Vibe Monitor Stand - The Exhibitors` Handbook

Transcript

Vibe Monitor Stand VB-MK-01 VibeTM is a collection of cleverly-designed state-of-the-art 10’ exhibit booths. Vibe combines light-weight aluminum structures with pillowcase dye-sublimated printed fabric graphics for a truly unique appearance and experience. Vibe is efficient, easy to assemble and disassemble and offers remarkable style options and choices. features and benefits: - State-of-the-art snap button aluminum structure - Frame constructed of 30mm and 50mm lightweight aluminum tube - Choose from four laminate base colors - Brushed silver finish on exposed tube - Easy step-by-step instructions - Lifetime warranty on hardware against manufacturer defects dimensions: Hardware Shipping Assembled unit: 30”w x 78.38”h x 23.6”d 762mm(w) x 1990mm(h) x 600mm(d) Shipping dimensions - ships in 1 case: OCH2 case: 50”l x 30”w x 15”h 1270mm(l) x 762mm(w) x 381mm(h) Approximate shipping weight (entire kit): 70 lbs / 31.75 kgs additional information: Monitor mount holds max weight 50lbs / 22.7kgs Monitor mount holds max size 40” / 1016mm We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications. 04/17/15 Base color options: silver black mahogany natural Parts included Part Label Qty Upper frame x1 Lower frame x1 Joiner x4 Base plates x2 Base x1 Monitor bracket x1 1. Step 1. Connect the plates to the base using four screws per plate as shown in the attachement detail below. Assure holes on tubing are facing inward. BASE TO PLATE T Thumbscrews Take four thumbscrews and attach the plate . 2. Step 2. Attach the lower frame to the base plates at points 1A and 2A following the labels. Use the joiner to connect as shown in the attachment detail below. Attach the upper frame to the lower frame at points 3A and 4A following the labels. Use the joiner to connect as shown in the attachment detail below. 3A 3A 3A 4A 4A 4A 1A 1A 2A 2A 1A 50mm TUBING STEP 1 SLIDE THE JOINER INTO THE TUBING SO THE THE HEX SCREW SITS IN THE HOLE ON THE orientation of holes TUBING STEP 2 TIGHTEN THE HEX SCREW SO THE JOINER SEPERATES AND TIGHTENS AGAINST THE INSIDE OF THE TUBING, LOCKING THE JOINER AND TUBING TOGETHER 2A HEX SCREW TUBING JOINER HEX SCREW 1 50mm TUBING 1 3. Step 3. To attach the monitor mount, put square head bolts through the back of the pre-drilled tube. Slide monitor mount onto bolts and secure with wingnuts. Position mount where desired. MEDIUM MONITOR TO 30MM TUBE TUBE SQUARE HEAD BOLTS THROUGH TUBE M-M MB TUBE M-M MB 4. Check out these related products: Vibe Kit 01 Vibe Kit 02 Vibe Kit 03 Vibe Kit 04 Vibe Kit 05 Vibe Kit 06