Transcript
vibrafoam S100
Product Data Sheet Nr. 94712 ‐ R ‐ 02 Edition: November 2012
1. Application Sector DAMTEC® vibrafoam S100 is a mat for the absorption of vibrations as well as for impact sound insulation. It has unique compression recovery capability and has exceptionally resilient characteristics. The ideal area of application is for a static material pressing up to 1,7N/mm². The dynamic working range is up to 2.5N/mm² 2. Material Mixed cellular polyether urethane. 3. Appearance colour: black surface: closed 4. Dimensions/Tolerances width: 500 mm length: 2000 mm thickness /: 12.5 mm and 25 mm The data sheet is not subject to any change service! All information is without guarantee. With the publication of this product data sheet all former issues cease to be valid. KRAIBURG Relastec GmbH & Co.KG Fuchsberger Straße 4 ∙ D‐29410 Salzwedel Fon +49‐(0) 86 83‐701‐1 42 ∙ Fax +49‐(0) 86 83‐701‐41 42 christina.wallner@kraiburg‐relastec.com ∙ www.kraiburg‐relastec.com/damtec
1.5 % 1.5 % 1.0 mm
Seite 1 von 4
vibrafoam S100
Product Data Sheet Nr. 94712 ‐ R ‐ 02 Edition: November 2012
5. Physical Characteristics tensile strength: elongation at break: flammability rating: compression set: static load: dynamic loads: load peaks: 6. Installation:
> 5.0 N/mm² > 250 % B2 < 10% < 1.7 N/mm² < 2.5 N/mm² < 8.0 N/mm²
(DIN 53455‐6‐4) (DIN 53455‐6‐4) (DIN 4102) (DIN 53572)
Installation is to be carried out in accordance with the DAMTEC® vibra installation instructions. DISCLAIMER: The information provided is intended only as a summary and general overview on matters of interest. The information is not intended to be comprehensive nor does it constitute expert advice. KRAIBURG RELASTEC shall not be liable for incidental and/or consequential damages directly or indirectly sustained, nor any loss caused by not complying with relevant industry/product standards and improper use of any Damtec® products. Due to varying construction methods, any other circumstances not stated above should be brought to the attention of KRAIBURG RELASTEC for review. For suitability to the prevailing site conditions, it is advised that certified testing should be conducted. It is recommended to seek further advice on your application with our technical staff prior to use.
The data sheet is not subject to any change service! All information is without guarantee. With the publication of this product data sheet all former issues cease to be valid. KRAIBURG Relastec GmbH & Co.KG Fuchsberger Straße 4 ∙ D‐29410 Salzwedel Fon +49‐(0) 86 83‐701‐1 42 ∙ Fax +49‐(0) 86 83‐701‐41 42 christina.wallner@kraiburg‐relastec.com ∙ www.kraiburg‐relastec.com/damtec
Seite 2 von 4
vibrafoam S100
Product Data Sheet Nr. 94712 ‐ R ‐ 02 Edition: November 2012
specific load [N/mm²]
7. Spring characteristic 4,00 3,75 3,50 3,25 3,00 2,75 2,50 2,25 2,00 1,75 1,50 1,25 1,00 0,75 0,50 0,25 0,00
25mm
12,5mm
37,5mm
50mm
0
1
2
3
4
5
6
7
8
deflection [mm] rd
(recording of 3 loading, at room temperature, v= 1% the thickness per second, shape factor q=2)
elastic modulus [N/mm²]
8. Static and dynamic modulus of elasticity 120 110 100 90 80 70 60 50 40 30 20 10 0
10 Hz
statisch
0,00 0,25 0,50 0,75 1,00 1,25 1,50 1,75 2,00 2,25 2,50 2,75 3,00 3,25 3,50 3,75 4,00 specific load [N/mm²] (dynamic modulus: sinusoidal excitation with an oscillating range ±0,25 mm, static modulus: tangent modulus taken from the load deflection curve, test according to DIN 53513, shape factor q=2)
The data sheet is not subject to any change service! All information is without guarantee. With the publication of this product data sheet all former issues cease to be valid.
KRAIBURG Relastec GmbH & Co.KG Fuchsberger Straße 4 ∙ D‐29410 Salzwedel Fon +49‐(0) 86 83‐701‐1 42 ∙ Fax +49‐(0) 86 83‐701‐41 42 christina.wallner@kraiburg‐relastec.com ∙ www.kraiburg‐relastec.com/damtec
Seite 3 von 4
vibrafoam S100
Product Data Sheet Nr. 94712 ‐ R ‐ 02 Edition: November 2012
specific load [N/mm²]
9. Natural frequency 4,00 3,75 3,50 3,25 3,00 2,75 2,50 2,25 2,00 1,75 1,50 1,25 1,00 0,75 0,50 0,25 0,00
50mm
5
10
37,5mm
25mm
15
12,5mm
20
25
30
35
40
natural frequency [Hz]
Natural frequency of a single‐degree‐of‐freedom system consisting of a fixed mass and an elastic bearing based on a stiff subgrade, shape factor 2
10. Vibration insulation 120 99%/‐40dB
disturbing frequency [N/mm²]
110
98%/‐35dB
97%/‐30dB
94%/‐25dB 90%/‐20dB
100 90 82%/‐15dB
80 70
69%/‐10dB
60 50
0%/0dB
40 30 20 10 0 5
10
15
20
25
30
natural frequency [Hz]
The data sheet is not subject to any change service! All information is without guarantee. With the publication of this product data sheet all former issues cease to be valid.
KRAIBURG Relastec GmbH & Co.KG Fuchsberger Straße 4 ∙ D‐29410 Salzwedel Fon +49‐(0) 86 83‐701‐1 42 ∙ Fax +49‐(0) 86 83‐701‐41 42 christina.wallner@kraiburg‐relastec.com ∙ www.kraiburg‐relastec.com/damtec
Seite 4 von 4
