Vfs-20c Core Alignment Fusion Splicer

Transcript

VFS-20C Core Alignment Fusion Splicer G.F.O. Europe SpA FIBRE OTTICHE COMPONENTI & ACCESSORI Corso Unione Sovietica, 529/bis int. 4 - 10135 TORINO Tel.: +39 011 3489550 Fax: +39 011 3489511 E-mail: [email protected] - Internet: www.gfoeurope.it 1． Specification & technical paramter Silica based optical glass fiber: Applicable Fiber 1 SM,MM,NZDS/G655,EDF,EXF ·Cladding diameter ：100 –150um ·Coating diameter ：0.1-1.0mm Cleave Length Standard spec ：16mm Splice Loss SM： Typ.0.02Db; MM: Typ.0.01 dB (Note 1) ·Dispersion shifted fiber Splice Time (Note 2) Typ. 10 seconds heating Time (Note 3) 40mm／60mm sleeve Dimensions 160mm(W)／180mm（D）／202mm(H) Weight 4.1 kg 4 Display 5" LCD,view X and Y axis simultaneously, digital 5 Mode-condition splicing SM-FM fiber 6 Battery/Charger ： Typ.0.04dB 2 ： Typ.40seconds 3 VFS-20C-01 with battery charge function ·Input： 176～264 V（47～63HZ）;·Output： 10.5～15V， 10Ah 7 battery supporting time 90~100 splicing and heating Proof Test Force ·Standard spec. ： Approx.1.96N（200gf） 8 ·Optional spec. ： Approx.4.41N（450gf） Atmospheric pressure (max. altitude ：3500m),temperature and humidity. Program test Automatic calibration by observing cladding axis offset surface tensions 9 during arc discharge 10 11 Wind Resistance Maximum permissible wind velocity: 15m/s Type of Splice Mode AUTO，MANUAL Fiber magnification 200 times Type of Heater Mode 60mm， 40mm， 60Ny8， 40Ny8 and micro sleeves No. of Heater Modes Spot Enactment Storage of Splice Results 8000 splicing time 9 seconds 2.1 Components No. Name Model （1） Arc Fusion Splicer VFS-20C （2） Li-Battery VFS-20C-01 （3） AC adaptor VFS-20C-2 （4） Charger VFS-20C-03 （5） Spare Electrodes VFS-20C-04 （6） Instruction Manual VFS-20C-05 （7） Carrying Case VFS-20C-06 (8) Fig. VFS-20C-07 Cooling salver (9) Charger cord VFS-20C-08 (10) AC Power Cord VFS-20C-03 2.2 Accessary for Operation Coat Stripper Fiber/Pigtail Coat Stripper VCN-104 Clesve Length：φ0.25:6-20mm Fiber Cleaving Tool Fiber Cleaning Tool φ0.9:10-20mm Dispenser （Purity:more than 99%） Lint-free tissue or Gauze Thin Cotton Swab 2.3 Description and Function of Splicer 2.3.1．Main Body of Splicer： Tube Heater Handle Wind Protector Panel Keyboard RS232 Video output lock Swith and Plugs LCD Monitor Battery/DC adaptor/AC adaptor 2.3.2．Power Supply Switch and Plugs Power Supply Switch and Plugs AC/ DC /OFF Video output RS-232 interface 2.3.3．Panel Keyboard 1. Right Keyboard Key Name Function Heat Starts tube heater temperature cycle Start Starts splicing operation Reset Splicer Reset 2.Left keyboard Key Name L/R alternate MENU Function Manual: left/right alternate 1．Enter Main Menu 2．Confirm Menu EXIT Exit Menu Scroll down 1．Menu:move cursor 2．Manual:move fiber down Scroll up 1． Menu: move curso 2．Manual:move fiber up Scroll right 1．Menu: increase parameter 2．Manual:move fiber right Scroll left 1.Menu: decrease parameter 2．Manual:move fiber left