Viclaro Iv Gx Video Host Board Brochure

Transcript

ViClaro IV GX Host Board Overview The Microtronix ViClaro IV GX Host Board is a versatile video and image processing development platform targeting applications used in consumer, automotive and medical market segments. Featuring a Cyclone IV EP4CGX110 FPGA device, the ViClaro IV is an open architecture board supporting 3 Altera compatible HSMC headers enabling designers to select from a wide range of high-speed mezzanine card (HSMC) compatible daughter cards. One of the HSMC connectors support industry standard cards while the other two support 4 GX Tx/Rx transceiver interfaces capable of 600 Mbps to 3.125 Gbps data rates. To facilitate Camera Link Frame Grabber Full development, the ViClaro IV GX board provides extra clock inputs from the HSMC pins to programmable PLL clock synthesizers which resolve PLL design limitations on other FPGA development cards. The card provides 256 MB of DDR2 memory on a 64-bit data bus which enables the card to support HD video applications up to 1080p60. Key Features  Altera EP4CGX110 Cyclone™ IV FPGA  256 MB of 64-bit wide DDR2 memory  3 Altera compatible HSMC expansion headers o 2 Headers support 4 GX Tx/Rx transceivers  2 TI CDCE925 VXCO Clock Synthesizers  27MHz & 50MHz clock oscillators  miniSD Memory Card slot  Integrated USB Blaster circuitry  Evaluation license for Microtronix Avalon and Streaming Multi-Port DDR2 Memory Controller IP Cores Target Applications  HDTV systems  Video conversion/processing  Industrial vision systems  Medical diagnostic equipment  Camera Link camera/frame grabber equipment  Video test and measurement ViClaro IV GX Host Board Add-on Cards and Ordering Information HSMC Daughter Cards Gig-Ethernet / HDMI 1.3 Transmitter HDMI 1.1 Receiver/Transmitter         Marvel 88E11111 Triple Speed Ethernet PHY ADV7510 HDMI 1.3 HDMI transmitter 12-bit Deep Color TI CDDC925 dual programmable PLL clock synthesizer AD9880 Analog YPbPr / HDMI 1.1 receiver interface AD9889B 1.1 HDMI/DVI transmitter interface Quartus video loop-through reference design EDID support Camera Link Receiver HDMI 1.4 Transmitter         Dual MDR26 Camera Link connectors Supports Base, Medium and Full** CL receiver interfaces Power over Camera Link™ (PoCL) circuitry Quartus reference designs ** Full requires extra PLL available on ViClaro IV GX Host board Camera Link Transmitter  Dual MDR26 Camera Link connector s  Supports Base, Medium and Full CL transmitter interfaces  Quartus reference design Reference Designs ADV751 HDMI 1.4 transmitter interface 12-bit Deep Color up to 1080p 3D video ready Quartus reference design HDMI 1.4a Receiver     ADV7612 HDMI 1.4a receiver interface 12-bit Deep Color up to 1080p 3D video supported Quartus reference design Kit Contents Quartus Reference Designs are based on the Altera Video IP  ViClaro IV Host Board (VIP) suite of IP cores and supplied with HSMC daughter cards.  12VDC-120/240VAC adapter Refer to User Manuals for more details. They include:  CD with IP Cores and documentation  Open Cores Plus evaluation license for Microtronix Avalon  Looped HDMI – HDMI streaming video and Streaming Multi-Port DDR2 Memory Controller IP Cores  Camera Link Frame Grabber  HD video processing: 1080i-50/60 Input – de-interlaced to 1080i50/60, video frame grabber, 720p to 1080p video scaling, Picture-in-Picture (PIP), 3D video Ordering Information Part # 6282-00-00 6282-03-01 Rev: 1.1 Description HSMC Daughter Cards ViClaro IV GX Host Board 6266-01-01 Gig-Ethernet / 1.3 HDMI Transmitter ViClaro IV GX Camera Link Development Kit 6256-00-00 HDMI 1.1 Receiver/Transmitter 6283-01-01 Camera Link Receiver 6287-01-01 Camera Link Transmitter 6290-01-01 HDMI 1.4 Transmitter 6291-01-01 HDMI 1.4 Receiver Unit 126 4056 Meadowbrook Drive, London, Ontario N6L 1E3 Canada Phone +01-519-690-0091 Fax +01-519-690-0092 Product specifications subject to change without notice Pg. 2 / 2