Preview only show first 10 pages with watermark. For full document please download

Vf90 Double Sided Fabric Graphic Lightbox

   EMBED

Share

Transcript

Product Guide Vision Frames 01484 551200 | [email protected] VF90 Double Sided Fabric Graphic Lightbox Double sided LED illuminated fabric frame, suitable for hanging and free-standing applications in straight or curved forms VF90 aluminium profile Profile Section LED boards mounted to internal edges of frame 90mm depth frame Fabric folds over silicone strip for insertion into channel Illumination Frame Specifications Graphic Specifications – Rigid boards with 9 lensed LEDs per 500mm unit – LED boards mounted to internal edges of frame – Colour temperature 6000K – Brightness dependent on size of frame – Power consumption 25W per 500mm board – Operating voltage 12V or 24 DC – Mains voltage 220-240V at 50-60Hz AC – Maximum power supply size 100W – 90mm deep aluminium profile in natural silver anodised finish – Option to powder coat to RAL colour – Sizes from 400mm x 400mm to 15m x 3.1m – No back board required – Can accept cross-beam to increase rigidity for spans of more than 2m – Can be curved and S-bent with radius down to a minimum of 700mm – Can be used to make 3D products such as hanging canopies with use of 3-way, 90 degree corner joints and VF90V vertical profile – Coated fine woven 135gsm polyester fabric – Ink-jet printed with UV flexible inks – Stitched at edge with 15x3mm silicone strip – When setting up artwork, allow 15mm bleed at final size (or equivalent when working below final size) on all four edges. File formats: Illustrator, InDesign, high resolution PDF, all 200dpi minimum at final size Fixing Recommendations – For freestanding applications, a selection of steel feet which bolt through centre channel of profile are available – Can be attached to shell scheme type system or hung by drilling through the outside wall of the profile to reveal internal 13x4mm connection channel