Preview only show first 10 pages with watermark. For full document please download

Version 0220x_6.0_0212tg

   EMBED


Share

Transcript

THE DIAPER CORNER™ BABY CHANGING TABLE MODEL NUMBERS: 02205 White 02206 Natural 02207 Cherry Assembly Instructions. Adult Assembly Required. This manual is part of the product and should be saved for future reference. VERSION CODE: 6.0/0212/TG If you need product parts, see Page 2! FOR PARTS/WARRANTY SERVICE: http://www.badgerbasket.com/parts • E-mail: [email protected] Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 3:30 PM CST) Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163 Visit us online at www.badgerbasket.com 6.0/0212/TG BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store or return the product to them. Please go online to http://www.badgerbasket.com/parts for assistance. Most problems are resolved promptly without you needing to leave home. When contacting us, please have this instruction manual, your product model number, and your product version code ready. Your Product Model Number: SEE COVER PAGE Your Product Version Code is: 6.0/0212/TG CARE INSTRUCTIONS: Wipe the table, pad, and safety belt clean with a damp cloth and mild soap as needed. Dry thoroughly. Pad Cover can be machine washed in cold water, gentle cycle and air dry or tumble dry low or no heat. 6.0/0212/TG WARNING - FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH: • READ ALL INSTRUCTIONS before use of this changing table. • This manual is part of the product and must be kept for future use. • Product and/or hardware may include small parts or screws with sharp points. • Choking Hazard! Keep unassembled parts out of the reach of small children. • Use only the changing pad, parts, and hardware provided by Badger Basket. • Do not use the changing table if it is damaged, broken, or missing any parts. • FALL HAZARD - To prevent death or serious injury, always keep baby within arm’s reach. • NEVER leave your baby unattended, not even for a moment, when you are changing Baby’s diaper or dressing your child on the table. • ALWAYS use the safety belt provided; and as an extra precaution keep at least one hand on your baby at all times. • DO NOT allow any children to climb or play on the table. • Periodically check to make sure all the bolts and screws remain tight. • This table is suitable for use with children weighing up to 30 lbs. (13.64 kg). • Buckle child securely using the safety belt whenever child is on the table. • Keep child’s skin/body clear of the safety belt buckle when snapping/ unsnapping to prevent injury. • Buckle is not securly fastened unless you hear an audible “click” to indicate the parts have connected securely together. • NEVER allow child to stand up on the table due to risk of falls and injury or death. • NEVER use the changing table without the safety belt properly installed. • ALWAYS secure the changing pad to the changing surface by placing it onto the top shelf and securing it with the hardware as shown in STEP 5. • Use of this product without following these instructions may result in death or serious injury to your child from falling. 6.0/0212/TG Angle Angle Ax 1 Bx 1 Cx 1 Dx 1 LEFT CENTER FRAME RIGHT CENTER FRAME LEFT SIDE FRAME RIGHT SIDE FRAME Angle Angle Ex 3 Fx 3 Gx 3 Hx 3 FRONT RAILS REAR RAILS LEFT SIDE RAILS RIGHT SIDE RAILS Jx 1 Kx 6 Lx 1 TOP SHELF SIDE SHELVES CHANGING PAD WITH BELT Nx 18 Ox 18 Px 12 6x45mm 6x12mm 6x25mm Sx 2 Tx 12 WASHERS & NUTS PEGS Ix 2 SECOND SHELF & BOTTOM SHELF Mx 1 FABRIC PAD COVER Qx 6 6x20mm Rx 2 4x20mm ALLEN WRENCH SAVE THIS WRENCH FOR FUTURE USE! TOOL REQUIRED (NOT INCLUDED) 1 F O N O O O N N N E T T F O N A O B O O N N E N PLEASE REVIEW ALL STEPS PRIOR TO BEGINNING SO YOU WILL BE FAMILIAR WITH ALL PARTS AND THEIR FINAL POSITIONS. T T N O N O N F O N O E T T TOOL ALLEN WRENCH 2 Nx 12 Ox 12 Ox3 Tx 3 6x45mm 6x12mm Tx 6 P G O T N P P G T N O C P P O T N G P TOOL ALLEN WRENCH Nx3 6x45mm 6x12mm Px 6 6x25mm 3 P H O T N P P H O T N D P P H O T N P TOOL ALLEN WRENCH 4 Nx3 6x45mm Ox3 6x12mm Tx 3 Px 6 6x25mm Q Q J Q Q I Q Q I TOOL ALLEN WRENCH Qx 6 6x20mm 5 M R R L K K S K K S K K TOOL REQUIRED (NOT INCLUDED) 6 Rx 2 4x20mm Sx 2 BUCKLE CHILD SECURELY USING THE SAFETY BELT WHENEVER CHILD IS ON THE TABLE. UNCLIP AND SEPARATE THE BUCKLE BY SQUEEZING THE TABS ON THE SIDES TO RELEASE THE BUCKLE TONGUE FROM THE BUCKLE. PLACE CHILD ONTO CHANGING SURFACE AND SNAP THE BUCKLE AND BUCKLE TONGUE BACK TOGETHER. KEEP CHILD'S SKIN/BODY CLEAR OF THE BUCKLE WHEN SNAPPING AND UNSNAPPING TO PREVENT INJURY. BUCKLE IS NOT SECURELY FASTENED UNLESS YOU HEAR AN AUDIBLE "CLICK" TO INDICATE THE PARTS HAVE CONNECTED SECURELY TOGETHER. NEVER ALLOW CHILD TO STAND UP ON THE TABLE DUE TO RISK OF FALLS AND INJURY OR DEATH. ALWAYS SECURE THE CHANGING PAD TO THE CHANGING SURFACE BY PLACING IT ONTO THE TOP SHELF AND SECURING IT WITH THE HARDWARE AS SHOWN IN STEP 5.