Transcript
Vi1062
Isolated Video Balun
Features
• Quality color and B&W video up to 750 feet (228 m) of unshielded twisted pair wires • 3,500 feet (1,066 m) with Vigitron active receivers • NTSC, PAL , and SECAM video formats • Support for "up-the-coax" type signals • No power required • Built-in differential surge protection • 60 dB crosstalk and noise immunity • 500V DC isolation voltage • Compact size and easy installation • Compatible with all qualified UTP cameras • Limited lifetime warranty
Applications
• Security and surveillance • Casino security • Hospitals and airports • School campuses
The Vigitron Vi1062 is a passive transceiver that includes a built-in video isolation transformer and transports video signals over unshielded twisted pair wires, point-to-point, for distances up to 750 feet (228 m). Distances up to 3,500 feet (1,066 m) can be achieved when it is used with Vigitron active UTP receivers. It uses Category 2-7 twisted pair wires, is easy to install, cost effective, and does not require power. The annoying and potentially damaging hum bars on the screen are caused by ground voltage potential differences between your video equipment that is called ground loop. The Vi1062 provides complete isolation between devices and eliminates video hum bars, ground loops, and DC offsets which can degrade picture quality and potentially damage the video equipment. Its wide bandwidth and low insertion loss makes it an ideal solution for eliminating ground loop problems for a wide variety of applications. The Vi1062 has built-in surge suppression to protect video equipment against damaging voltage spikes. Its crosstalk and noise immunity ensure quality video signals. The Vi1062 offers quality video in a compact size.
Application Diagram Cat-5
Cat-5
DVR
Cat-5
16 Coax Jumpers
Vi1016 16-Ch. Passive Receiver
The smart choice for quality video
RoHS
www.vigitron.com DSVi1062_0212
Technical Specification* Electrical
Video Format NTSC, PAL, SECAM Frequency 20 Hz to 5.5 MHz Input Impedance 75 Ohm Output Impedance 100 Ohm Max. Output Level 4 Vpp/75Ω Insertion Loss 0.8 dB Power No power required Connectors Camera side: Male BNC UTP side: Screw-less terminal block Isolation Voltage 500V DC Insulation Resistance 100M Ohms
Environmental Humidity Temperature
Mechanical Dimensions Weight Material
Ordering Information
System Configuration
0 to 95%, non-condensing Operating: -10C to +70C Storage: -30C to +70C 1.3x0.9x2.5 inches (33x23x64 mm) 5.6 oz (162 g) ABS
750 ft. 228 m
3,500 ft. Maximum Cable 1,066 m Distance
Passive Transceivers Channels Model 1 4 8 16 32
*Specifications subject to change without notice.
Description Isolated Video Balun
PART No. Vi1062
VB1001F/M VB1007M Vi1001F/M/P Vi1003M Vi1006M Vi1004 Vi1008 Vi1016 Vi1032
Active Receivers Model Channels 1 4 8 16 32
Vi6100VR/Vi6200VR Vi6104/Vi6204 Vi6108/Vi6208/Vi6308 Vi6116/Vi6216/Vi6316 Vi6132/Vi6232/Vi6332
2,000 feet (610 m) for Vi6200 series
0.17"
Vi1062
www.vigitron.com
Isolated Video Balun
0.93”
1.3”
2.5"
12"
0.9’ TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205 7810 Trade Street, Suite 100, San Diego, CA 92121, USA •
[email protected] • www.vigitron.com © Copyright 2010 Vigitron, Inc.
