Transcript
音曼（北京）科技有限公司
Version Update Version
Anthor
Modification Notes
1.0
Yinkman
The initial version
1.1
Yinkman
Button Functions 、 LED and ARC indicdation
1.2
Yinkman
BT connection、System Sound and second generation Remote controller
1 / 32
音曼（北京）科技有限公司
Content Introduction .............................................................................................................................................4 Product Package ......................................................................................................................................5 Basic Manipulations ................................................................................................................................6 Power Cables ...................................................................................................................................6 The HDMI Input Connection ..........................................................................................................7 Connect Soundbar to Your TV-Set .................................................................................................8 TV-Set Input Setting ........................................................................................................................8 Front Panel Button Functions ........................................................................................................9 LED Light Indications .....................................................................................................................10 Remote Controller ........................................................................................................................10 Subwoofer Buttons .......................................................................................................................12 Audio Playback and Streaming .............................................................................................................13 HDMI Streaming ............................................................................................................................13 The HDMI Device Setting..............................................................................................................13 AUX Playback .................................................................................................................................13 Bluetooth Playback .......................................................................................................................14 HDMI ARC ......................................................................................................................................14 HDMI Audio Passthrough .............................................................................................................15 Mobile App ............................................................................................................................................16 App Introduction and Download .................................................................................................16 Omnos Play Control Page .............................................................................................................16 Connection Status .........................................................................................................................17 System............................................................................................................................................17 Wi-Fi Connections .........................................................................................................................18 Adaptive Tuning Capability ...........................................................................................................19 Virtual Soundfield Listening Modes .............................................................................................20 Subwoofer Settings .......................................................................................................................21 Advanced Settings.........................................................................................................................21 Upgrade Checking Period.....................................................................................................21 Factory Reset ........................................................................................................................21 HDMI Audio Passthrough .....................................................................................................22 Firmware Upgrading .....................................................................................................................22 OTA (On the Air) Upgrading .................................................................................................22 USB Upgrading or Rescue ....................................................................................................22 Troubleshooting ....................................................................................................................................23 Soundbar or Subwoofer Won’t Power Up or No Sound.............................................................23 No Sound from the Subwoofer ....................................................................................................23 Noisy Output from TV ...................................................................................................................24 No Video Output ...........................................................................................................................24 Omnos Play App Can’t find Omnos or Connection Issue ...........................................................24 No Obvious Surround Effect .........................................................................................................24 Wireless Interference ...................................................................................................................25 2 / 32
音曼（北京）科技有限公司
Bluetooth streaming not working ................................................................................................25 Specifications and Safety ......................................................................................................................26 Important Safety Instructions ......................................................................................................26 Limited Warranty.................................................................................................................................27
3 / 32
音曼（北京）科技有限公司
Introduction Omnos 5.1.2 Soundbar utilizes state of the art audio technology to create lifelike theater sound right in your home. The ‘5’ indicates the horizontal speakers that cover left, right, center rear left and rear right, similar to standard 5.1 audio systems. The ‘1’ stands for the subwoofer channel, which is to create deep bass. The ‘2’ indicates the two height channels located above the listener's head. The cumulative result creates a truly three dimensional sound experience. The Omnos can take any sound format from stereo to multichannel audio as an input signal. The signal processing algorithm then converts the input audio signal to 5.1.2 audio signal. Omnos contains following components: Soundbar Unit - Each speaker in the Soundbar has an independent audio signal that is processed by a digital signal processer. Three face directly at you, two face toward the sides of the room and two face the ceiling to bounce sound for a fully immersive effect. Each speaker unit has its own cavity to deliver superior sound quality while minimizing interference from
speaker
units. The available inputs
include HDMI /3.5mm 4 / 32
音曼（北京）科技有限公司
Analog/Bluetooth/HDMI ARC, also the control buttons for the input switch/ volume control and standby are available in the front panel. Subwoofer - The subwoofer is connected wirelessly to the Soundbar and completes the comprehensive sound package. With a phase-inverted tube structural design and unique grid bottom, this subwoofer makes your bass much more powerful. Remote Controller – Used for the volume control, input switch and power on/off operations. Mobile App - The custom app allows you to control and fine tune your audio for each room. Set your virtual sound field and room tuning preference and switch your devices through a single click. Also the common control such as the listening mode switch, the bass control and volume/input control are included in the Mobile App.
Product Package
Figure 1. Soundbar Package List
5 / 32
音曼（北京）科技有限公司
Figure 2. Subwoofer Connection Package List
Basic Manipulations Below is the user guide for Connections and basic introductions on the functional components.
Power Cables
Place the power adapter into the Omnos Soundbar and the other end into AC socket, wide-range voltage supported from 100V to 240V. Connect the power cable of the subwoofer to the AC socket.
6 / 32
音曼（北京）科技有限公司
Figure 3. Power Cables Connections
The HDMI Input Connection
Connect your most commonly used device such as set-top-box, games console, multi-media players etc to the HDMI 1 port of the Omnos Soundbar, and other devices can be connected to the HDMI2 port.
Figure 4. Available HDMI Devices for HDMI Ports
7 / 32
音曼（北京）科技有限公司
Connect Soundbar to Your TV-Set Connect the HDMI out port to the HDMI input port of your TV. If your TV has an HDMI/ARC interface, it is highly recommended to use this interface to connect the Omnos Soundbar to your TV.
Figure 5. Connect Soundbar to TV-Set
TV-Set Input Setting
Turn on the TV and use the TV-Set remote controller to select the HDMI port that is connected to your Omnos Soundbar as the input for your TV-Set.
8 / 32
音曼（北京）科技有限公司
Figure 6. TV-Set Input Setting
Front Panel Button Functions
Button for volume control. ‘+” for volume up and ‘-‘ for volume down. And if you press the ‘-‘ (volume down button) for more than 5 seconds, system will turn mute.
Input switch for HDMI devices. Also long press the HDMI1 key for 5 seconds, the input switch to ARC.
Input switch to 3.5mm Analog. Mobile phone and other players can stream through 3.5mm cable.
Function button to switch listening mode and also used for the Wi-Fi connection confirmation during the Wi-Fi initialization stage and long press the function key for 5 seconds, the Omnos Soundbar turns to AP (access-point) mode waiting for Wi-Fi devices connecting.
Standby button to power on/off the current Omnos system. Press and hold the botton at the same time for more than 8 seconds, system will restore factory settings
9 / 32
音曼（北京）科技有限公司
Figure 7. Front Panel Button Functions
LED Light Indications There’re 4 LED lights on the Omnos Soundbar front panel, three of which (i.e. the LEDs for HDMI1, HDMI2 and Aux, when the current input is selected, the LED will stay constant) are to indicate the current input and one for current status (i.e. the function button LED). The status indications are as follows.
HDMI1 LED stays constant: the current input is HDMI1 HDMI1 LED blinks slowly: current input is ARC HDMI2 LED stays constant: the current input is HDMI2
AUX LED stays constant: the current input is AUX AUX LED blinks slowly: current input is Bluetooth or Airplay The function LED slowly blinks: some device connects the Omnos for the first time and
waiting for the connection confirmation The function LED fast blinks: the Omnos Soundbar is now in AP mode and waiting for Wi-Fi connection.
The function LED stays constant: currently Wi-Fi is configured and connected.
Remote Controller
The First generation Omnos Remote Controller：Standby/Power Button，HDMI1 input， HDMI2 input，function key for listening mode switch，AUX input，Volume Control keys. Also long press the HDMI1 key for 5 seconds, the input switch to ARC, and long press the function key for 5 seconds, the Omnos Soundbar turns to AP (access-point) mode waiting for Wi-Fi devices connecting.
10 / 32
音曼（北京）科技有限公司
Figure 8. First Generation Remote Controller Keys The Second generation Omnos Remote Controller：Standby/Power Button，HDMI1 input， HDMI2 input，function key for listening mode switch，AUX input，Volume Control keys and four types Virtual Soundfield: Night Mode/Music Mode/Movie Mode/Omnos Mode. Also long press the HDMI1 key for 5 seconds, the input switch to ARC, and long press the function key for 5 seconds, the Omnos Soundbar turns to AP (access-point) mode waiting for Wi-Fi devices connecting.
Figure 9. Second Generation Remote Controller Keys
11 / 32
音曼（北京）科技有限公司
Subwoofer Buttons
Besides the AC cord, there’s a Power Switch button behind the subwoofer. After connecting the power cable of the subwoofer, please press the Power Switch button as well. Then press the Standby Button on the subwoofer to supply power for the sub amplifier. Now you can check the status of the LED Indicator Light, if it blinks, it means the subwoofer is not connected to any Omnos Soundbar. Then you can press the Pairing Button on the subwoofer to repair until the LED Indicator Light turns constant. When you don’t need the Omnos working, you can press the Standby Button for power saving.
Figure 10. Subwoofer Buttons
12 / 32
音曼（北京）科技有限公司
Audio Playback and Streaming HDMI Streaming
You can select the HDMI source (either HDMI1 or HDMI2) for the Omnos Soundbar input through the front panel button or remote controller. Just follow the above chapters for the HDMI input/output connection and TV-Set settings.
The HDMI Device Setting
For better audio performance, it is recommended to switch to ‘raw data’ or ‘bitstream’ for your HDMI input device. This setting could be under the control page like [Settings][Audio][Digital Audio Output]. (For the detailed digital audio output setting, please check your playback device user manual.) Notice: not all audio format could be streamed, if no sound output, there may be compatibility between the HDMI source and sink about the ‘raw data’ or ‘bitstream’ format, you can switch back to “PCM” instead, then there’ll be audio output.
AUX Playback
Figure 11. AUX Audio Streaming You can connect your phone or tablet with a 3.5mm analog cable and switch your Omnos input device to Aux by the front panel button or remote controller. Then you can 13 / 32
音曼（北京）科技有限公司
enjoy the music content on your devices.
Bluetooth Playback
Besides the Aux playback from the mobile or tablet, Bluetooth devices are also supported. Turn on the Bluetooth on your mobile device and search the available device named like “Omnos”. After pairing with Omnos Soundbar, you can stream wirelessly with Bluetooth connection. When you stream audio through Bluetooth, the input of Omnos will switch to Bluetooth automatically and the AUX LED on the front panel with blink slowly to indicate the current input as Bluetooth. When you switch the Bluetooth input to any other input, the Omnos will disconnect the Bluetooth device and if you want to stream through Bluetooth again, you have to pair and stream again.
Figure 12. Bluetooth Streaming
HDMI ARC
If you have a smart TV—that is, one that has an Internet connection and works with streaming services. Firstly, in your TV’s audio settings, make sure the audio output is set to “External Speaker,” or “Receiver” instead of “TV Speakers”. This option is usually in the [Settings][Audio] tab. Then switch the current input to ARC by either the Omnos Play App or the front-panel HDMI1 input button (by long press the HDMI1
input button for 5 seconds). When switching to ARC, the HDMI1 LED on the front-panel will keep blinking slowly. For compatibility, it’s recommended to set the Digital Audio output as PCM in the TV’s audio setting, or some bitstream may not be handled properly on Omnos Soundbar. 14 / 32
音曼（北京）科技有限公司
As the TV’s audio output is switched to “External Speaker,” if you want the HDMI audio passthrough functionality below, you have to switch the TV’s audio output back to “TV’s speakers”, or no sound will be available on your TV.
HDMI Audio Passthrough
You can bypass the Omnos Soundbar and stream directly to your TV by turning on the HDMI Audio Passghrough by turning on [Settings][Advanced Settings][Audio Passthrough]. When you power off the Omnos, the system will turn to HDMI audio passthrough mode if current input is HDMI. To make sure sound playback works well on your TV, please make sure the TV ’s audio setting switch to “TV’s speakers”.
15 / 32
音曼（北京）科技有限公司
Mobile App App Introduction and Download Besides the front-panel buttons and the Omnos remote controller, there’s an “Omnos Play” mobile App provide by Yinkman. To install this app, you can download Android version from link http://www.yinkman.cn/download.html , and search for “Omnos Play” from Apple Store. Then follow the native initialization guide inside the App to connect your Omnos and control it afterwards. IOS QR Code：
Android QR Code：
Figure 13. QR Code for Omnos Play App Downloading
Omnos Play Control Page
Volume Control Ball : slide down for volume down and slide up for volume up. Mute Key in the left-down corner: to mute the Omnos system. Power Button in the down center: Standby or Power on Omnos.
Settings in the right-down corner: more control options inside. Connection Status in the left-up corner: the connection exceptions. Input Switch Button in the up center: Scroll down for input selection.
Virtual Soundfield Modes in the right-up corner: to select the listening mode.
16 / 32
音曼（北京）科技有限公司
Figure 14. Omnos Play Control Page
Connection Status In the left-up corner of the control page, if any connection exception occurs, a small figure will be there to indicate the exception. Exclamation mark for Wi-Fi: there’s no Wi-Fi connection configured for the Omnos, i.e. the Omnos Wi-Fi is not connected.
Exclamation mark for Subwoofer: the subwoofer is not connected to the Omnos Soundbar. Audio passthrough options: When audio passghrough is on, the control of the Omnos will not function except for a few options such as power cycle and input switch. Exclamation mark for system Exception: the new firmware available and you need to upgrade the Omnos firmware. BT Connection function: when Omnos is connected with other device by Bluetooth, The option of Disconnect Bluetooth is ‘NO’. click ‘NO’, option will change to ‘YES’, and this time Omnos will disconnect Bluetooth with the device.
Figure 15. Omnos Play Connection Status Page
System
Device Name: The name for Omnos Soundbar Device My Devices: you may have multiple Omnos, and you can switch between the Omnos Soundbars by their names. 17 / 32
音曼（北京）科技有限公司
Firmware Version: The version for Omnos Soundbar APP Version: the version for you App
Figure 16. Omnos Play System Page
Wi-Fi Connections
When no Wi-Fi is configured for your Omnos, the Function LED will stay blinking fast.
To connect your Omnos to your home Wi-Fi, follow below steps: Turn the Omnos AP mode by long pressing the function button for more than 5 seconds.
Turn on the WLAN of your mobile phone and search for an AP named as “Omnos xxxx” and connect it. Open “Omnos Play” App and connect your Omnos through AP. Go to the [Settings][Wi-Fi] page or the [Connection Status][Wi-Fi] page and search for the available Wi-Fi list for the Omnos Select your Home Wi-Fi and enter the password for your Wi-Fi Then switch your mobile App back to your home Wi-Fi. Switch back to “Omnos Play” App to check the connection with your Home Wi-Fi If connected, now everything is under control
If not connected, repeat all the above stage and ensure you type the correct password for your Home Wi-Fi, you can show the password during the type stage.
When you configure the Wi-Fi for Omnos correctly, the Function LED on the front panel will stay constant.
18 / 32
音曼（北京）科技有限公司
Figure 17. Wi-Fi Connection for Omnos Play
Adaptive Tuning Capability Use the Omnos app to calculate your space and fine tune the Omnos Soundbar for optimal performance. Your Soundbar emanates waves that sweep the room in three dimensions to estimate the volume of the space. The Soundbar then fine tunes its settings for optimal sound effects in that space.
To tune your Omnos, switch to [Settings][Room Tuning] [Room Tuning]
Follow the tuning steps as the App guides, i.e. first set the distance from your listening position to the Omnos Soundbar and start the tuning.
Please keep quiet during the tuning and also make sure you’re not very close to the Omnos Soundbar as the loud sound during tuning process.
19 / 32
音曼（北京）科技有限公司
Figure 18. Tuning Process for Omnos Play
Virtual Soundfield Listening Modes Adjust your listening mode to suit your playback content. The app features four listening modes to choose from: Home Theater, Music, Late Night & Omnos. Each listening mode is optimized for performance in their respective playback content.
Home Theater: Omnos can restore the real life audio effects of all your favorite movies and
TV programs. Get the 3D surround sound effects of the movie theater experience all from the comfort of your couch. Music: This listening mode creates a panoramic surrounding sound field to create a
performance appreciated by any audiophile. The Omnos algorithm optimizes for best audio timbre. Late Night: While watching late night TV, Omnos can reduce the dynamic sound effect in the
program through algorithmic rebalancing techniques so you don't wake up everybody in the house. Omnos: Another 3D soundfield Virtualizer, could be more natural.
20 / 32
音曼（北京）科技有限公司
System Sound
Switch “ON” or “OFF” to enable or disable Omnos System Sound.
Figure 19.Switch of System Sound
Subwoofer Settings
Switch to subwoofer setting page by either [Settings][Subwoofer] or [Connection Status][Subwoofer], there’re three options for adjustment.
Subwoofer Gain: to control the bass power. The bigger, the deeper. Crossover Frequency: the higher this value, the more signal is coming from the subwoofer.
Subwoofer Phase: To adjust the delay between subwoofer and Soundbar. For your listening position, there must be an optimal phase to optimize the bass effect.
Advanced Settings Upgrade Checking Period
Omnos provides the functionality to check the firmware version periodically. You can set the period from [Day], [Week] to [Month] from [Settings][Advanced Settings] [Upgrade Checking Period].
Factory Reset
Omnos provides two approaches to restore the firmware to factory setting. First is to long press the [Function] and [Standby] button for 8 seconds. Secondly, [Settings][Advanced Settings] [Factory Reset] and press the RESET button. 21 / 32
音曼（北京）科技有限公司
HDMI Audio Passthrough Check the HDMI audio passthrough chapter before.
Firmware Upgrading Open Omnos Play App, you can check the firmware and App version from [Settings][System]. Two ways for firmware upgrading are available.
OTA (On the Air) Upgrading
Connect Omnos to your home Wi-Fi, which can access the internet. From Omnos Play page [Settings][System], if latest firmware is downloaded, there will be exclamation mark in the tab [Firmware Version]. After ticking the new version and select the “Yes” when upgrading notifies, the system will enter upgrading stage and a system reboot is required for the new firmware to take effect.
USB Upgrading or Rescue You can also upgrade or totally restore your Omnos system with the USB stick. Download the latest firmware from http://www.yinkman.com/download.html , there
will be upgrade package as well as rescue package. Format your USB drive If you want to upgrade, you can format the USB drive as FAT/FAT32/EXTFAT format
If you want to rescue your system, you can format the USB drive as FAT/FAT32 format Download the package and store the zipped package to the root directory of your USB stick and extract the package to your root directory of USB stick. Plug the USB stick to the USB port of Omnos Soundbar and pull out the power cable of the Omnos Soundbar and wait for 2 seconds and then plug-in the power cable again. The upgrading or rescue will begin automatically and after the upgrading, a fresh reboot is required for the new firmware to take effect.
22 / 32
音曼（北京）科技有限公司
Video usage HDMI ARC usage Video link: https://v.qq.com/x/page/k050564wgr6.html
Troubleshooting Below sections describe the common issues or problems, but still not all are included. If you still have problem, please check the contact information http://yinkman.com/YM-contactus_gb.html and reach us with either email to
[email protected] or phone number.
Soundbar or Subwoofer Won’t Power Up or No Sound
Check the power supply together with the power cable ends and ensure there’s power
supply Unplug the AC cords and wait for a few seconds, and then plug-in again. Check that your source input is turned on.
Check that your Omnos source input is correctly selected.
No Sound from the Subwoofer
Check the power supply for the subwoofer; ensure AC cord is connected at both ends. Check the power button besides the power cable is pressed.
Check the standby button on the top of sub is on and the LED light stays constant. If the LED light blinks, the sub is not paired to the Soundbar, please press the pair button until LED light not blinking.
Some program source may not have the low frequency content. In this case, no sound from sub is normal.
23 / 32
音曼（北京）科技有限公司
Noisy Output from TV
In your TV’s audio settings, make sure the audio output is set to “External Speaker,” or “Receiver” instead of “TV Speakers”.
No Video Output
Check the HDMI out connection and the TV HDMI input connection and ensure the
correct source input for the TV set is selected. Check the source input for Omnos is correctly selected as well. Check the power supply for your source input.
No Audio Output for ARC
Check the Omnos input is switched to ARC and the HDMI1 button LED is blinking. Check the TV’s audio settings, and make sure the audio output is set to “External Speaker,” or “Receiver” instead of “TV Speakers”. Try to set the Digital Audio output as PCM in the TV’s audio setting, or some bitstream may not be handled properly on Omnos Soundbar. Try to power off and power on TV again to check the compatibility for the ARC implementation on your TV.
Omnos Play App Can’t find Omnos or Connection Issue
Check the function button LED status to see if your Omnos is connected to your home Wi-Fi, when connected, the function button LED should stay constant. Make sure Omnos and your mobile device is in the same network. Try to reboot your router if function button LED stays constant and your Mobile Phone is connected to your home Wi-Fi as well. Try to reboot the Omnos system.
No Obvious Surround Effect
Check your source input. The surround effect is minor if your source is low quality stereo. If your source is streamed with 5.1 or even higher quality audio, please check the audio output settings of your source input HDMI device first. Please make sure your players are configured with “Raw Data” or “Bitstream” audio output to Omnos. You can check the user manual of your specific device to see how to configure the audio output.
Also check that no surroundings before the Omnos’ up-firing or side-firing drivers. 24 / 32
音曼（北京）科技有限公司
Wireless Interference
During wireless playback, you may encounter static or other interference. As many wireless devices work at 2.4GHz Wi-Fi bands, so the interference could happen when you stream audio wireless especially when the wireless connection between subwoofer and Omnos Soundbar. Try to move the nearby appliances that may interfere to check the cause of the interference.
Bluetooth streaming not working
Check that you’ve paired with Omnos and audio streaming is started.
Check the AUX button LED light blinks which means current input is Bluetooth. Make sure no other Bluetooth device is streaming. Only one source can be connected to the Omnos at a time. You can disconnect other devices from the Omnos Play App from tab [Settings] [BT Connection] [Disconnect Bluetooth], and reconnect again.
25 / 32
音曼（北京）科技有限公司
Specifications and Safety
Important Safety Instructions
Read and follow the instructions in this manual.
The Omnos is for indoor use only. Clean only with a dry cloth of the recommended cleaner and don’t put the product close to water.
Do not install near any heat sources such as radiators, heat registers, stoves, or other appliances or devices (including amplifiers) that produce heat. Protect the power cord, and the external cables from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point where they exit the Soundbar and subwoofer. Only use attachments/accessories specified by the manufacturer.
Refer all servicing to qualified service personnel. Servicing is required when the Soundbar or subwoofer have been damaged in any way, such as a damaged plug, liquid spilled into or objects fallen into the component, or they have been exposed to rain or moisture, do not operate normally, or have been dropped. Ensure that your house voltage is the correct range (100–240 V/ 60 or 50 Hz AC) for the input power requirement of the Soundbar and subwoofer unit. Unplug this equipment during lightning storms or when it will be unused for long periods of time.
26 / 32
音曼（北京）科技有限公司
Limited Warranty YINKMAN is committed to providing the highest quality products, service and user experience for our customers. One element of this commitment is our after-sales support which incorporates YINKMAN’s extended Limited Warranty Policy. If you have any concerns that are not addressed by this Policy, you may contact YINKMAN at
[email protected].
1. Limited Warranty 1. This Limited Warranty applies only if you purchased the product from a YINKMAN Authorized Reseller and is valid only in the original country of purchase. You can qualify for an extended Limited Warranty f or products sold in countries served by YINKMAN Authorized Service Centers. These countries include:
Austria
Canada
France
Germany
Italy
Spain
United Kingdom
USA
If you purchased your product elsewhere, please refer to the list of YINKMAN Partners and contact your nearest distributor in the country of purchase for details of the limited warranty in your country. 2. YINKMAN warrants the mechanical and electronic components of this product to be free of defects in material and workmanship if used under normal operating conditions for a period of one (1) year from the original date of retail purchase. 27 / 32
音曼（北京）科技有限公司
3. If the product displays any defect within the specified warranty period and such defect is not excluded under clause 4 below, YINKMAN will either repair or replace the product using new or reconditioned products or parts, at its sole discretion. In the event that YINKMAN decides to replace the entire product, this Limited Warranty shall apply to the replacement product for the remaining warranty period of the product replaced. 4. Upon validation of the warranty claim, the repaired or replacement product will be sent to the user with the freight prepaid. 5. Warranty claims other than those indicated above are expressly excluded.
IMPORTANT YINKMAN asks that you retain your purchase receipt. This is the proof of your date of purchase from which the applicable Limited Warranty period shall begin to run. If you are unable to present your purchase receipt, YINKMAN cannot process your request for warranty repair as there is no proof that the claim is within the applicable warranty period. 2. Warranty Service; Return Authorization Number 1. The initial stage of our warranty service, and the best way to find a solution, is to check if the problem can be resolved by our Online Support Service. If you are not able to resolve your issue through this route and you need to request warranty service, please contact us through our online request form to request for a Return Authorization (RA) Number. All requests must be accompanied by a description of the problem, the serial number of the product and a copy of the original sales or purchase receipt. 2. No warranty return shall be accepted without a valid RA number.
28 / 32
音曼（北京）科技有限公司
3. Shipments to Authorized Service Centers for warranty repair without freight prepaid shall not be accepted.
3. Warranty Limitations and Exclusions 1. This Limited Warranty does not cover consumable parts, such as, but not limited to batteries, cables, etc. 2. YINKMAN warrants the following items contained in or with the product to be free from defects in material and workmanship only for a period of ninety (90) calendar days from the date of retail purchase.
Accessories
External power adaptors/PSUs
Cables
Foot switches and remote controls
3. YINKMAN warrants the following items contained in or with the product to be free from defects in material and workmanship only for a period of one (1) year from date of retail purchase:
Switches / Sensors
Loudspeaker drivers or diaphragm assemblies
Any mechanical component that may be affected by externally applied force
Loudspeaker grilles; and
Loudspeaker interfaces.
Drivers or diaphragm assemblies that have burnt voice coils as a result of over / under driving or due to a surge from a power amplifier shall be excluded from the warranty coverage. 4. This Limited Warranty does not cover products that have been electronically or mechanically modified in any way. If the product needs to be modified or adapted in order to comply with applicable local technical or safety standards in any country which is not the country for which the product was originally developed and manufactured, this modification / adaptation shall not be considered a defect in materials or workmanship. This Limited Warranty does not cover any such modification / adaptation, regardless of whether it was 29 / 32
音曼（北京）科技有限公司
carried out professionally or not. YINKMAN shall not be held responsible for any cost resulting from such a modification / adaptation. 5. This Limited Warranty covers only the product hardware. It does not cover technical assistance for hardware or software usage. In addition, it does not cover any software products whether or not contained in the product package, unless expressly provided for in any enclosed software limited warranty. 6. This Limited Warranty shall not apply if the factory-applied serial number has been altered or removed from the product. 7. Free inspections and maintenance / repair work are expressly excluded from this Limited Warranty. If an inspection of the product by YINKMAN shows that the defect in question is not covered by the Limited Warranty, the inspection and/or repair costs shall be payable by the buyer. 8. Product damage or defects caused by the following conditions will not be covered by this Limited Warranty: 0. Improper handling, neglect or failure to operate the unit in compliance with the instructions given in YINKMAN user or service manuals/guides; 1. Connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used; 2. Any Act of God or Nature (such accident, fire, flood, etc.) or any other condition that is beyond the control of YINKMAN.
9. Any repair or opening of the unit carried out by unauthorized personnel (including the user) will void the Limited Warranty. 10. Products which do not meet the terms of this Limited Warranty will be repaired exclusively at the buyer's expense. YINKMAN or its Authorized Service Center will inform the buyer of any such circumstance and request a written order to repair the product. In the event that the buyer fails to submit a written repair order within six (6) weeks of notification, YINKMAN reserves the right to dispose of the product in an appropriate, environmentally friendly manner without liability to the buyer. 11. Authorized YINKMAN Resellers do not sell new products directly in online auctions. Purchases made through an online auction are on an "as-is" basis, and are not covered by this Limited Warranty. Online auction confirmations or
30 / 32
音曼（北京）科技有限公司
sales receipts are not accepted for warranty verification and YINKMAN will not repair or replace any product purchased through an online auction.
4. Warranty Transferability This Limited Warranty is extended exclusively to the original buyer (customer of Authorized Reseller) and is not transferable to anyone who may subsequently purchase the product. No other person (distributor, dealer, fulfiller, retailer, etc.) shall be entitled to give any warranty promise on behalf of YINKMAN. 5. Limitation of Liability Except when required by law, YINKMAN shall have no liability to the buyer under this Limited Warranty for any consequential or indirect loss or damage of any kind. In no event shall the liability of YINKMAN under this Limited Warranty exceed the invoiced value of the product purchased. 6. Complete Agreement This Limited Warranty Policy contains the complete and exclusive warranty terms and conditions between you and YINKMAN. It supersedes all other written or oral communications related to this 31 / 32
音曼（北京）科技有限公司
product. YINKMAN provides no other warranties for this product. 7. Other Warranty Rights and National Law 1. This Limited Warranty does not exclude or limit the buyer's statutory rights as a consumer in any way. 2. All provisions of this Limited Warranty are applicable except those that will run counter to applicable statutory local laws. 3. This Limited Warranty does not detract from any statutory seller's obligations which supersede provisions of this Limited Warranty.
8. Amendment Warranty service conditions are subject to change without notice. Please regularly refer to the latest warranty terms and conditions, and additional information regarding YINKMAN's Limited Warranty at www.yinkman.com.
32 / 32
