Transcript
Part Number
Component Specifications
3880-DIN 47613-EZC EZ-RJ45® Connector See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk
APPLICATION Leviton’s EZ-RJ45 Connectors and EZ-RJ45 Crimp Tool provide quick, cost-effective UTP wire terminations. The connectors feature openings that allow wires to be inserted and extended out the front providing increased performance, wire sequence verification, and no wasted connectors, crimps, or bad terminations. The connectors exceed Category 5e standards when terminated using Leviton’s high-quality EZ-RJ45 Crimp Tool. The crimp tool features a built-in cutter and stripper that crimps and cuts wires in one operation. It accommodates EZ-RJ45 Connectors, and most standard RJ-45 and RJ-11 connectors. This craft-friendly tool features precision ground crimp dies, a full cycle ratcheting mechanism, and steel construction for stength and durability. TM
Meets all applicable standards: Meets FCC part 68.
PHYSICAL SPECIFICATIONS Dimensions:
0.59"H x 0.44"W x 0.88"D
Materials:
Polycarbonate body. Phosphor bronze contacts.
For ELECTRONIC Typical Specs see (.TXT) file on disk.
TYPICAL SPECIFICATION The EZ-RJ45 Connector shall meet FCC part 68 and Category 5e requirements (when used with Leviton's EZ-RJ45 Crimp Tool). It shall be constructed with phosphor bronze contacts and a polycarbonate body. It shall allow UTP wires to extend through the body and out the front to verify wire sequence prior to termination. The manufacturer shall provide a one-year limited product warranty.
WARRANTY INFORMATION • One-year limited product warranty.
DESIGN CONSIDERATIONS • • • •
Clear housing for wire sequence verification. Exceeds Category 5e performance requirements. Insert/Extraction life: 1000 cycles. Terminates both solid and stranded cable.
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005 Spec sheets and updates are also available at www.levitonvoicedata.com.
2222 – 222nd St. SE • Bothell, WA 98021 USA Tel: 1-800-722-2082 / 1-425-485-4288 • Fax: 1-425-483-5270 • Int'l Fax: 1-425-485-9170 • GSA Schedule Available
EZ-RJ45® Connector
STANDARDS COMPLIANCE
EZ-RJ45 Connector
Part Number 47613-EZC
DIMENSIONAL LINE ART See ELECTRONIC FILES for CAD images (.DXF, .DWG, MS-DOS.EPS)
Side View
Front View
0.46˝
0.31˝ 0.59˝
0.46˝
0.88˝
Pin 1
Pin 8
PART NUMBERS Description
Part No.
EZ-RJ45 Connectors
47613-EZC
EZ-RJ45 Crimp Tool
40989-RCT
Residential Tool Kit
40812-RTK
Note: EZ-RJ45 is a trademark of SullStar Technologies, Inc.
For Technical Support Call 1-425-485-4288; in USA call 1-800-824-3005 Spec sheets and updates are also available at www.levitonvoicedata.com. 2222 – 222nd St. SE • Bothell, WA 98021 USA • Tel: 1-800-722-2082 / 1-425-485-4288 • Fax: 1-425-483-5270 • Int'l Fax: 1-425-485-9170 © 2003 Leviton Manufacturing Co., Inc. All Rights Reserved
G-6057/C1-5M/jc
I/3 #1055
