Transcript
VHF NGP Antenna 1/2, 2.4dBi, NMO p/n 30-587321-01
This antenna type is a 1/2 wave whip with a base loaded matching coil. It has a power handling capacity of 200 watts. This antenna type is manufactured using the finest corrosion resistant materials and finishes available. The base is triple plated chrome brass. The large diameter low loss coil form is insert molded and features a gold plated spring loaded contact. This antenna type requires no ground plane and provides flexibility in any mounting application. This antenna type is suitable for AW200BT and AW225BT radio modems with 14-57811502, 14-578117-02, and 14-578116-02 cable types.
VHF NGP Antenna 1/2, 2.4dBi, NMO
Electrical Frequency
220-225 MHz
Gain
2.4 dB
VSWR
<1.5:1 unless otherwise noted, <2:1 for Lowband.
Radiation Pattern
Omni directional
Impedance
50 ohms
Max power
200 watts
Mechanical Radiator
Stainless steel whip
Base
ABS material
Contact
Gold plated, spring loaded
Connector
NMO
Mounting
3/4”, 3/8”, Magnetic and Mini-Trunk mounts.
Length
31.5”
Compatibility
AW200BT, AW225BT with 14-578115-02, 14-578117-02, and 14-578116-02 cable types
ADAPTER WITH NO THRU HOLE
RUGGED .125 TAPERED STAINLESS STEEL ROD
NEOPRENE SEAL
NICKEL CHROME PLATED BRASS CAP
SOLID COPPER WIRE
MOLDED LOW LOSS COILFORM
DOUBLE STEP SEAL
UV INHIBITED ABS HOUSING FOR ENVIRONMENTAL PROTECTION
STAINLESS STEEL SPRING WITH GOLD PLATED CONTACT
NICKEL/CHROME PLATED BRASS BASE
O RING SEAL
Specifications are typical and subject to change without prior notice
ArWest Communications Corp. 900 Rock Avenue, San Jose, CA 95131 Tel+1 408 770 1790 Fax: +1 408 770-1799 Email:
[email protected] © 2013 ArWest Corp.
www.arwestcom.com Revision 1.1 March 21, 2013
