Transcript
Vi1054VP UTP Transmitter-Combiner with 12 VDC Converter
Features
• Combines video and power into a single RJ-45 4-pair cable • Up to 3,000 ft. (930 m) with Vigitron Active Receiver Hubs • Up to 750 ft. (225 m) with Vigitron Passive Receiver Hubs • Built-in passive transceiver • Built-in surge protection for video • Support for "up-the-coax" type signals • 60 dB cross talk and noise immunity • Compact size and easy installation • Designed for structured wiring applications • Limited lifetime warranty
Power Distance Chart Power Supply Voltage Voltage at Vi1054VP
Applications
100 mA Camera
• Security and surveillance • Department store security • Casino security • Hospitals and airports • School campuses
300 mA Camera
24 VAC 16 VAC
28 VAC 16 VAC
2,980 ft. Dual 24 AWG 908 m 3,760 ft. Dual 23 AWG 1,146 m
4,475 ft. 1,364 m 5,640 ft. 1,719 m
995 ft. 303 m 1,254 ft. 382 m 500 ft. 152 m 627 ft. 191 m
1,490 ft. 454 m 1,880 ft. 573 m 745 ft. 227 m 940 ft. 286 m
Dual 24 AWG Dual 23 AWG
600 mA Camera
Dual 24 AWG Dual 23 AWG
Cat-5 : 24 AWG, Cat-6 : 23 AWG
The Vi1054VP is a passive video transmitter (non-amplified) device that includes a 24 VAC to 12 VDC converter to power cameras for distances up to 3,000 feet (930 m) over a single Cat-5 cable. Its compact size makes it easy to be mounted directly in the back cameras for a variety of applications. The power distribution from the control room over UTP will be 24 or 28 VAC. The Vi1054VP makes it pssible to use 12 VDC cameras in a 24 VAC power system. For shorter runs, it can be used with Vigitron Vi1200 or Vi1500 series combiner-receivers. While longer distances can be achieved by using it with Vi1300 or Vi1400 series combiners and Vigitron active UTP receivers. It connects to cat-5 cable via its RJ-45 connector and its 12 VDC power output is available on a 9 in. pigtail wire. The Vi1054VP has built-in surge suppression to protect video equipment against damaging voltage spikes. Its exceptional noise immunity ensures quality video signals. The Vi1054VP is an ideal CCTV component for a structured cabling environment.
Application Diagram Cam # 1
Cat-5
Camera w/ Zoom Power
Vi1516VPD; 16-Ch Powered VPD Combiner w/RX Cat-5
Analog Matrix Switch
110 V AC or 220 VAC
Cam # 2
Fixed Dome Camera
1053VPD
Video
Power Data
Cat-5
Cam # 3
1053VPD
Dome Camera
Data
Local Power
RoHS
The Smart Choice for Quality Video
www.vigitron.com © Copyright 2012 Vigitron, Inc.
Technical Specification Electrical
Ordering Information
Video Format Frequency Coax Twisted Pair
NTSC, PAL, SECAM DC to 10 MHz 75 Ohm 100 Ohms +/- 20%, 24 AWG minimum up to 3,000 ft. (930 m) unshielded Category 2-7 CMRR 60 dB Insertion Loss 0.3 dB Input Voltage 30 -16 VAC/DC, Class II SELV Output Voltage 12 VDC, regulated, 30 mV ripple maximum Output Power 600 mA maximum Connectors UTP: RJ-45 Video: Male BNC Power: 9 in. twisted pair Transient Immunity ANSI / IEEE 587 C62.41
System Configuration Vi1054VP
750 ft. 228 m
Mechanical Dimensions Weight Material
ft. Maximum Cable 3,000 915 m Distance
VPDCombiner Hubs
VPD Combiners w/RX Model Channels 4 Vi1204VPD 16 Vi1216VPD 8 Vi1508VPD 16 Vi1516VPD
Environmental Humidity Temperature
Description 12 VDC Video-Power Combiner
PART No. Vi1054VP
0 to 95%, non-condensing Operating: -10°C to +50°C Storage: -30°C to +70°C
Channels 4 16 8 16
Model
Vi1304VPD Vi1316VPD Vi1408VPD Vi1416VPD
Active Receivers Model Channels 1 4 8 16 32
1.5x1.25x0.8 in., 3.8x7.1x2 cm (HxWxL) 0.06 lb (25 g) Grey ABS plastic, UL rating of 94V-0
Vi6100VR/Vi6200VR Vi6104/Vi6204 Vi6108/Vi6208/Vi6308 Vi6116/Vi6216/Vi6316 Vi6132/Vi6232/Vi6332
2,000 feet (610 m) for Vi6200 series
Camera Connections:
*Specifications subject to change without notice.
Pin# 1 2 3 4 5 6 7 8
1.25" 1
Description Video + Video Data + Power Power + Data Power + Power
0.8"
8
1.5"
Vi1054VP
12 VDC Combiner www.vigitron.com
Wire and Cable Recommendations The Vigitron products are designed to be used with unshielded twisted pair (UTP) wiring. The UTP wire must be 24AWG - 12AWG or Category 2-7 cable. Multi pair cable with an overall shield is acceptable, however individually shielded pairs should be avoided. Multiple UTP video feeds can be operated in the same communication cable along with telephone, computer, control signals and low power voltages. While UTP video may be routed through punch-down block terminals, any resistive, capacitive or inductive devices (such as T-taps or MOV's) must not be used. Please contact Vigitron for more specific information regarding wire types and proper installation techniques. TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 7810 Trade Street, Suite 100, San Diego, CA 92121, USA •
[email protected] • www.vigitron.com © Copyright 2012 Vigitron, Inc.
