Transcript
Test, Inspection and Locate
Viavi Certifier 40G™ Data consumption has exploded in the past few years and enterprise network owners are scrambling to meet the demanding requirements of 40G and beyond to serve their buildings, data centres, and campuses. New technologies are driving change in every aspect of enterprise networks – new industry standards, new topologies, new types of connectivity, new test methods, and certainly new challenges for designers and technicians. Everything in the enterprise is new! Our customers tell us that their old tools are insufficient for new enterprise networks. The Viavi Certifier40G equips technicians with all the capabilities they need to certify both copper and fibre networks quickly, completely, and correctly for all current and future cabling standards for the new enterprise. Features and Benefits • • • • • • • • •
Achieve complete network certification with one device Optimise productivity with the industry’s fastest test workflow Obtain comprehensive results for the latest TIA-568 and ISO 11801 requirements View test set up and results data and edit labels at both local and remote ends Permanent link and channel adapters for certifying to TIA category 5e/6/6A and ISO class D/E/EA/F/FA Multimode (850/1300 nm) and singlemode (1310/1550 nm) adapters for Tier 1 fibre certification (loss/length/polarity) Multimode (850 nm) MPO adapters for certifying and troubleshooting MPO links and trunks Industry-leading Viavi P5000i digital fibre end-face inspection probe support Integrated, standards-based certification labeling and reporting
Drive User Efficiency Applications • Complete TIA 568/ISO 11801 copper and fibre certification • TIA-942-A data centre certification • Certify plug-and-play (trunk/cassette) fibre connectors with MPO connectors • Objective pass/fail testing for IEC 61300-3-35 fibre end-face requirements
The Certifier40G is not only the most advanced solution available, it is also the fastest and most complete. Whether certifying copper or fibre, users will get the job done right and on time…the first time! • The industry’s fastest CAT6A solution can certify each cable within 9 seconds, saving users 30 minutes each time they test 150 CAT6A cables* • Tier 1 certification of multimode, singlemode and multimode MPO fibre in less than 6 seconds • Automate pass/fail end-face analysis for all fibre types • Gain complete test visibility at both local and remote ends • Pre-configured with all leading manufacturer’s cabling specifications * Time savings based on CAT6A cable testing with other existing cable certifiers.
Australia: 1300 232 476 or www.AFLglobal.com/au New Zealand: 09 927 7140 or www.AFLglobal.com/nz
© 2002-2015, AFL, all rights reserved. 0938, Revision 1, 28.09.15 Specifications are subject to change without notice.
1
Test, Inspection and Locate
Viavi Certifier 40G™ The Only Category-8-Ready Certifier Copper cabling systems are rapidly evolving to support the new enterprise. With the IEEE working to ratify 802.3bq (40GBase-T) and TIA moving quickly to ratify Category 8 cabling systems, the need to test cabling systems to beyond 2000 MHz is on the horizon. The Viavi Certifier40G is the only certification tool on the market today that is ready for these new standards. The Viavi Certifier40G has been ETL verified to ANSI/TIA-1152 Level IIIe, IEC 61935-1 Levels IIIe and IV, and currently proposed Level V draft accuracy specifications. The current IEC 61935-1 proposed Level V draft accuracy standard addressed the needs up to Class FA (1000 MHz). The Viavi Certifier40G is accurate beyond 2000 MHz and, therefore, will support the latest standards being developed to protect your investment. Easily Test 10/40/100 G MPO Links In new enterprise architectures, the use of parallel optics has become essential to achieve the demand for high-speed 40G and 100G transmission. From active media incorporating quadrature small form-factor pluggable (QSFP) transceivers to using trunk cables and cassettes, MPO connectivity is essential for delivering speeds of 40 G and beyond in the enterprise. • • • • • •
The industry’s only modular certifier with MPO test capability Test MPO to LC/SC Discover or ensure correct polarity with Fibre Map Conduct 5 second loss and polarity tests on 12 fibres Display absolute and relative power levels Measure MPO power on live systems
Inspect Fibre End Faces with Pass/Fail Analysis Dirty connectors are the No. 1 cause for troubleshooting in optical networks. Microscopic dirt particles create enough signal loss and back reflection to cause significant network errors and downtime. Proactively inspecting fiber end faces is critical for testing and certifying a fiber network. The Telecommunications Industry Association (TIA) recently revised TIA-568 to establish quality and cleanliness acceptance criteria for fibre connector end faces when testing optical connections. Whether using TIA-568 or customer-specific requirements, users can easily inspect and certify fibre connector end faces with automated pass/fail analysis at the push of a button on the Certifier40G to get the job done quickly and correctly. • • • • •
Prove compliance to the new TIA-568 end-face inspection requirements Get fast results at the push of a button Eliminate subjectivity with automated pass/fail analysis Ensure your network is optimised for a lifetime of performance Prevent costly network downtime and time-consuming troubleshooting
Australia: 1300 232 476 or www.AFLglobal.com/au New Zealand: 09 927 7140 or www.AFLglobal.com/nz
© 2002-2015, AFL, all rights reserved. 0938, Revision 1, 28.09.15 Specifications are subject to change without notice.
2
Test, Inspection and Locate
Viavi Certifier 40G™ The Complete Tier 1 Test Solution Voice and video, cloud computing, and virtualisation are driving an increasing demand for fibre-cabling networks. To guarantee that these new fibre networks can handle higher data rates, they must be certified based on the TIA 568 and ISO 11801 industry standards, which specify the insertion loss and length requirements for each type of fibre optic cabling. The Viavi Certifier40G fibre test adapters quickly and accurately certify any fibre cabling installation. These adapters complement an existing, comprehensive copper-cabling feature set, letting structured-cabling installers and professionals perform all their fibre and copper certifications with the same, easy-to-use tool. • Perform automated pass/fail certification tests in less than 6 seconds to ensure installation meets TIA 568 and ISO 11801 industry standards • Two complete user interface touch screens show full fibre results at both ends giving technicians complete results for all fibres and all wavelengths – not just a pass/ fail light Visibility at Both Local and Remote Ends The revolutionary Touch2 design, with an intuitive touch screen at both ends, makes using the Certifier40G the easiest cable tester ever. A full screen at both ends minimises the users’ walking time in the field by initiating, viewing, and storing tests from either side of a link or channel. Unlike legacy testers, dual-ended fibre tests let installers at each test end quickly determine the problem cable. • • • •
See what failed – not just that you have a failure Speed up your troubleshooting One-user operation Provides simple step-by-step guidance to users with a repeatable, easy to follow process
Australia: 1300 232 476 or www.AFLglobal.com/au New Zealand: 09 927 7140 or www.AFLglobal.com/nz
© 2002-2015, AFL, all rights reserved. 0938, Revision 1, 28.09.15 Specifications are subject to change without notice.
3
Test, Inspection and Locate
Viavi Certifier 40G™ Ordering Information PART NUMBER
DESCRIPTION Base
JDSCERT40G-FA (Base Kit) JDSCERT40G-FA/MMEF JDSCERT40G-FA/SM JDSCERT40G-FA/MMEF/SM
JDSCERT40G-FA/MPO JDSCERT40G-FA/MMEF/MPO
JDSCERT40G-FA/MMEF/SM/MPO
KIT CONTENTS MMEF SM
MTP/MPO
Certifier40G CAT6A Kit Certifier40G CAT6A + MMEF Kit Tier 1 Multimode Encircled Flux Certifier40G CAT6A + SM Kit Tier 1 Singlemode Certifier40G CAT6A + MMEF + SM Kit Tier 1 Multimode Encircled Flux Tier 1 Singlemode Certifier40G CAT6A + MTP/MPO Kit Multimode MTP/MPO Certifier40G CAT6A + MMEF + MTP/MPO Kit Tier 1 Multimode Encircled Flux Multimode MTP/MPO Certifier40G CAT6A + MMEF + SM + MTP/MPO Kit Tier 1 Multimode Encircled Flux Tier 1 Singlemode Multimode MTP/MPO Kit
Base Kit Contents • • • • • • • • •
Local and Remote units /w screen covers and stylus 2 x power adapters 2 x Cat 6A Permanent Link adapters w/ permanent link test cords 2 x Cat 6A Channel adapters Large soft carry case Calibration certificate Quick start guide USB drive with reporting software and user manual 2 headsets for talk set functionality
Test Adapter Configuration and Accessories MMEF 2, Combined LS/PM
SM 2, Combined LS/PM
Wavelengths Tx Interface Rx Interface Test Leads
850/1300 nm Fixed FC/UPC SC Standard/LC Optional 2 x Simplex SC EF Launch Cords 2 x Simplex SC Tail Cords
1310/1550 nm Fixed SC/UPC Fixed SC/UPC 2 x Duplex SC Cords
Test Method
1 or 3 Cord
1 Cord (SC Only) 3 Cord
Test Adapter Qty
Australia: 1300 232 476 or www.AFLglobal.com/au New Zealand: 09 927 7140 or www.AFLglobal.com/nz
MTP/MPO 1 x Light Source 1 x Power Meter 850 nm MPO, Type A, Male MPO, Type A, Male 2 x Type A Test Cords 1 x Type A Reference Cord 1 x Type B Reference Cord NA
© 2002-2015, AFL, all rights reserved. 0938, Revision 1, 28.09.15 Specifications are subject to change without notice.
4
Test, Inspection and Locate
Viavi Certifier 40G™ Additional Test Adapters PART NUMBER JDSCERT40G-ADPT-FA-CH JDSCERT40G-ADPT-FA-PL JDSCERT40G-ADPT-CAT6A-CH JDSCERT40G-ADPT-CAT6A-PL JDSCERT40G-ADPT-CAT6A-PC JDSCERT40G-ADPT-CAT6-PC JDSCERT40G-ADPT-CAT5E-PC JDSCERT40G-ADPT-COAX
DESCRIPTION Certifier40G FA Channel Adapters /w Ref Test Lead Certifier40G FA Permanent Link Adapters /w Ref Test Leads Certifier40G CAT5E/6/6A Channel Adapter Pair Certifier40G CAT5E/6/6A Permanent Link Adapter Pair Certifier40G CAT6A Patchcord Adapters Certifier40G CAT6 Patchcord Adapters Certifier40G CAT5e Patchcord Adapters Certifier40G Coax Adapters (F connector, 75 ohm)
Note: CH = Channel, PC = Patchcord, PL = Permanent Link
Options And Accessories PART NUMBER JDSCERT40G-ACC-ACPACK JDSCERT40G-ACC-BATTERY JDSCERT40G-ACC-CHARGER JDSCERT40G-ACC-HARCCASE JDSCERT40G-ACC-LCADAPT-SM JDSCERT40G-ACC-LCRX JDSCERT40G-ACC-LCMMEF-OM3 JDSCERT40G-ACC-SCMMEF-OM3 JDSCERT40G-PL-6APERMLINK JDSCERT40G-PL-FAPERMLINK
DESCRIPTION Certifier40G AC Pack (1 Pack) Certifier40G Battery Pack (1 Battery) Certifier40G External Charger plus Car Charger Certifier40G Hard case (Viavi Supplied) Certifier40G LC Port Adapter for SM Adapters Certifier40G MMEF LC Rx Port Adapters (x2) Certifier40G OM3/4 MMEF LC Test Lead Kit Certifier40G OM3/4 MMEF SC Test Lead Kit Certifier40G CAT6A Permanent Link Patch Leads Certifier40G FA Permanent Link Patch Leads
Video Inspection and Accessories PART NUMBER JDSVIDKIT-7
DESCRIPTION Digital Certifier Video Inspection Kit, P5000i + 7 Tips
Note: For more video inspection options and accessories, contact your local AFL branch office.
Vendor Approval For a list of vendor approvals, visit the Certifier40G profile at www.viavi.com Related Products • • • • •
AFL Link Loss Test Lead Kits AFL Cleaning and Inspection Products Viavi SmartPocket™ Light Sources and Power Meters Viavi SmartClass™ Fibre Light Sources and Power Meters Viavi OTDR and FiberComplete™
Australia: 1300 232 476 or www.AFLglobal.com/au New Zealand: 09 927 7140 or www.AFLglobal.com/nz
© 2002-2015, AFL, all rights reserved. 0938, Revision 1, 28.09.15 Specifications are subject to change without notice.
5
