Transcript
ARM-based Systems NEW
VIA
ARTiGOA800
Fanless Low Profile Embedded System by ARM Pico-ITX Board with MiniHDMI, VGA and USB 2.0
Features
Specifications
Fanless and ultra slim low profile (only 3cm height)
Part Number Computing System System Memory
Powered by Freescale Cortex-A8 single core i.MX537 with Pico-ITX board
Flash Graphic
1GB high performance DDR3 SDRAM Supports integrated graphics processing (GPU) for 3D/2D graphics acceleration and dual displays (clone mode) Standard temperature support from 0°C to 50°C
Processor Technology & Max. Capacity Capacity Controller
CRT Interface HDMI Interface Ethernet
Controller
Serial
Interface Controller Interface USB
Storage Interface
Interface
System Indicator Watch Dog Timer
Power Status LED Output
HD Audio
Supports four USB 2.0 ports Supports Android and Linux Ubuntu operating systems Dust proof VESA mount support
Onboard I/O Front Panel I/O Coastline Connectors Connectors
Rear Panel I/O Connectors
Power Supply
ARTIGO A800-1S08A1 800MHz Freescale Cortex-A8 single core i.MX537 1GB DDR3-800 SDRAM using 128M x16 memory devices 4GB onboard eMMC Flash memory Supports two integrated graphics processing units: an OpenGL® ES 2.0 3D graphics accelerator and an OpenVG™ 1.1 2D graphics accelerator 1 x Onboard VGA port Silicon image SiI9024A HDMI transmitter 1 x Onboard Mini-HDMI port SMSC LAN8720A 10/100 PHY transceiver with HP Auto-MDIX support 1 x RJ45 connector Freescale SGTL5000 low power stereo codec with headphone AMP Supports Line-In, Line-out, Mic-in connectors SMSC USB 2.0 high speed 4-port hub controller 4 x USB ports, USB 2.0 compliant - 2 x USB connectors on rear I/O - 1 x USB connector - 1 x USB 2.0 pin header on front I/O supporting optional VIA 802.11n wireless module VNT9271 4GB onboard eMMC Flash memory 1 x Onboard Micro SD connector 1 x Power button with blue color LED Integrated watch dog timer supporting two comparison points. First comparison point can interrupt ARM core, and the second comparison point is capable of generating external interrupts on WDOG line Line-out, Mic-in, Line-in 1 x Power on/off switch with PWR LED 1 x USB 2.0 connector (If it does not assembly wireless module, additional one USB 2.0 is supported on right side of front I/O) 1 x Mini-HDMI port 1 x VGA connector (1 x DB-15) 1 x 10/100Mbps Ethernet connector (1 x RJ-45) 2 x USB 2.0 connectors 1 x DC Jack power input connector 1 x Antenna hole Open Window with removable door plate to access the Micro SD flash drive DC 5V 1 x DC power input with DC Jack
Bottom Opening Cover Input Voltage Power Input Connector Power Consumption Typical: 3.14W
Front Panel External I/O
Rear Panel External I/O LAN
USB ports Power on/off
MIC in Audio in Audio out
DC in 5V
USB ports
VGA
Mini-HDMI
Specifications Part Number Mechanical
Construction
Environmental Specification
Inside WiFi Mounting Dimension Operating Temperature Storage Temperature Relative Humidity EMC Approved Operation System
Software Compatibility
ARTIGO A800-1S08A1 Aluminum top cover Metal chassis housing Support 75 mm x 75 mm VESA mount Built-in mounting hole on P910-C for VIA VNT9271 WiFi module inside system 120 mm (W) x 30 mm (H) x 125 mm (D) (4.72" x 1.18" x 4.92") With onboard eMMC: 0°C up to 50 °C With Micro SD: 0°C ~45°C 10°C ~60 °C@ 90%, non-condensing 0 ~ 90% @ 45°C, non-condensing CE, FCC, Class A Android 2.3 Embedded Linux 2.6
Ordering Information Part Number ARTiGO A800-1S08A1
Optional Accessories System Built-in CPU i.MX537 @800MHz
Description ARTiGO System with Freescale Cortex-A8 i.MX537 800MHz, 4GB Flash, 1GB DDR3 SDRAM, 4 x USB 2.0, 1 x Mini-HDMI, 1 x VGA, 1 x LAN, 1 x DC-in Power, 1 x Micro SD Slot
Dimensions
Part Number EMIO-1533-00A1
Description 802.11 b/g/n Wireless LAN USB module
Packing List
30 33
1 x AC-to-DC adapter 1 x COM port cable 2 x Jumpers 4 x VESA mount screws
125 120
Unit: mm
* All product specifications are subject to change without notice. Update: Mar. 06, 2013.
www.viaembedded.com
