Transcript
KC-1000 KC-1350
Vertical Discharge Remote Condenser •V ertical discharge remote condenser is available for K-1000N, K-1350N and K-1800N ice machines. Refer to ice machine specification sheet for equipment dimensions, production capacities, electrical requirements, and ice storage bin compatibility. ondenser operation range from -20°F •C (-29°C) to 120°F (49°C). Can be
convenient location, indoors or outdoors, away from the ice machine. This maximizes ice-making capability and minimizes air conditioning loads by lowering the ambient air temperature at the ice machine.
Installation Information and Dimensions Maximum Location Distance—combined vertical and horizontal distances from ice machine to condenser must comply with guidelines. Maximum Line Length: 100' (30 m)* Maximum Vertical Rise: 35' (10.5 m) above ice machine. Maximum Vertical Drop: 15' (4.5 m) below ice machine. To calculate other acceptable horizontal and vertical combinations, refer to remote condenser installation instructions.
KC-1000 Remote Condenser
Ice Machine
Remote Condenser
K-1000N
KC-1000
K-1350N
KC-1350
K-1800N
KC-1350
*Remote condenser has refrigerant charge for up to 50' (15 m) line length. Over 50' (15 m) requires additional refrigerant charge at time of installation.
Vertical Discharge
•R emote system consists of a remote condenser and interconnecting refrigerant lines. Order ice cube machine, ice storage bin and line set separately.
oolaire remote condenser systems •K effectively dissipate heat at a
REMOTE CONDENSER
installed with up to 20" (50.8 cm) of bottom clearance.
•R emote, air-cooled condenser system improves efficiency and ice production, conserving energy.
Warranty 3-year parts and labor. See warranty statement for complete details.
2110 SOUTH 26TH ST | MANITOWOC, WI 54220 USA | 1-920-682-0161
[ www.kool-aire.com ]
Electric
Typical Installation
Electrical power to the remote condenser is intended to be supplied from the ice machine; however, if necessary, a separate electrical power source can be used.
Remote Koolaire Ice Machine Model
Electrical Service*
Minimum Circuit Ampacity
Maximum Fuse size
K-1000N
208-230/60/1
12.8
N/A
20
N/A
K-1350N
208-230/60/1
18.2
13.6
30
20
K-1800N
208-230/60/1
19.6
13.3
30
20
*230/50/1 available. Shaded box indicates 3 phase. Consult factory. HACR circuit breakers can be used in place of fuses.
KC-1000 Remote Condenser
REMOTE CONDENSER
Vertical Discharge
Koolaire Remote Condenser Condenser
Matching Ice Machine
Electrical Service*
Amperage
KC-1000
1000
208-230/60/1
KC-1350
1350
208-230/60/1
Condenser Model
.23
(62
50"
24.
Weight lbs.
kgs.
1.0
67
30
1.0
69
31
00"
(71
.12
cm)
E
D
Electrical Entrance
C
Discharge Refrig. Line
B F
A
place of fuses. A B C D
Liquid Refrig. Line
G
29.
Refrigerant Lines
28.
Optional 34.00" (86.36 cm) or 38.00" (76.20 cm)
* 2 30/50/1 available. Consult factory. HACR circuit breakers can be used in
Standard Interconnecting
cm)
16"
(74
.06
6.00" (15.24 cm) 3.50" (8.89 cm)
E F G
cm)
3.88" (9.85 cm) 12.13" (30.81 cm)
1.50" (3.81 cm) 6.50" 16.51 cm) Optional 20.00" (50.80 cm) 16.00" (40.64 cm)
KC-1350 Remote Condenser
Line Length
Weight
Model
ft
m
lbs
kg
R(*)K-20-R-410A
20
6
10
4.5
R(*)K-35-R-410A
35
9
15
6.8
R(*)K-50-R-410A
50
15
22
10
50"
29.
.93
(74
cm)
94"
Optional 38.00" (96.52 cm) 34.00" (86.36 cm)
(70
.96
cm)
E
D
Electrical Entrance
C
*RT prefix for Series K-1000N. RL prefix for Series K-1350N and K-1800N. Order separately.
A
Linesets are not precharged. 29.
16"
A B C D
B
Discharge Refrig. Line
F
Liquid Refrig. Line
G 74.
6.00" (15.24 cm)
06 c
m)
3.50" (8.89 cm) 4.00" (10.16 cm) 14.62" (37.13 cm)
2110 SOUTH 26TH ST | MANITOWOC, WI 54220 USA | 1-920-682-0161
5229B ©2014 Koolaire 6/15 Specifications subject to change.
27.
E 1.50" (3.81 cm) F 6.50" (16.51 cm)
G Optional
20.00" (50.80 cm) 16.00" (40.64 cm)
[ www.kool-aire.com ]
