/Tan/Grey         Moun ng:                       NMO Pass Thru    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y16100) www.hascall-denke.com 20-512 MHz Series II Diplexer Series II Diplexer The Series II Diplexer is part of our Series II Communications Platform, but can be used separately to isolate a 20-88 MHz (low band) antenna from a 113-512 MHz (high band) antenna. It can also be used to feed two antenna outputs into a single radio input. The Series II Diplexer adds very little loss (less than 1/4 dB at most frequencies) while providing excellent isolation (as much as 60 dB) Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05400) www.hascall-denke.com 20-512 MHz Series II Diplexer Series II Diplexer Specifications GAIN VS. FREQUENCY  0.00 30 ELECTRICAL:  80 130 180 230 280 330 380 430 480 -1.00 -2.00 -3.00 -4.00 GAIN (dB)      Frequency Range:         20‐512 MHz           VSWR:                              2.5:1 Nominal         Crossover Loca on:      95‐113 MHz         Input Impedance:          50 Ω Nominal         Power:                             50 Wa s          Input Connector:           TNC Female         Output Connector:  TNC Female (Low Band 20‐90 MHz)                                           Type N Female (High Band 100‐512 MHz)                                           (Other Connectors Available)  -5.00 -6.00 -7.00 -8.00 -9.00 -10.00 FREQUENCY (MHz) MECHANICAL:       Overall Dimensions:     4 x 2 in. (101.6 x 50.8 mm)         Color:                               Black/Green/Tan/Grey    **Note: This diplexer is broadband and requires no tuning or                         adjustment of any kind by the operator.    **All informa on on this product and the product itself is the  property of and is proprietary to Hascall‐Denke.  **Specifica ons are subject to change without prior  no ce.  Made in the USA P.O. Box 909, Palmetto, Florida 34220-0909 ISO 9001:2008 Certified Tel: 941-723-2833 • Fax: 941-723-1628 (1Y05400) www.hascall-denke.com