Transcript
Jupiter Series Stand Alone & Modular USB Hub KVM Switch Quick Setting Guide
Rev 1.0
Jupiter Series Quick Setting Guide
1. Application Diagram Jupiter 8 / 16 stand alone USB Hub KVM switch:
Jupiter 8D / 16D modular USB Hub KVM switch:
1
Jupiter Series Quick Setting Guide
2. Package Contents Jupiter 8 / 16 stand alone USB Hub KVM switch: 1 x KVM Switch Unit 1 x 12V DC Power Adapter 1 x Mounting Kit 1 x Daisy Chain Cable (0.9m) 1 x Quick Setting Guide Jupiter 8D / 16D stand alone USB Hub KVM switch: 1 x KVM Switch Unit 1 x Mounting Kit 1 x Quick Setting Guide
3. Local Console Installation Jupiter 8 / 16 - Connect the keyboard, mouse and monitor to the local console port. Turn on the monitor then power on the KVM Switch by plug in the power adapter. Jupiter 8D / 16D – Combine the LCD Console and modular USB Hub KVM switch.
4. PC / Servers Installation USB computer – Use the signal cable with VGA and USB connecter.
5. Hotkey Enter Hotkey twice within 2 seconds. Scroll Lock
Scroll Lock
Space Bar
Command [01~16] [01~08]+ [01~16] [K]+ [ScrLK] / [CapS] / [Num] / [F12] [S] [B] [↑] [↓] PgUp PgDn
Function Switch port (no Chain) Switch port (Slave Live) Change Hotkey Scan Mode start Buzzer On / Off Switch to next port Switch to previous port Switch to next bank Switch to previous bank 2
Jupiter Series Quick Setting Guide
[Home] [P] [U] [R] [Space] [H] [C] [K]
Switch to Bank1-port1 Into password mode ,disable kb/ms Password mode On / Off Change password Open OSD. USB Hub Lock / Unlock Send DDC data to slave Change Hot-key
6. On Screen Display (OSD) OSD Function Key Bank 1~8 Computer01~08~16 PWR PORT HUB Home SPACE SPACE ↑ ↓ PgUp PgDn Enter INS ESC
Indicates the BANK level. Port number (factory default setting). Indicates that a computer is connected to this port . Indicates that an operating control computer port site status. Indicates that an operating hub link to computer port site status. Go back to Master BANK. Press SPACE twice the OSD Menu will into admin control page. Select the computer at the previous port. Select the computer at the next port. Select the previous bank of KVM switches. Select the next bank of KVM switches. Confirm select key. Change Computer name. Exit OSD.
7. Password Security When you power on the KVM Switch the default password setting is ON, Please key in eight words by “00000000”.
3
